Please click here to check who's online and chat with them.

Find Verified Pfa Acid Purification System Suppliers, Manufacturers and Wholesalers

Jun-14-23
 
Product Features:
1. PFA material (translucent)
2. High and low temperature resistance: -200C to 260C
3. Strong acid and alkali resistance, high temperature resistance
4. No dissolution and precipitation, no contamination of samples
5. The principle of sub-boiling distillation and heat radiation.
6. Innovative advantages: Timed and segmented temperature control, annular heating jacket, liquid level gauge, pagoda-shaped condensation chamber

Product Specifications:
500ml/1/2/4/5/6L
Oct-17-24
 
Reagent contamination can elevate the background concentration of analytes in a sample, making it essential for laboratories to invest in high-purity acids for trace metal analyses. With limited sample sizes, maintaining low blank levels is crucial for reproducibility. NJbinglabâ??s SCH sub-boiling distillation systems enable laboratories to produce their own high-purity acids at significantly reduced costs.

The chemical reagents utilized during analysis are a major contributor to analytical blanks. Sub-boiling distillation is recognized as the most effective method for acid purification. This technique employs Wrap-around silicone heating jacket to vaporize the surface liquid at a temperature typically 20 �°C below the boiling point.

In conventional distillation, the boiling process generates aerosolized particles, leading to contamination in the distillate. In contrast, the gentle surface evaporation used in sub-boiling distillation minimizes spray or droplet formation, resulting in high-purity acids.

Advantages:

1. Utilizes the same technology as commercial production for ultra-trace metals analysis.
2. Achieves up to 90% cost savings on ultra-pure acids by purifying lower-cost reagent-grade acids.
3. Allows you to purify only the quantity you need, when you need it.
4. Produces up to 90 mL per hour (SCH-III).
Aug-12-24
 
PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
Apr-18-24
 
Systems with different specifications have different acid production rates:
1L acid production rate: 50ml/1h
2L acid production rate: 70ml/1h
4L acid production rate: 90ml/1h

Our acid purification system is specially designed to reduce metal impurities in organic solutions. Generally, for an acid with a metal impurity content of 10 ppb, after one purification, the metal impurity content can be reduced to about 0.01 ppb.
#ICPMS #acidpurification
Jun-20-24
 
PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
126989 Pfa Acid Purification System Suppliers
Short on time? Let Pfa Acid Purification System sellers contact you.
May-13-24
 
PFA acid purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
GOLD Member
Nov-05-20
Supplier From Saint-Paul, France
GOLD Member
Nov-29-20
 
Warranty: 2 years
After-sale Service: Online technical support
Material: metal
Shelf Life:2 years
Instrument classification:Class II
Safety standard: none
Application: Cardiology
GOLD Member
Sep-12-19
Supplier From Istanbul, Turkey
GOLD Member
Nov-19-20

Stearic Acid

$300
MOQ: Not Specified
Supplier From Saint-Paul, France
 
Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48


Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
GOLD Member
VERIFIED
Jan-05-21
Supplier From Faridabad, Haryana, India
 
We deals in the following products :-
1) Hydrochloric Acid
2) DOP
GOLD Member
VERIFIED
Jun-28-21
Supplier From Faridabad, Haryana, India
 
We are supplier and exporter of Hydrochloric Acid.

Hydrochloric acid is a strong inorganic acid that is used in many industrial processes such as refining metal, vinyl chloride mfg , leather processing etc...

Hydrochloric Acid: U.N.NO 1789.Chemical Formula HCL Packing : 40 Kgs HDPE Jars or 250 Kgs HDPE Drums. Physical Property : Clear water white liquid having Sp.Gr.at 25oc - 1.14 to l.16 Chemical Property : Acidity as HCL 30-32% Sulphate as H2SO4 not more than 0.1% Iron as (FE) 0.002 to 0.003%
GOLD Member
VERIFIED
May-19-22
Supplier From Nanjing, China
GOLD Member
May-10-10
Supplier From Mumbai, Maharashtra, India
GOLD Member
Nov-25-20

Palm Fatty Acid Distillate

$200
MOQ: Not Specified
Supplier From Saint-Paul, France
 
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD.

Specifications:
Free Fatty Acids (as palmitic) 70% min
Moisture & Impurities 1.0% max
Saponifiable Matter 95% min(basis 97%)
GOLD Member
Nov-19-20

Quality Stearic Acid

$300
MOQ: Not Specified
Supplier From Saint-Paul, France
 
Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48


Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
GOLD Member
Nov-25-20
Supplier From Saint-Paul, France
 
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD.

Specifications:
Free Fatty Acids (as palmitic) 70% min
Moisture & Impurities 1.0% max
Saponifiable Matter 95% min(basis 97%)
GOLD Member
Dec-31-19
Supplier From Vadodara, India
GOLD Member
Mar-17-15
Supplier From Colombo, Sri Lanka
GOLD Member
VERIFIED
Jun-20-22

Phosphoric Acid E338, Cas No.7664-38-2

$1.45
MOQ: 1000  Kilograms
Sample Available
 
Phosphoric Acid, E338, CAS no.7664-38-2, a mineral acid, colorless, transparent syrupy liquid. Phosphoric Acid is an acidity regulator and nutrition agent for yeast food, and it applied to flavors, canned food and light drinks as well as used in wine making.

As an experienced Phosphoric Acid manufacturer and supplier, we has been supplying and exporting Phosphoric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.


Phosphoric Acid Specification
NO. Specifications Phosphoric Acid Industrial Grade Phosphoric Acid Food Grade
1 Appearance Colorless, transparent syrupy liquid or in very light color
2 Colour 30 20
3 Assay (as H3PO4 )% 85.0 85.0
4 Chloride(as Cl- )% 0.0005 0.0005
5 Sulphats(asSO42- )% 0.005 0.003
6 Iron (Fe)% 0.002 0.001
7 Arsenic (As)% 0.005 0.0001
8 Heavy metals,as Pb% 0.001 0.001
9 Oxidable matter (asH3PO4)% 0.012
10 Fluoride,as F% 0.001
126989 Pfa Acid Purification System Suppliers
Short on time? Let Pfa Acid Purification System sellers contact you.