1. standard: API 7-1 non-magnetic drilling stabilizer
2.material:HHF choose the AISI 4145H MOD alloy steel as the material to provide customers with integral/ spiral stabilizer with the most advanced machines( 2500t forging press , CNC lathes, milling machine and so on .) .
3.We can produce the max outer diameter of the stabilizer is 36â??â??. HHFâ??s nonmagnetic
4.products are much higher than API standard in mechanical properties and permeability.We can also supply the OEM service.
Lowest price API 7-1 non magnetic spiral drill collar
Product Description
Drill Collar is the basic component in the BHA which provide weight on the bit for dirlling and keeps the drill string in tension.Drill collar is manufactured from AISI 4145H modified quenched and tempered steel and is heat treatment along its entire length for uniform toughness and durability. Srict netallurgical test are performed pre specifications to ensure that the heat treatment produces consisitent and maxium hardness through the depth of the bar.
Feartures and benefits:
1. hardness rannge of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature
2.Connections ar phosphate coated afther machinning to protect the threads from corrosive elements and to prevent galling upon initial make -up
Thread roots are cold rolled on API and H0-90 connections
3.Pressed steel thread protectors are supplied fo all drill collar that are equipped with standard connections
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
API 7-1 IB String Stabilizer with Non-magnetic Body
Product Description
The stabilizer with back reaming is selecting the appropriate location and through special processing method to array few teeth as a cutting edge. In this way, this stabilizer can be played cutting when the process of drilling and pull out. During drilling process, forward and backward redressing can be played the role to repair and maintain the wall of well, making trajectory of borehole as far as possible, more often than not leading to drilling difficulty because of hole shrinkage, and so on, at the moment, the forward and backward redressing of this stabilizer can be played cutting, to eliminate hole shrinkage phenomenon, thus saving time and costs for drilling.
Features
(1). Sizes and configurations can be manufactured to operators requirements, including blade sizes, connections, and types of material.
(2). All stabilizers connections can be configured as box Ã? box, as pin Ã? box, or as the operator requires.
(3). Welded straight blade for drilling soft formations.
(4). Sleeve type allowing less equipment inventory in remote locations.
(5). Integral spiral blade allowing 3600 hole contact for use in hard rock formations.
(6). Nonmagnetic stabilizers for applications requiring magnetic isolation.
Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.
Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
9528 Api 7 1 Non Magnetic Drilling Spiral Stabilizer Suppliers
Short on time? Let Api 7 1 Non Magnetic Drilling Spiral Stabilizer sellers contact you.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*
ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED
*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO
*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
1. soya meal gmo & non gmo.
2. canadian wheat
3. canadian red lentil
4. canadian green peas.
5. red seats oil.
6. soya oil.
7. non gmo granular fine white sugar icumsa 45
8. sulphur
9. ethanol
10 . degummed soya crude oil, non gmo yellow corn, canadian premium quality all purpose white flour
11. canadian canola seed, canola oil, canola meal
all shipment able to proceed, under 100% lc at sight condition.
GraThick is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch to enhance its thickening and stabilizing properties. It is used as functional food ingredient to improve the consistency of RTC gravies and gravy bases.
As Thickener:
GraThick is primarily used as thickener for RTC Gravies and gravy bases. It improves the consistency of gravies without hindering taste and flavour components. The starch granules in GraThick absorb liquid when added to the product. The granules starts swelling when heated, and then burst, releasing starch into liquid. The granules swell up to 30 times their
original size resulting in increased thickness and consistency of the product.
As Stabilizer:
RTC (Ready â??To- Cook) gravies and gravy bases usually undergo retort packaging to increase the shelf life. GraThick helps to maintain the stability of the product while retort packaging. RTC gravies will be reconstituted with
water before using. GraThick maintains the consistency and thickness of the product while reconstitution also.
ï?· GraThick can be used in the preparation of all types of RTC Veg and Non- veg gravies
ï?· It can also be used in gravy â?? bases of all cuisines(Traditional and International)
ï?· It can also be used in RTU Gravy masalas
DOSAGE
Use 1 to 3% GraThickTM of total batch size. For excellent results, maybe use upto 5% GraThickTM of total batch size.
