Please click here to check who's online and chat with them.

Find Verified 16 Msc Axial Split Between Bearing Pump Suppliers, Manufacturers and Wholesalers

May-31-19
Supplier From Zibo, Shandong, China
 
Applications
Pipeline services: Mainline and Booster
Oil-extraction technology: on land and offshore, Refinery technology
Chemical / Petrochemical industries, General industry
Metallurgical and steel industries
Combined heating and Power stations
GOLD Member
Jul-25-17
 
Juniperus communis

Fam: Cupressaceae
Juniper is widely distributed throughout the northern hemisphere and its birthplace is obscure. It is found in Europe, North Africa, North America and northern Asia. The main commercial producers are Hungary and southern Europe, especially Italy. The berries were known to Greek, Roman and early Arab physicians as a medicinal fruit and are mentioned in the Bible. In the Renaissance, they were recommended against snake bite, and plague and pestilence. Because of its air-cleansing piney fragrance, the foliage was used as a strewing herb to freshen stale air and the Swiss burned the berries with heating fuel in winter to sanitize stale air. Gin, the alcoholic drink that gets its unique flavour from juniper berries, is named from an adaptation of the Dutch word for juniper, "geneva".
Spice Description

Initially hard and pale green, juniper berries ripen to blue-black, become fleshy and contain three sticky, hard, brown seeds. When dried, the berries remain soft but if broken open one will find the pith surrounding the seeds is easily crumbled.
Bouquet: Fragrant and flowery, combining the aromas of gin and turpentine.
Flavour:Aromatic, bittersweet and piny.
Hotness Scale: 1
Preparation and Storage

Juniper berries are at their best when they are still moist and soft to the touch, squashing fairly easily between one's fingers. It is possible to make a purée from juniper berries or to extract the flavour and aroma by macerating them in hot water, but as all parts are edible and the texture is agreeable, it is usually just as well to use the entire fruit, split or crushed. The berries are quite powerful, one heaped teaspoon of crushed fruits serving for a dish for four people. Store in a cool place in an airtight container.
Culinary Uses
Juniper berries perform a quite unique role, by contributing as much to the character of food through their 'freshening' ability, as they do by way of their specific taste profile. As well as flavouring a dish, juniper cuts the gaminess of game, reduces the fatty effect of duck and pork and perks up a bread stuffing. The strong hearty flavour of juniper goes well with strong meats, such as game. Pork chops, roast leg of lamb, veal, rabbit, venison and wild boar are all enlivened with a hint of juniper. Juniper berries blend well with other herbs and spices, especially thyme, sage, oregano, marjoram, bay leaves, allspice and onions and garlic. One application I am particularly fond of is in a simple chicken casserole, It can effectively be added to wine marinades for meats, and is used with coriander in smoking meat. It seasons pâtés and sauces and in Sweden. Goulash and Sauerkraut often feature a juniper taste, as do some home-pickled meats like salt beef, salt pork and ham. Generally juniper can well be used in any dish requiring alcohol. Fruit dishes, such as apple tart and pickled peaches, also harmonize with this flavour.
GOLD Member
VERIFIED
Jul-12-24
Supplier From Mumbai, Maharashtra, India
GOLD Member
VERIFIED
Mar-06-23
 
Belt press juicing machine for fruit vegetable
Use for :
01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice
04.Extraction of medicinal juice

1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee
2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life
3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise
4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content.
5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost
6. Juice yield 85%
Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw,
filter belt speed 1.5-3.5m
Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm
Width 1475-3430mm high 1820-2420mm
GOLD Member
Apr-26-25

Single Row Angular Contact Ball Bearing, P4,P5,P6,P2,P0

$2 - $200 / Box (FOB)
MOQ: 10  Boxes
Sample Available
Supplier From Pukou, Nanjing, China
 
Single Roller Angular Contact Ball Bearings:

As one of the popular types of bearings, Single Row Angular Contact Ball Bearing is designed to withstand both radial and axial loads. With improved performance and efficiency, these bearings are highly demanded in various industrial applications and offer an affordable yet reliable solution for machinery.

