Product Description: DUBOND S PEAK is a no slip, high adhesion quartz adhesive. It can be applied upto 10 mm bed thickness. High dispersion copolymers hydraulic binders composed of only cement clinker in PEAK provides rheological mixture for a prolonged stability. It serves purpose of high resistance laying on flooring and wall of ceramic and homogeneous tiles and glass mosaic on cement based substrates.
The PVA is designed to glue papers, cardboard, wood, etc. Advantages: high gluing performance, versatile application, low consumption rate, packaging in large volumes (on a by-order basis). Characteristics: color: white; surface type: wood, paper, glass, leather, foam rubber, cloth, etc.; consumption rate: 80-150 g\m2; drying time: at a temperature of 20 C - 3 h; warranty period: 6 months; packing: 0.8 kg, 10 kg cans.
Dispersible adhesive for bonding glass veils (threads). Can be used for bonding packaging materials, gluing fiberglass wallpaper, vinyl, paper, textile and other wallpaper. Advantages: high gluing performance, high adhesion to wood, low consumption rate, packaging in large volumes (on a by-order basis). Characteristics: color: colorless; surface type: mineral surfaces, glass veils; consumption rate: 250-500 g\m2; drying time: at a temperature of 20 C - 30 min; warranty period: 12 months; packing: 3.5 kg, 10 kg buckets.
Dispersible adhesive for bonding untreated or lacquer-coated parquet, wooden items, chipboards, plywood onto the prepared surface in residential and public areas. Advantages: high gluing performance, high adhesion to wood, low consumption rate, packaging in large volumes (on a by-order basis). Characteristics: surface type: parquet, wooden items, chipboards, plywood; consumption rate: 600-1000 g\m2; drying time: at a temperature of 20 C - 4 h; warranty period: 12 months; packing: 3.5 kg, 10 kg buckets.
Modified Starch Glue This product is modified starch glue, non-toxic, harmless, non-corrosive and oxidation resistance, in line with environmental standards. It’s mature product which is widely applied on paper tubes, paper core, duplex board laminating, printing laminating, paper packaging and other industries. In the natural environment, this product is biodegradable easily. It’s a new generation of environmental-friendly. Product origin : China Type: Modified starch State: Powdery(semi-finished product),liquid(finished product) Appearance: light yellow Smell: Light Viscosity: 600100mPa.s(25 ) (Controllable) Finished product solid content: 58-62% (Controllable) P H: 101 Solubility: Soluble in water MOQ: 1 ton Packaging: 25 kg/bag, 500 kg/bag (semi-finished product); finished product can be packed according to customer’s requirement.
Silica gel for home silicone single rubber hook This kind of silicone hook is our patented product.It adopts a synthetic rubber glue material ,environment-friendly, can be reused for many times ,no trace left and no harm to the surface.After a period of long time,just wash it by water dry it ,then reuse again. Product origin : China 1. Removable, no stain and marks when remove 2. Washable and reusable 3. Durable and adaptable 4. Water proof and dust proof, can be used in bathroom 5. The maximum loading capacity can reach to 10KG 6. Other tapes of products is avaliable, such as storage shelf. MOQ: 500 pcs Packaging: Carton
Adhesive tapes, standard tapes, colored tapes, printed tapes, jumbo rolls.Designing carton sealing tape Making Cylinder Transport and Shipping
Property: Fire-retardant mastic is made from asphalt,polymer,mineral fillers and flame retardant, it is air-tight,waterproof,aging resistant and fire retardant.an ideal foam protection for foam glass and PU foam. Application. Packing: In 30kg each barrel..z
The New White Mastic Description "The new White Mastic is a white thick syrupy substance.Its main components are epoxy resin, organic solvent, plasticizers, flame retardants, film forming agent and fillers. It is mainly used as damp barrier for coldinsulation layer and roof buildings. It has all the advantages of asphalt based mastic ,besides it has better formability and wider working temperature range." Material Preparation "DO NOT THIN. Do not use sticks or boards,which would splinter or otherwise contaminate the product.Apply only to clean, dry, oil-free surfaces.Keep container closed when not in use. The new White Mastic cannot apply by spray." Application Outdoor and Heavy Duty Service-Apply a tack coat of The new White Mastic at a thickness of 1.6mm. Smooth membrane to avoid wrinkles and overlap all seams at least 5cm.Apply a finish coat of The new White Mastic at a minimum thickness of 3.2mm.This finish coat shall apply no later than 1 hour after the tack coat and shall completely cover membrane.This application shall zpro vide a minimum dry film thickness of 3.0mm. Specification and package 50 kg or 100kg /barrel Storage Store and apply between 4(40) and 38 (100).