Angel RS 3700-Modified Starch-E1413 is Maize starch based Phosphated Distarch Phosphate (E-1413). The Resistant starch (High dietary fiber) is Vegan, Gluten-Free and Plant-based and Non-GMO. It can be used as a Thickener, Emulsifier, Binder and Stabilizing agent in Sauce, Ketchup, Beverages, Confectionary products, Processed food, Bakery products, Biscuits, Cookies and Dairy products. "1. It is highly bio-degradable and causes no harm to the Environment.2. Angel RS 3700-Modified Starch- E1413 Maize based is a resistant starch.3. It contains 75% dietary fibre which is easily digestible.4. Angel RS 3700-Modified Starch- E1413 Maize based is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.5. Angel RS 3700-Modified Starch- E1413 Maize based contains no fat, protein, vitamins, or other minerals." "APPLICATIONS
As a Thickener and Stabilizer:
Angel RS 3700-Modified Starch-E1413 Maize based can be used in foods as a bulking agent and stabilizer. Gives medium smooth thickness & texture to the products like Ketchup, Chili Sauce, Soy Sauce, Chocolate sauce, Canned foods, Baked Foods, Gravies, Yoghurt, Jelly, Pudding, Bakery products Biscuits, Cookies and Dairy products.
For Shear Applications :
Angel RS 3700-Modified Starch- E1413 Maize based has high process tolerance, it is resistant to high heat and shear. It has high resistance against acids, sugar, salt and excellent freeze/thaw stability. It adds luster to the products, making them more appealing.
For Gluten-Free Products:
It contains 75% dietary fibre which is easily digestible. Even it can be used as a Gluten-Free substitute in various foods including baby foods, confectionery, jelly type sweets, iced lollies, wine gums, yogurts, fruit-flavored fillings and batter mixes to egg white mix.
For Candy and Confectioneries:
It is particularly applied in candy making as it helps to form shell like structure easily. The starch that is gelatinized is applied in preparing jelly confectioneries as it transforms the gummy ingredients into candies with soft texture."
PK-386 Steam Rice | FOB Pakistan, Africa | Long Grain Non-Basmati Premium Rice
Price : USD 735
Product Description :
PK-386 Steam Rice is a premium non-basmati long-grain rice variety grown in Pakistan and select African regions, known for its affordability, subtle aroma, and superior cooking results. With excellent elongation and a soft texture, it's ideal for both retail and food service markets. Our rice is double polished and low in broken grains, ensuring consistent quality in every shipment.
Key Features:
Long Grain Non-Basmati Variety with Subtle Aroma
Excellent Cooking Quality Fluffy & Non-Sticky
Low Broken & Chalky Grains
Hygienically Processed & Silky Polished
Ideal for Household, Catering, and Bulk Supply
Competitive Pricing with Reliable Export Logistics
Packaging & Delivery:
Price: FOB Pakistan $735 per MT
Minimum Order: 25 MT (1 x 20FT Container)
Packaging Options: 5kg, 10kg, 25kg, 50kg PP Bags or Customized Packaging Available
Certification & Compliance:
ISO: ISO 22000 Food Safety Management
HACCP: HACCP Certified Rice Processing
HALAL: HALAL Certified for Muslim Markets
Contact Us for Competitive Prices & Samples.
Secure premium-quality PK-386 Steam Rice with consistent supply and competitive pricing.
Inquire now for a detailed quotation and build your long-term partnership with KHUMSUB â?? a trusted supplier of Pakistan Steam Basmati and Non-Basmati rice.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
Brazilian origin Icumsa 45 white refined sugar available for CIF term. Procedure as follows:
1. Buyer issues a Letter of Intent (LOI) that includes the terms and other conditions listed here
with their requested product, quantity and requested price.
Once the LOI is received from the Buyer, the seller will issue the COMPLETE
CORPORATE OFFER (FCO) within 48 hours confirming the product, quantity and selling
price.
2. Buyer confirms and approves the FCO within five (5) days; signed and stamped, and
attaches their ICPO + CIS to the seller. In countries where government clearance and/or quota is
required, proof of such customs clearance and/or quota will be required at time of ICPO.
3. At the Buyerâ??s request and sellerâ??s discretion, a meeting with the buyer and buyer's legal
representative and seller may take place via zoom, google meet or similar. ( Optional )
4. After the signed FCO + ICPO + CIS has been received, verified and approved (and any necessary
meetings taken place), the seller will issue the contract (SPA) to the buyer on the agreed
terms.
5. Once the contract is drawn up and accepted by the buyer, the buyer must return the
contract within a maximum of two (3) days.
6. After receiving the contract accepted by the buyer, the seller will send a signed, sealed
copy to the buyer together with the Proforma Invoice (PI)
7. Buyer will have 48 hours to signs and return the Invoice.
8. Once the Invoice is accepted in-full, the Buyer and Seller will deposit a copy of the fully
executed contract (SPA) with the respective banks.