At our company, we are committed to providing our customers with the best quality Single Row Angular Contact Ball Bearings that are manufactured using advanced technologies and techniques. With our team of skilled professionals, we strive to deliver top-notch products that meet or exceed the expectations of our clients.

Features of Single Row Angular Contact Ball Bearings

There are many different types of bearings available in the market, but the Single Row Angular Contact Ball Bearing stands out due to its unique features. These are as follows:

1. High Load Capacity: Single Row Angular Contact Ball Bearings can withstand high radial and axial loads, making them ideal for use in machinery with heavy-duty applications.

2. Increased Efficiency: These bearings offer low friction and high accuracy, resulting in improved efficiency and less wear and tear on machinery.

3. Durability: With their robust build, these bearings have a long service life, reducing the need for frequent maintenance and replacement.

4. Versatility: Single Row Angular Contact Ball Bearings are utilized in various applications such as pumps, turbines, compressors, and machine tools, to name a few.

5. Easy Installation and Maintenance: The bearings are easy to install and once installed, they require minimal maintenance, making them a convenient choice for machine operators.

Applications of Single Row Angular Contact Ball Bearings

As mentioned earlier, Single Row Angular Contact Ball Bearings are used in various industrial and mechanical applications due to their high load capacity, increased efficiency, and durability. Here are a few applications where these bearings are most commonly used:

1. Machine Tools: These bearings are used in machine tools, such as lathes and drilling machines, to provide smoother and more accurate movements.

2. Pumps and Compressors: Single Row Angular Contact Ball Bearings are used in pumps and compressors to provide support and reduce friction, thus improving their efficiency.

3. Automotive Industry: These bearings can be found in the wheels and other moving parts of vehicles where they offer durability and increased performance.

4. Aviation Industry: These bearings are utilized in engines, landing gears, and other critical areas of aircraft, where they ensure smooth and reliable operation.

5. Industrial Robotics: Single Row Angular Contact Ball Bearings are widely used in industrial robots to provide accurate and fast movement, thus improving their overall performance.
6913 16 Msc Axial Split Between Bearing Pump Suppliers
Short on time? Let 16 Msc Axial Split Between Bearing Pump sellers contact you.
GOLD Member
May-16-25
Supplier From Ahmedabad, Gujrat, India
GOLD Member
Jun-17-22
Supplier From Amphoe Bang Phli, Samut Prakarn, Thailand
 
PRODUCT INFO
Puffball mushrooms range from small to very large in size, averaging 10-70 centimeters in diameter, and are round, oblong, to oval in shape. Some species are small, golf-ball sized, while others can grow as large as soccer balls. The white fruiting body can be smooth or bear some small scales, warts, or spines and is firm, airy, and spongy. There is also a protective coating that helps keep debris and dirt from entering the flesh. When sliced, the flesh should be pure white and never have any color. Puffball mushrooms are white when young and transition to a yellow-brown when mature and are rendered inedible when they reach this state. There are little to non-existent stems, and the spores are produced internally in the fruiting body. When young, Puffball mushrooms have a mild, nutty, and earthy flavor. Puffball mushrooms contain some phosphorus, manganese, selenium, and clavacin.

USES
Puffball mushrooms are best suited for cooked applications such as sauteing, pan-frying, and baking. Referred to as the �¢??breakfast mushroom" Puffball mushrooms pair well with egg dishes and are enhanced when sauteing and browned in simple ingredients such as garlic and butter. They can be sliced thinly and rolled with meat and vegetables, chopped into stir-fries, or grilled with marinades. They can also be cut into slices, battered, and fried, sliced and used as noodles in lasagna or ravioli, used as the dough in pizza, chopped into croquettes, blended into hummus, pureed into gravies, or dried and ground into a powder to use as a flavoring agent. The rotund mushrooms can be substituted for tofu or eggplant in many recipes. The flesh readily absorbs accompanying flavors so oil should be used sparingly. Puffball mushrooms pair well with tomatoes, broccoli, beets, rutabagas, radishes, turnips, parmesan cheese, garlic, poultry, scallops, crab meat, and tuna. They do not store well and should be used immediately after harvest. They can also be frozen between sheets of plastic and stored for extended use.

