Pfa Acid Purification System

Reagent contamination can elevate the background concentration of analytes in a sample, making it essential for laboratories to invest in high-purity acids for trace metal analyses. With limited sample sizes, maintaining low blank levels is crucial for reproducibility. NJbinglabâ??s SCH sub-boiling distillation systems enable laboratories to produce their own high-purity acids at significantly reduced costs.

The chemical reagents utilized during analysis are a major contributor to analytical blanks. Sub-boiling distillation is recognized as the most effective method for acid purification. This technique employs Wrap-around silicone heating jacket to vaporize the surface liquid at a temperature typically 20 �°C below the boiling point.

In conventional distillation, the boiling process generates aerosolized particles, leading to contamination in the distillate. In contrast, the gentle surface evaporation used in sub-boiling distillation minimizes spray or droplet formation, resulting in high-purity acids.

Advantages:

1. Utilizes the same technology as commercial production for ultra-trace metals analysis.
2. Achieves up to 90% cost savings on ultra-pure acids by purifying lower-cost reagent-grade acids.
3. Allows you to purify only the quantity you need, when you need it.
4. Produces up to 90 mL per hour (SCH-III).

PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.

PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.

PFA acid purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.

2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.

It is resistant to high temperature and corrosion.
Unique design to prevent dry burning and will protect itself after steaming dry.
No cooling water is used, and no pollution.

Used for the preparation of ultrapure acids in trace analysis, it can meet the low detection limit requirements of ICP-OES and ICP-MS and provide laboratory-grade ultrapure acids for demanding analytical applications, such as HNO3, HCL, HF and other commonly used laboratories. acid.
#aciddistillation #ultrahighpurityacid #subboiling #acidpurification

The PFA cleaning tank, also known as an acid tank, acid bath, square tank, or acid pickling tank, is a high-performance cleaning device specifically designed for industries such as semiconductors, photovoltaics, and optoelectronics. It is produced through integral molding using imported high-purity PFA raw materials, eliminating the risk of leakage. This cleaning tank can be used for storing high-purity reagents, cleaning wafers and chips, and placing on electric heaters to steam and clean laboratory utensils.

The NJbinglab PFA Vial Cleaning System offers numerous advantages that make it a preferred choice for laboratories and research facilities. Here are some of the key benefits of this system:

Advantages:
1.High Efficiency: The NJbinglab Vial Cleaning System is designed to clean a large number of vials quickly and efficiently. This helps save time and resources, enabling laboratories to focus on more important tasks.
2.Excellent Cleaning Quality: The system ensures thorough and consistent cleaning of vials, removing even the toughest residues and contaminants. This ensures that vials are ready for use without any risk of cross-contamination.
3.Automated Operation: The NJbinglab Vial Cleaning System offers an automated process that reduces the need for manual handling. This not only saves time but also minimizes the risk of human error and contamination.
4.Flexibility: The system can be customized to accommodate different sizes and types of vials, making it a versatile solution for various applications.
5.Safe Operation: Safety is a top priority in the NJbinglab Vial Cleaning System. It incorporates features such as enclosed cleaning chambers to minimize exposure to hazardous chemicals.
6.Eco-Friendly: The system uses efficient water and chemical consumption, minimizing waste and reducing the impact on the environment.
7.Cost-Effective: While the initial investment in the NJbinglab Vial Cleaning System may be higher than traditional manual cleaning methods, the long-term savings in terms of time, labor, and consumables make it a cost-effective solution.
8.Compliance with Standards: The NJbinglab Vial Cleaning System is designed to meet or exceed industry standards for cleanliness and contamination control, ensuring compliance with regulatory requirements.
In summary, the NJbinglab Vial Cleaning System offers a comprehensive solution for efficient, safe, and cost-effective vial cleaning, making it an invaluable asset for laboratories and research facilities.

The NJbinglab Vial Cleaning System offers numerous advantages that make it a preferred choice for laboratories and research facilities. Here are some of the key benefits of this system:

Advantages:
1.High Efficiency: The NJbinglab Vial Cleaning System is designed to clean a large number of vials quickly and efficiently. This helps save time and resources, enabling laboratories to focus on more important tasks.
2.Excellent Cleaning Quality: The system ensures thorough and consistent cleaning of vials, removing even the toughest residues and contaminants. This ensures that vials are ready for use without any risk of cross-contamination.
3.Automated Operation: The NJbinglab Vial Cleaning System offers an automated process that reduces the need for manual handling. This not only saves time but also minimizes the risk of human error and contamination.
4.Flexibility: The system can be customized to accommodate different sizes and types of vials, making it a versatile solution for various applications.
Safe Operation: Safety is a top priority in the NJbinglab Vial Cleaning System. It 5.incorporates features such as enclosed cleaning chambers to minimize exposure to hazardous chemicals.
6.Eco-Friendly: The system uses efficient water and chemical consumption, minimizing waste and reducing the impact on the environment.
7.Cost-Effective: While the initial investment in the NJbinglab Vial Cleaning System may be higher than traditional manual cleaning methods, the long-term savings in terms of time, labor, and consumables make it a cost-effective solution.
8.Compliance with Standards: The NJbinglab Vial Cleaning System is designed to meet or exceed industry standards for cleanliness and contamination control, ensuring compliance with regulatory requirements.
In summary, the NJbinglab Vial Cleaning System offers a comprehensive solution for efficient, safe, and cost-effective vial cleaning, making it an invaluable asset for laboratories and research facilities.