Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. Penetration Grade bitumens are specified by the penetration and softening point test. * SGC available * Delivery Terms: FOB Bandar Abbas or EXW * Payment: 30% prepayment and 70% against the copy of B/L
Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. ... Penetration Grade bitumens are specified by the penetration and softening point test.
Efsoo Petrochemical Company is capable of providing different grades of road surfacing bitumen in compliance with national and international standards. Bitumen is graded based on absolute viscosity at 60 ÂºC or kinematic viscosity at 135 ÂºC. The SI physical unit of dynamic viscosity is Poise and kinematic viscosity is expressed in CentiStokes. Pure bitumen has been graded based on AASHTO-M226 and ASTM-D3381 standards. PG is the latest standard of the day. This relatively new method classified bitumen is based on varying temperatures. It is a fully scientific method studying the mechanical specifications of bitumen. In this method, a temperature range is defined for bitumen and the consumer can easily choose the desired product.
oxidized bitumen with grades : - 115/15 -90/40 - 100/30 -95/25 - 85/25 also we can provide any special grade according to customer needs. we have different packaging like PE meltable bags , Ecofriendly easy release Bitu-box and regular steel drums .
Rabin international trading co, is considered to have one of the highest standards in the world with respect to its quality and the service to its clients. We offer Iran origin bitumen available world-wide. We are proud to supply Iranian bitumen in multiple grades 60/70, 80/100, 85/100, 85/25, and 40/50 just to name a few. Iran bitumen offers high quality bitumen in new steel drums and/or 1 metric ton jumbo bags on a FOB or CFR basis. Bulk bitumen is sold strictly on a FOB basis only. For ease of your transaction with us we offer either TT payment or LC payment. We welcome your firm inquiries and thank you in advance for choosing Iran bitumen for the construction of your roads which are essential in every infrastructure. It is a known fact that Iran bitumenâ??s 100% pure Vacuum Bottom based petroleum based road bitumen in comparison to Vacuum residue produced bitumen which has a minor price advantage lasts longer in the hot and in cold harsh climates, saving your Nation time and money in future repairs and expenses.
BITUMEN/PETROLEUM ASPHALT Requirement from Buyer is a Mast to answer your inquiries. 1. PRODUCT: 2. QUANTITY: 3. DESTINATION: 4. TERM CONTRACT Only ): 5. PAYMENT TERM: 6. TARGET PRICE: 7.Letter of Intent (LOI)
Our company is direct supplier of bitumen product , we guarantee lowest price around the world do not hesitate to contact us for price.
MC30 Property :Min : Max : Test Method Kinematic viscosity at 60 c mm2/s : 30 : 60 : ASTM D2170 Flash point (tag open-cup) , c : 38 : - : ASTM D3143 Distillate test: Distillate, volume, percent of total distillate to 360 c To 225 c : : 25 : ASTM D402 To 260 c : 40 : 70 : ASTM D402 To 316 c : 75 : 93 : ASTM D402 Residue from distillation to 360 c, Percent volume by difference 50 : : ASTM D402 Test on residue from distillation : Viscosity at 60 c : 30 : 120 : ASTM D2170 Penetration at 25 c : 120 : 250 : ASTM D5 Ductility at 25 c : 100 : - : ASTM D113 Solubility in trichloroethylene , % : 99 : - : ASTM D2042 Water, % : 0.2 : ASTM D95
Analysis : Unit : Limit : Test Method Density@25C : Kg/m : 1010-1060 : ASTM D70 or D3289 Penetration@25C : mm/10 : 40-50 : ASTM D5 Softening Point C : 52-60 : ASTM D36 Ductility@25C : cm : 100min : ASTM D113 Loss on Heating wt% : 0.2max : ASTM D6 Drop in Penteration after Heating : % : 20max : ASTM D5 Flash Point : C : 232min : ASTM D92 Solubility in Trichloroethylene : wt% : 99.0min : ASTM D2042 Spot Test : --- : Negative : A.A.S.H.O.T.102 Viscosity@60C P :4000 800 : ASTM D2171 Viscosity@135C : cSt : 400min : ASTM D2170
Item : Specification : Unit : Result/test Method (ASTM) 1 : SPECIFIC GRAVITY @ 25/25C : 1.00-1.06 : D-70 2: PENETRATION @25C 60/70 : D-5 3 : SOFTENING POINT(C) : 49/56 : D36 4 : DUCTILITY @ 25C : 100 Min : D-113 5 : LOSS ON HEATING (WT)% : 0.2 Max : D-6 6 : DROP IN PENETRATION AFTER HEATING % : 20 Max : D-6 & D-5 7 : FLASH POINT C : 250 Min : D-92 8 : SOLUBILITY IN CS2(WT)% : 99.5 Min : D-4 9 : SPOT TEST : NEGATIIVE : *A.A.S.H.O.T.102
Item:specification:unit:result/test method (astm) 1:specific gravity @ 25/25c:1.00-1.05:d-70 2:penetration @25c:80/100:d-5 3:softening point(c):45/52:d36 4:ductility @ 25c:100 min:d-113 5:loss on heating (wt)%:0.5 max:d-6 6:drop in penetration after heating %:20 max:d-6 & d-5 7:flash point c:225 min:d-92 8:solubility in cs2(wt)%:99.5 min:d-4 9:organic matter insoluble in Cs2(wt)% 0.2 max:d-4
Viscosity Grade Bitumen is widely used in spraying applications such as surface-dressing andpaving in very cold climate. It is also used to manufactureBitumen emulsion and Modified Bitumen products. Characteristics:VG-10:VG-20:VG-30:VG-40 Absolute viscosity.60C .poises. min:800:1600:2400:3200 Kinematic Viscosity.135 C .CST. min:250:300:350:400 Flash point. C. min:220:220:220:220 Solubility in trichloroethylene. % . min:99.0:99.0:99.0:99.0 Penetration a 25 C:80-100:60-80:50-70:40-60 Softening point. C. min.:40:45:47:50 Test on residue from thin film over test / RTFOT i. Viscosity ratio at 60 C. max:4.0:4.0:4.0:4.0 ii. Ductility at 25 C. cm. min. after thin film over test:75:50:40:25
Test:Methodology:30-40:40-50:60-70:85-100:100-120 Density:ASTM D-7:1/01-1/06:1/01-1/06:1/01-1/06:1/01-1/05:1/01-1/04 Penetration Rate At 25C, 10/mm ASTM D-5:30-40:40-50:60-70:85-100:100-120 Softening Point C:ASTM D-36:55-63:52-60:49-56:45-52:42-49 Ductility at 25C (cm):ASTM D-113:Min 100:Min 100:Min 100:Min 100:Min 100 Flash Point C:ASTM D-92:Min 250:Min 250:Min 250:Min 225:Min 250 Solubility in Disulfide %wt:ASTM D-4:Min 99/5:Min 99/5:Min 99/5:Min 99/5:Min 99/5 Stain Test:AASHTO T 102:Negative:Negative:Negative:Negative:Negative Weight Loss by Heating %wt:ASTM D-6:Max 0/2:Max 0/2:Max 0/2:Max 0/2:Max 0/2 Penetration Loss by Heating %:D-5-ASTM D-6:Max 20:Max 20:Max 20:Max 20:Max 20