Our range of Muffle Furnace are best suitable for the laboratories and in various experiments. Muffle furnace is light weight with ceramic fiber wool insulation (instead of brick insulation).
The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Static Max temperature:1200
Working temperature:800
Power:6KW
Heating element: A resistance wire
Costing thermocouple and temperature range:Type K (0-1200)
Cost controller: Automatically adjusts the temperature between 30 slots
The temperature increases at a rate of 0 to 20 C/ min (Recommended =< 10.C)
Temperature control accuracy: 1
Sino Furnace material :Alumina ceramic fiber
Monolayer structure:Double shell with cooling fan at the bottom
DE-108 MUFFLE FURNACE RECTANGULAR ALTIS MAKE
Specification- Light weight ceramic fibre wool insulation (instead of Brick insulation). The outer casting is made of double walled thick P.C.R.C. Sheet, duly painted Heating elements are made of KANTHAL "A-1" wire and backed by high temperature cerwool insulation, which avoids loss of energy. Temperature is controlled through Digital Temperature Indicator-cum-Controller. To work on 220/230 volts or 440/440 volts A.C. Maximum Temp. 1200 degree C and working Temp. 1150 degree C.
MUFFLE SIZE- 200 x 100 x 100 mm, RATING- 1.0 KW
MUFFLE SIZE- 250 x 125 x 125 mm RATING- 2.0 KW
MUFFLE SIZE- 300 x 125 x 125 mm, RATING-2.5 KW
MUFFLE SIZE- 300 x 150 x 150 mm, RATING-3.5 KW
MUFFLE SIZE- 300 x 200 x 200 mm, RATING-4.0 KW
MUFFLE SIZE- 350 x 175 x 125 mm, RATING-4.0 KW
MUFFLE SIZE- 375 x 175 x 175 mm, RATING-4.5 KW
MUFFLE SIZE- 475 x 175 x 175 mm, RATING- 5.0 KW
1. Operation temperature: 1300°c (1400? for short time).
2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina
Fiber ceramic insulation.
3. Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier).
5. Power control with 30 segments programmable.
Descriptions
Chamber size
200x200x200mm (8"x8"x8")
Working temperature
1300? (continuous)
Maximum temperature
1400? (for short time)
Temperature control
30 steps programmable and pid automatic control
Heating rate
0~15?/min (suggestion: =10?)
Temperature accuracy
+/-1?
Heating element
Silicon carbide heating element(sic)
Working voltage
Ac 220v, single phase, 60/50 hz (or according to your requirement)
Max. Power
Approx 4 kw
Outside size
580x580x920mm
Net weight
130kg
Sx2-1-12tp muffle furnace of xinyoo
Chamber size100*100*100mm
power1kw max.
voltageAc 220v single phase, 50/60 hz
max. Temperature
Built in protection for over-heated and broken thermal couple.
Larger digital control panel (48 x 96 mm) for easy operation.
Chamber size:100x100x100mm (custimazed)
Max temp:1700deg.C
Working temp:1600deg.C
Accurancy:+-1deg.C
Heating element:mosi2 heating element
Controller:30 steps program and pid auto control
Thermocouple:b type
Free from big stalks and branches, the stevia leaves are used for producing the stevioside and liquid extracts of stevia.
Specification:
Moisture under 10 Ñ - 7, 01%
Stevioside - 10, 78%
Rebaudioside À - 3, 66%
Purity:
- dried green leaves - 90-95%;
- seeds, flowers and yellow leaves – 5-10%;
Harvest period: september - april
Packing:
Polypropylene bags per 25 or 50 kg
20"st contains 7500 – 8000 kg
40"st contains 15000 – 16000 kg
40"hq contains 18000 kg
Ground leaves
Dried ground stevia leaves are used in teas as natural sweeteners.
Specifications:
Purity:
- dried green leaves – 90-95%;
- seeds, flowers and yellow leaves - 5%-10%;
Size: 5 – 10 mm;
Color: green, light green.
Packing type: double polypropylene and polyethylene bags, per 7 kg.
Fine ground leaves
Fine ground leaves are used in tea bags, as well as in tea mixtures as natural sweetener and dietary supplement.
Specifications:
Purity:
- dried green leaves - 90%-95%;
- seeds, flowers and yellow leaves - 5%-10%;
Size: 1 – 2 mm;
Color: green, light green.
Packing type: double polypropylene and polyethylene bags, per 7 kg.
The muffle furnace is a profoundly progressed testing instrument that is utilized for contemplating the debris substance of the items. The instrument is utilized for turning a test into remains totally. At the point when the item is transformed into remains, it would be straightforward the compound properties of the item or the test. The test is initiated by putting the test in the heater, and afterward a warming curl delivers a high temperature of warmth which goes up to 1200 degree Celsius. This high temperature is accomplished without the utilization of flares. The test is kept at such a high temperature for a particular measure of time. From that point onward, the remains of the example are acquired and gauged utilizing an advanced equalization. The heaviness of the debris content gives the best assessment of the synthetic and physical properties of the items.
18259 Analog Type Industrial Muffle Furnace Suppliers
Short on time? Let Analog Type Industrial Muffle Furnace sellers contact you.