Season
Puffball mushrooms are available in the late summer through fall.
GOLD Member
VERIFIED
Apr-18-24

Magnesium Sulphate Hepta Hydrate

MOQ: 25  Metric Tonnes
Sample Available
Supplier From Pyramids, Giza, Egypt
 
Product name: Magnesium Sulphate Hepta Hydrate
HS Code: 28332100
Molecular Formula: MgSo4.7H2o
CAS No.: 10034-99-8

Magnesium Sulfate Heptahydrate is a kind of white crystalline powder with a chemical formula of MgSO4 �· 7H2O. It is odorless, salty, and bitter. It is easily soluble in water (119.8%, 20�°C), slowly soluble in glycerin, and slightly soluble in ethanol, and the aqueous solution is neutral. It is used as a nutrition fortifier (magnesium fortifier), curing agent, flavor enhancer, and processing aid. It improves the fermentation capacity, improves the flavor of synthetic sake (0.003%), and adjusts the hardness of the water.

Magnesium Sulfate Heptahydrate Application
Magnesium sulfate contains two elements (magnesium and sulfur) -

The First) The importance of magnesium in plants is due to its entry into the formation of the chlorophyll molecule.
It is also similar to calcium in the formation of the plasma membrane and is a bridge between the enzyme molecule and the phosphate group and plays an activating role for some enzymes responsible for the transformation of carbohydrate and nitrogenous substances in plants.
Magnesium helps seed growth, Plant afforestation, flower production, increases chlorophyll (Chlorophyll is responsible for the process of plant
photosynthesis), and improves the absorption of phosphorus and nitrogen.

The Second) The importance of sulfur for plants:
It is a sterilizing substance for the soil, as it kills microbes and bacteria present in the soil around the roots of the plant. Likewise, sulfur combines with the nitrogen present in the soil to form amino acids, which act as a chelating substance, binding to the divalent elements.
Due to the small size of amino acids, they permeate soil particles through plant roots and are easily absorbed, and the plant absorbs sulfur, magnesium, nitrogen, and other divalent elements.
it is used as a nutrition fortifier (magnesium fortifier), curing agent, flavor enhancer, and processing aid.

Magnesium sulphate â?¥ 98%
Magnesium (as magnesium oxide) â?¥16%
Sulfur â?¥ 12.7%
Water solubility: quickly soluble in water 100%
Colour: white crystals
Particle size: 0.1 - 2.0 mm

FOR ORDERS OR MORE INFO PLS CONTACT US FOR NOW (24/7)
GOLD Member
VERIFIED
Apr-08-24

Magnesium Magnesium Sulphate

MOQ: 25  Metric Tonnes
Sample Available
Supplier From Pyramids, Giza, Egypt
 
Product name: Magnesium Magnesium Sulphate / Magnesium Sulfate Salt (Epsom salt)
CAS 10034-99-8
Packing: 25 or 50 kg PP bags
HS Code: 28332100
Molecular Formula: MgSo4.7H2o


Magnesium sulfate contains two elements (magnesium and sulfur) -

The First) The importance of magnesium in plants is due to its entry into the formation of the chlorophyll molecule.
It is also similar to calcium in the formation of the plasma membrane and is a bridge between the enzyme molecule and the phosphate group and plays an activating role for some enzymes responsible for the transformation of carbohydrate and nitrogenous substances in plants.
Magnesium helps seed growth, Plant afforestation, flower production, increases chlorophyll (Chlorophyll is responsible for the process of plant
photosynthesis), and improves the absorption of phosphorus and nitrogen.

