T-558-N is a solid-type fatty polyamide resin especially designed for HOT-MELT
STRUCTUAL ADHESIVE uses. It has superior processing properties for its ready-to-apply nature
due to the lower molten viscosity. Optimum application temperature of T-558-N is in the
range of 180C~200C.
T-558-N shows excellent adhesion onto various types of plastics,
and steel, as well as onto many other surfaces, giving very tough bonding and sealing strength.
T-558-N may be applied either by hand or manually operated by hand-guns.
An automatic dispensing equipment with a nozzle or a wheel applicator may also be benefited.
Uses:it is fit to be used for the adhesion of materials like electric appliances, heat-shrinkable material, packing material, fabrics, leather, lumber, plastic, metal, ceramics, etc.
Performance:it is transparent, light yellow viscous solid, non-toxic, no stimulation, soluble in most organic solvents, non-soluble in water. It has good mechanical strength, good fluidity, excellent tenacity and high adhesion strength.
HT-45 is a high molecular weight polyamide resin especially
designed for hot melt adhesive use. It is easy to soluble in mixed organic
solvent , such as aliphatic or aromatic hydrocarbons and alcohols type solvent.
This resin has the characteristics of good mechanical strength, heat resistance, flexibility
and long open times(good workability).
This product is suitable for bonds to many difficult substrates including : PCB parts, metals, plastics, leather and fabric.
The BS - G705 Polyamide Hot Melt Glue Granules are engineered for robust, flexible bonds, these thermoplastic gems are essential in shoemaking and leather goods. From thermofolding to insole binding, trust these granules for professional results.
Chemical Nature: Copolyimide
Physical Specifications:
Softening Point (R&B): 100 - 110 C
Viscosity at 160 C: 3800-4800 mPa.s
Specific Gravity: 0.98 g/cm
Color: Transparent Amber
Mechanical Specifications:
Maximum Load: 10 N/mm
Ultimate Elongation: 15%
Modulus of Elasticity: 250 N/mm
Other Typical Specifications:
The co-solvent polyamide resin mainly used in gravure printing ink, plastic surface printing inks and hot melt adhesives.The alcohol polyamide resin mainly used in flexographic printing inks, gravure printing inks.Both of them are used in over-printing varnish.
43611 Polyamide For Hot Melt Suppliers
Short on time? Let Polyamide For Hot Melt sellers contact you.
Character
Nontoxic, nonirritating, high flash point and fire point not freeze under low temperature, good viscosity and good congluti-nation. It dissolves in the majority of solvents, never dissolve in the water.
Application
Dimer acid and amine will react to produce much different molecular weight polyamide resin. Mainly used to make graver?or flexo?printing ink, epoxy paint, the curing agent and the epoxy cementing material, lubricant .Dimer acid is used to make hot melt adhesive, which is widely used to make thermoplastic product and joint of electric cable in the posts and telecommunications, the communication equipment.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
HOT MELT BOPP TAPE --QUALITY EQUAL TO SHUR TAPE USA
WIDTH- 72 MM
LENGTH - 100 MTR. ROLL
THICKNESS- 1.8 MILL/ 0.046 MM
COLOUR - TRANSPARENT
WEIGHT- 350 GRAMS PER ROLL
PRINTING ON OUTER DIAMETER- NO
PRINTING IN CORE- YES- OUR LOGO
PACKAGING- 5 PLY CARTON
PRINTED CARTON- WEIGHT/ QTY MARKED
QTY PER CARTON- 24 PCS
QUALITY TEST VIDEOS
PEEL OFF TEST & GLUE STRENGTH TEST AT WEIGHT 40 KG PICKING
SHIPPING TERMS :
FOB CHINA PORT
PAYMENT- 100 % AGAINST TT
SPECIAL NOTE = Our quality match 100% with SHUR tape USA and we are supplying to US now. We can also provide any other size quote in same catagory.
We supply HMS1, HMS 2 and Cast iron, that is procured directly from scrap yards. These are processed in a manner to suit the requirement and in the ratio and composition desired by the buyer.
Polyamide, commonly known as nylon, is a general term for polymers containing amide groups in the repeating units of the main chain of macromolecules. Polyamide can be obtained by ring opening polymerization of internal acid amines, or by condensation polymerization of diamines and dicarboxylic acids. Polyamide (PA) refers to a polymer with a polar amide group (- CO-NH-1) in its main chain segment.
Product features:
1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness.
2. Good self lubrication and friction resistance. Nylon has good self lubrication and low friction coefficient, making it a long service life as a transmission component.
3. Excellent heat resistance. High crystalline nylon such as nylon 46 has a high thermal deformation temperature and can be used for a long time at 150. After being reinforced with glass fiber, the thermal deformation temperature of PA66 reaches above 250
4. Excellent electrical insulation performance. Nylon has a high volume resistance and high breakdown voltage resistance, making it an excellent electrical and electrical insulation material.
5. Excellent weather resistance.
6. Water absorption. Nylon has a high water absorption capacity, with saturated water reaching over 3%. To a certain extent, it affects the dimensional stability of the workpiece.
Product Usage:
Used as a room temperature curing agent for epoxy resin. Used as a curing agent and toughening agent for epoxy resin, and as a cable sealing material. Mainly used in the production of adhesives, coatings, sealing gaskets, etc
Our Hotmelt Adhesive stands out with superior strength, ensuring durable bonds for lasting
performance. Its unique formulation enables rapid melting, saving valuable time in application.
Experience exceptional mileage as Turbomelt optimizes efficiency with its advanced and efficient
composition.
Book Binding Adhesive
- Turbomelt range of pigmented and non pigmented spine adhesives
- Turbocool range of low temperature & non pigmented spine adhesives
- Turbomelt range of flexible hotmelt for better layflat and spine rounding
A solid type fatty polyamide resin synthesized by a polycondensation of mainly the dimerized fatty acid and the alkylenepolyamines.
The major applications is in the rotogravure printing inks .
(a). Good solubility into various conventional industrial solvents.
(b). Superior adhesion onto many kind of substrates.
(c). Good wetting( dispersion,)of the pigments and dyestuffs.
(d). Good resistance to water, oil and chemicals..
(e). Fast release of the solvent from the printed film..
(f). Smooth and hard film surface with high gloss.
(g). Smooth and hard film surface with high gloss, which is suitable for over-printings.
R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.
The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
43611 Polyamide For Hot Melt Suppliers
Short on time? Let Polyamide For Hot Melt sellers contact you.
