We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Lowest price API 7-1 non magnetic spiral drill collar
Product Description
Drill Collar is the basic component in the BHA which provide weight on the bit for dirlling and keeps the drill string in tension.Drill collar is manufactured from AISI 4145H modified quenched and tempered steel and is heat treatment along its entire length for uniform toughness and durability. Srict netallurgical test are performed pre specifications to ensure that the heat treatment produces consisitent and maxium hardness through the depth of the bar.
Feartures and benefits:
1. hardness rannge of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature
2.Connections ar phosphate coated afther machinning to protect the threads from corrosive elements and to prevent galling upon initial make -up
Thread roots are cold rolled on API and H0-90 connections
3.Pressed steel thread protectors are supplied fo all drill collar that are equipped with standard connections
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
7044 Api 7 1 Non Magnetic Drill Collar Nmdc Suppliers
Short on time? Let Api 7 1 Non Magnetic Drill Collar Nmdc sellers contact you.
1. soya meal gmo & non gmo.
2. canadian wheat
3. canadian red lentil
4. canadian green peas.
5. red seats oil.
6. soya oil.
7. non gmo granular fine white sugar icumsa 45
8 urea fertilizer, sulphur
9. ethanol
10 . degummed soya crude oil, non gmo yellow corn, canadian premium quality all purpose white flour
11. canadian canola seed, canola oil, canola meal
all shipment able to proceed, under 100% lc at sight condition.
Origin: Vietnam
Impurities: 1%
Usage: Medicine, cosmetics, food processing.
Color: Golden, purple
Shelf life: 12 months
Packing: PP bag and Carton
We have 4 types of Golden Cottonii Sea Moss:
Type 1: Salted prickly sea moss, 20-30% moisture
Type 2: Salted non-prickly sea moss, 20-30% moisture
Type 3: Non salted prickly sea moss, 5-7% moisture
Type 4: Non salted Non-prickly sea moss, 5-7% moisture
Origin: Vietnam
Impurities: 1%
Usage: Medicine, cosmetics, food processing.
Color: Golden, Purple
Shelf life: 12 months
Packing: PP bag or Carton
We have 3 types of Golden Cottonii Sea Moss:
Type 1: Salted prickly sea moss, 20-30% moisture
Type 2: Salted non-prickly sea moss, 20-30% moisture
Type 3: Non salted prickly sea moss, 5-7% moisture
Origin: Vietnam
Impurities: 1%
Usage: Medicine, cosmetics, food processing.
Color: Golden, Purple
Shelf life: 12 months
Packing: PP bag or Carton
We have 3 types of Golden Cottonii Sea Moss:
Type 1: Salted prickly sea moss, 20-30% moisture
Type 2: Salted non-prickly sea moss, 20-30% moisture
Type 3: Non salted prickly sea moss, 5-7% moisture
Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes.
PRODUCT COMPATIBILITY:
FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel.
PRODUCT APPLICATIONS:
FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids.
Specifications:-
PRODUCT : FH-35 FH-38 FH-42
CAS No. : 9000-30-0 9000-30-0 9000-30-0
Granulation : FINE FINE FINE
APPEARANCE : OFF WHITE POWDER
MOISTURE : 8% Max. 8% Max. 8% Max.
PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max
ASH : 1.5% Max. 1.5% Max. 1.5% Max.
ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max.
CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min
pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5
VISCOSITY :
(0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42
5 Mins : 37 5 Mins : 39 5 Mins : 43
30 Mins : 39 30 Mins : 42 30 Mins : 45
60 Mins : 40 60 Mins : 43 60 Mins : 47
Guar Gum Split is refined endosperm derived from guar seed or cluster bean (cyamoperm tetragonoloba). Guar Splits are non-ionic polysaccharide galacomannan. Guar Gum Refined Split (Endosperm) is mechanically separated from guar seed which yields 28-30% of Refined Split. Guar beans are harvested and dried following the growing season. The beans are shelled from the pods, the germ and hull removed. The resulting guar splits are wet-milled into powder; the powder is graded by granulation and quality. Products are re-blended according to specification, bagged and marked. Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. in powder form either directly plain Guar Gum Powder or in derived form. Uses : Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. These industries use Guar Gum in powder form either directly plain Guar Gum Powder or in derived form. We provide quality Guar Gum Splits to quality manufacturer of Guar Gum Powder, which is their pre-requirement for manufacturing high quality Guar Gum.