The Second) The importance of sulfur for plants:
It is a sterilizing substance for the soil, as it kills microbes and bacteria present in the soil around the roots of the plant. Likewise, sulfur combines with the nitrogen present in the soil to form amino acids, which act as a chelating substance, binding to the divalent elements.
Due to the small size of amino acids, they permeate soil particles through plant roots and are easily absorbed, and the plant absorbs sulfur, magnesium, nitrogen, and other divalent elements.

Magnesium sulphate â?¥ 98%
Magnesium (as magnesium oxide) â?¥16%
Sulfur â?¥ 12.7%
Water solubility: quickly soluble in water 100%
Colour: white crystals
Particle size: 0.1 - 2.0 mm

CONTACT US FOR MORE INFO NOW (24/7)
GOLD Member
Jun-20-25

Ball Bearing, stainless steel

$0.56 - $557 / Piece (FOB)
MOQ: 50  
Sample Available
Supplier From Ahmedabad, Gujrat, India
 
We are leading manufacturer, supplier and exporter of Ball Bearing in Ahmedabad, Gujarat, India. We manufactured all types of ball bearings like deep groove ball bearing, miniature ball bearing, angular contact ball bearing and thrust ball bearings in competitive prices. These bearings are majorly used in thresher machine, rotovator machine, dal mill machine, food processing machine, conveyor machine, automobile machine and pharma machinery & all types of agriculture machineries.

The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well.

Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball Bearings : 6301 2RS, 6302 2RS, 6304 ZZ, 6305 2RS, 6309 ZZ, 6311 ZZ, 6312 ZZ, 6201 2RS, 6201 ZZ, 6202 2RS, 6202 ZZ, 6203 2RS, 6204 2RS, 6205 2RS, 6205 ZZ, 6206 2RS, 6206 ZZ, 6207 2RS, 6207 ZZ, 6208 2RS, 6208 ZZ, 6213, 6001 2RS, 6005 2RS, 6007 2RS, 6013 2RS, 6017 2RS, 6024 2RS, 5203 ZZ, 44643/10, 62310 2RS, 608ZZ, 608 2RS, 607ZZ, 607 2RS, GE40ES 2RS, GE30ES 2RS.
Bearing Housing : UC208-24 FL3, UC209 FL3, UC211-32 FL3, UC213-40, UCP205 Black, UCP205-16 Black, UCP205 FL3, UCP205-16 FL3, UCP206 Black, UCF204, UCF205, UCT208, UCT210, UCT211, UCT212, UCT213.
GOLD Member
VERIFIED
Dec-02-24
Supplier From Ho Chi Minh, Viet Nam
 
A sugarcane plant is a tuft of between 5 and 20 upright stems, or "tillers", 2 to 5 metres tall and 2 to 4 centimetres in diameter. Each stem is a succession of nodes and internodes; each node bears a bud and a band of root primordia. The sugar is stored in the pith, under the hard, waxy bark.
GOLD Member
VERIFIED
Oct-25-20
 
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available

Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
 
V9-V10 Borewell Submersible Pumpset

Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times
GOLD Member
VERIFIED
Oct-25-20
 
V7 Borewell Submersible Pumpset

Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps

Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
 
V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times
GOLD Member
VERIFIED
Oct-25-20
 
V3 Borewell Submersible Pumpset

Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
 
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Feb-27-24
Supplier From Ghaziabad, Utter Paradash, India
 
The Bergamot tree can grow up to four meters high, with star-shaped flowers, and smooth leaves, bearing citrus fruit resembling a cross between an orange and a grapefruit but in a pear-shape. The fruit ripens from green to yellow. The name Bergamot is derived from the city Bergamo in Lombardy where the oil was first sold.
GOLD Member
VERIFIED
Oct-25-20
 
V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
Supplier From Rajkot, Gujarat, India
 
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
6913 16 Msc Axial Split Between Bearing Pump Suppliers
Short on time? Let 16 Msc Axial Split Between Bearing Pump sellers contact you.
Explore 16 Msc Axial Split Between Bearing Pump related import export discussions