9. Within seven (7) days from the deposit of the contract (SPA), the buyerâ??s bank will issue the
financial instrument ( MT 760 SBLC / MT 700 DLC ), 100% open, confirmed,
irrevocable, non transferable, divisible, and negotiable for the total amount of one month,
renewable during the duration of the contract plus one day. Buyer's issuing bank must be
a first-class, global bank accepted by the sell
FOB: PROCEDURE TANK TO TANK (TTT)-2
NON-NEGOTIABLE
F.O.B. FREE ON-BOARD TANK TO TANK PROCEDURE (DIP AND PAY)
1. Buyer issues ICPO and Company Registration Certificate or any I.D. With TSA for
seller's verification.
2. Seller issue Draft Commercial Invoice, Buyer signs and returns to Seller with his Tank
Storage Agreement.
3. Seller lease and pays the buyer's tank for 3 days for the tank to tank Injection Process,
Buyer do pay his Tank Farm Company for 2 days after the Tank Farm Company has received
the payment from Seller Company. (Note: If buyer has existing TSR and or buyer can provide
TSR after the sign of commercial invoice on its own, there will be no need for joint payment
for the buyer tanks.
4. Seller provides buyer with FULL POP Documents:
Fresh SGS Report less than 48 hours
Dip Test Authorization-Unconditional
Injection Report
Storage Receipt with GPS Coordinates
Tank Farm Bar-code Information
Letter of Commitment to Supply.
Registration Certificate & Export License Copy
Authority to Sell & Collect (ATSC)
Endorsed Injection Schedule by the buyer & buyer Tank Farm
ATV - For Physical Verification
Irrevocable Commitment to Supply for Spot and 12 months Contract
Injection Schedule signed by buyer & buyer's tank farm
5. Buyer conducts Dip-Test in seller's tank; via SGS on buyer's cost seller inject the fuel
into buyer's tank and Buyer makes payment based on Q&Q by MT103 wire transfer / TT
according to the final Commercial Invoice.
6. Seller transfers the title of ownership as per Buyer's instruction. Buyer lifts the
product.
7. Seller pays all intermediaries involved in the transaction and subsequently monthly
contract shipment continues as per terms and conditions of the sales and purchase
agreement contract between buyer and seller
Product: Jet A1 fuel
Origin: Kazakhstan
QTY: Trial 2million BBL Followed by any qty per month X 12months contract.
Product: Diesel fuel EN590 10PPM
Origin: Kazakhstan
QTY: Trial 100,000. MT Followed by any qty per month X 12months contract.
FOB TRANSACTION PROCEDURES FOR TANK TO TANK DIP& PAY
1) Buyer issue ICPO containing the seller's working procedure and banking details along with company registration
certificate, buyer data page of buyerâ??s Passport with buyerâ??s Nominated TSA for refinery verification and approval.
2) Seller issues commercial invoice (C.I.), buyer signs and return commercial invoice along with an acceptance letter.
3) Seller issues a copy of SGS Report to buyer's Tank Farm Company only to verify SGS Report with a Confidentiality &
Non-Circumvent letter.
4) Upon confirmation of SGS Report by Buyer's Tank Farm Company, Seller request to leases and pays the buyerâ??s tank
for 2 days, and Buyer pays his Tank Farm Company for 3 days after Tank Farm Company confirms the payment from
Seller. A total (5) days of operational TSR will be issued on seller/buyers name for a minimum of XXXX to XXXX GALS /
BBLS / MT.
5) Sellerissuesfollowing POP documentsto buyer:
A. Q&QReport
B. Pre Injection Report(Fromrefinery reservoir to leased tanks)
C. Unconditional Dip test authorization letter (DTA)
D. Authorization to sell
E. FreshUpdate SGS Report
F. Certificate ofOrigin
G. Authorization to verifyphysically the productin seller's tank(ATV)
6) Buyer and his testing teams conducts Dip test on the product and injection commence from seller's tank to buyer's
tank.
7) Upon completion of injection, seller issues full Injection reportto buyer and buyer makes 100% payment via MT103
for the total value of product injected into the tanks.
NOTE: The refinery will provide NCNDA/IMFPA immediately after step No.4 of the procedure.
Origin: Vietnam
Impurities: 1%
Usage: Medicine, cosmetics, food processing.
Color: Golden, purple
Shelf life: 12 months
Packing: PP bag and Carton
We have 4 types of Golden Cottonii Sea Moss:
Type 1: Salted prickly sea moss, 20-30% moisture
Type 2: Salted non-prickly sea moss, 20-30% moisture
Type 3: Non salted prickly sea moss, 5-7% moisture
Type 4: Non salted Non-prickly sea moss, 5-7% moisture
9528 Api 7 1 Non Magnetic Drilling Spiral Stabilizer Suppliers
Short on time? Let Api 7 1 Non Magnetic Drilling Spiral Stabilizer sellers contact you.