Application: The main content of tn-1 series one-component adhesive and solvent-free polyurethane adhesive are polyether, additives and flame retardants, they are odorless and non-toxic materials, suitable to be operated at room temperature, suitable for brushing and spraying process, they can be self cured at room temperature, insoluble to solvent and water roof. Packing: 25kg each pail. - z
FG Cryogenic Adhesive Description FG Cryogenic adhesive is made from mixing and heat treatment of asphalt,polymer and polymer and plasticizers.it has high bonding strength and good anti freezing property.suitable to be used as binder for foam glass and PU at low temperature. Application "Surfaces must be free of moisture,loose scale and rust ,dust,oil and grease.Asphaltic primers,coal tars,siliconers,alkyd or other solvent senitive or thermoplastic Â primers or coating should not be used.some acceptable primers are zinc rich,polyester and epoxy,if in doubt,always check surface for adhesion before starting work with a test block ,apply a small block and let cure for a minimum of 24 hours,block should break before adhesive peels from surface. Blocks of insulation material should be checked Â for fit to the substrate surface before work started.blocks must be reshaped or cut smaller if they do not fit,especially on overhead work. Adhesive may be applied to either or both surfaces,Application to the rougher surface generally gives the best results." Standard Packing Specifications: 20kg bags, 50kg pails. z
Wear-resistant Agent Description Foam glass is a good material for cold insulation,it is high strengh,low thermal conductivity ,low water absorption,humidity resistance,freezing resistance,anti-corrosion and otheradvantages,but the surface of foam glass is breakable .we use wear-resistant agent to prevent the difference in high temperature influence of the enquipment or pipe when foam glass is used in multi-layer cold insulation.you can daub the wear-resistant agent on the foam glass in order to strenghen the wear resistance of it ,reduce the loss of cold energy,meanwhile extend the life time of the equipment. Packing packing: Drum weigh: 25Kg/drum Storage Store in a cool,dry,frost-free place. Normal storage conditions in up to 25 should provide indefinite shelf life.z
Emi shielding knitted wire mesh are resilient, conductive.They can provide high shielding performance applications in the magnetic and electrical fields.They are regularly used on cast, machined and sheet metal enclosures.It can be supplied in rolls, tube or cut forms.Any metal that can be produced in the form of wire. Main material of our emi shielding knitted wire mesh are tin phosphorus bronze(sn-ph-bz), tin plated copper clad steel(sn-cu-fe), silver-clad copper(ag-brass), monel and aluminium. The kinds of emi shielding knitted wire mesh:all metal knitted wire mesh, knitted wire mesh with elastomer core, knitted wire mesh tape, knitted wire mesh combination emc gasket and knitted wire mesh washer. If you need detailed information, please e-mail us. China emi shielding materials co., ltd
1- free sample for 1 roll tape 2- thickness 1.0 1.5 and 2.0mm 3- tape on edge of glass 4- red protect film 5- transparency and clear tape 6- duration: 30 years -
1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
Product: multifunctional protection and covering nonwoven with adhesive coating Material: nonwoven synthetic fleece in middle top with PE foile as liquid barrier bottom with anti-slip coating Colour : White Applications: tiled floor Parquet laminate flooring, textile floor Stairs Kitchen worktops, ceramics, sanitary ware, flat work Plants Features: non-slip on stairs no fixation with tape, for secure construction sites. impermeable, protects concrete against liquids of any kind (paint, solvents, ..) extremely robust and tear-resistant does not moult when wiping easy installation and disposal it can be wiped and vacuumed No residues were on the ground Benefits: Protects carpets, stairs, tiles against mechanical damage and stains from spilled liquids. Helps prevent accidents back with active antiskid Fast and wrinkle-free design time savings Used several times Cost savings Environmentally friendly, Free of harmful substances, thermally disposable Note: important for newly laid floors, porous stone floors and clay tiles is not suitable Installation: Lay 10 cm overlaps Packing role long 50M, 25M,10M roll width 100cm diameter ca 20cm,15cm,9cm