Specifications:
Color Pale-white
Gum Content 80-85%
Splits 92-98%
Mineral Matter (ASH) 1.5% max
Fiber 1.5 – 2.0 % max
Protein 5% Maximum
Ether Soluble Substances 0.6% Maximum
Acid insoluble ash (sand and/or silica) Traces
Black Split 1% max
Heavy Metals Nil
Appearance Bright creamy yellow
Packaging:
Type of Bags Quantity
HDPE Bags 50.00 Kgs
Jumbo Bags 1000.00 Kgs
The material and functions:
1. Hydrophilic non-woven: soft, make baby more comfortable.
2. Super Absorbent Polymer: Absorb the liquid effectively and instantly, keep surface dry all day to avoid wet back.
3. Blue Acquisition Distribution Layer: Make the liquid infiltrate quickly, prevent rewet and keep Baby's skin dry and clean.
4. Lamination film: breathable, prevent leakage and keep fresh.
5. PP tapes: go well with frontal tape, they can be used as many times as need.
6. Magic tapes/BIG ELASTIC EARS: can be used for many times, and big elastic ears are much more convenient for a better fit.
7. 3D rounder: avoid any side leakage.
8. Elastic waistband: Provide baby with a snug, comfortable circumstance.
Pampers Diapers
Huggies Diapers
Earth's Best Diapers
The material and functions:
1. Hydrophilic non-woven: soft, make baby more comfortable.
2. Super Absorbent Polymer: Absorb the liquid effectively and instantly, keep surface dry all day to avoid wet back.
3. Blue Acquisition Distribution Layer: Make the liquid infiltrate quickly, prevent rewet and keep Baby's skin dry and clean.
4. Lamination film: breathable, prevent leakage and keep fresh.
5. PP tapes: go well with frontal tape, they can be used as many times as need.
6. Magic tapes/BIG ELASTIC EARS: can be used for many times, and big elastic ears are much more convenient for a better fit.
7. 3D rounder: avoid any side leakage.
8. Elastic waistband: Provide baby with a snug, comfortable circumstance.
Pampers Diapers
Huggies Diapers
Earth's Best Diapers
Brazilian origin Icumsa 45 white refined sugar available for CIF term. Procedure as follows:
1. Buyer issues a Letter of Intent (LOI) that includes the terms and other conditions listed here
with their requested product, quantity and requested price.
Once the LOI is received from the Buyer, the seller will issue the COMPLETE
CORPORATE OFFER (FCO) within 48 hours confirming the product, quantity and selling
price.
2. Buyer confirms and approves the FCO within five (5) days; signed and stamped, and
attaches their ICPO + CIS to the seller. In countries where government clearance and/or quota is
required, proof of such customs clearance and/or quota will be required at time of ICPO.
3. At the Buyerâ??s request and sellerâ??s discretion, a meeting with the buyer and buyer's legal
representative and seller may take place via zoom, google meet or similar. ( Optional )
4. After the signed FCO + ICPO + CIS has been received, verified and approved (and any necessary
meetings taken place), the seller will issue the contract (SPA) to the buyer on the agreed
terms.
5. Once the contract is drawn up and accepted by the buyer, the buyer must return the
contract within a maximum of two (3) days.
6. After receiving the contract accepted by the buyer, the seller will send a signed, sealed
copy to the buyer together with the Proforma Invoice (PI)
7. Buyer will have 48 hours to signs and return the Invoice.
8. Once the Invoice is accepted in-full, the Buyer and Seller will deposit a copy of the fully
executed contract (SPA) with the respective banks.
9. Within seven (7) days from the deposit of the contract (SPA), the buyerâ??s bank will issue the
financial instrument ( MT 760 SBLC / MT 700 DLC ), 100% open, confirmed,
irrevocable, non transferable, divisible, and negotiable for the total amount of one month,
renewable during the duration of the contract plus one day. Buyer's issuing bank must be
a first-class, global bank accepted by the sell
7044 Api 7 1 Non Magnetic Drill Collar Nmdc Suppliers
Short on time? Let Api 7 1 Non Magnetic Drill Collar Nmdc sellers contact you.
