1.Auto cutting and Sticking circle or half circle of bottle. Auto melting and attaching glue on top and rear of the label , glue auto recycling .
2.Variable speed control system, synchronous automatic detection system, automatic adjust production speed, Always make the labeling machine at best production speed
4.Servo motor synchronous tracking, with special designed vacuum drum adsorption, labeling precise and stable
5.Abnormal situation, this machine has safety device, automatic stop immediately.
6.Following conditions the machine will automatically stop and alarm:
(1) Label is not labeled on bottles
(2)Label sticker failure
(3)Label is about to run out
(4)Abnormal bottle feeding
(5)Abnormal bottle out
(6)Abnormal bottle jam
7.The whole machine centralized lubrication system, easy to clean, lubrication and maintenance.
8.Techmach electronic automatic rectify guide system, digital electronic eye for ultrasound method.Non-contact electric eye, automatically adjust the label location. (optional).
9. Label top and end difference within 2mm ( without Techmach), 1mm with techmach
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Nutmeg
Myristica fragrans
Fam: Myristicaceae
The nutmeg tree is a large evergreen native to the Moluccas (the Spice Islands) and is now cultivated in the West Indies. It produces two spices — mace and nutmeg. Nutmeg is the seed kernel inside the fruit and mace is the lacy covering (aril) on the kernel.
The Arabs were the exclusive importers of the spice to Europe up until 1512, when Vasco de Gama reached the Moloccas and claimed the islands for Portugal. To preserve their new monopoly, the Portuguese (and from 1602, the Dutch) restricted the trees to the islands of Banda and Amboina. The Dutch were especially cautious, since the part of the fruit used as a spice is also the seed, so that anyone with the spice could propagate it. To protect against this, the Dutch bathed the seeds in lime, which would prevent them from growing. This plan was thwarted however, by fruit pigeons who carried the fruit to other islands, before it was harvested, scattering the seeds. The Dutch sent out search and destroy crews to control the spread and when there was an abundant harvest, they even burned nutmeg to keep its supply under control. Despite these precautions, the French, led by Pierre Poivre (Peter Piper) smuggled nutmeg seeds and clove seedlings to start a plantation on the island of Mauritius, off the east coast of Africa, near Madagascar. In 1796 the British took over the Moloccas and spread the cultivation to other East Indian islands and then to the Caribbean. Nutmeg was so successful in Grenada it now calls itself the Nutmeg Island, designing its flag in the green, yellow and red colours of nutmeg and including a graphic image of nutmeg in one corner.
Spice Description
The nutmeg seed is encased in a mottled yellow, edible fruit, the approximate size and shape of a small peach. The fruit splits in half to reveal a net-like, bright red covering over the seed. This is the aril which is collected, dried and sold as mace. Under the aril is a dark shiny nut-like pit, and inside that is the oval shaped seed which is the nutmeg. Nutmegs are usually sold without the mace or hard shell. They are oval, about 25 mm (1 in) in length, lightly wrinkled and dark brown on the outside, lighter brown on the inside. Nutmeg is sold whole or ground, and is labeled as ‘East Indian’ or ‘West Indian’ indicating its source. Whole nutmeg may be coated with lime to protect against insects and fungus, though this practice is giving way to other forms of fumigation.
Bouquet:sweet, aromatic and nutty
Flavour : Nutty , warm and slightly sweet
Hotness Scale: 1
10487 Automjatic Opp Hot Melt Glue Labeling Machine Suppliers
Short on time? Let Automjatic Opp Hot Melt Glue Labeling Machine sellers contact you.
Hot eye Onion Peeling Machine
Automaitc onion peeling machine with onion root cutting in-one-machine
1 The whole process of onion from feeding, peeling, peeling, root cutting, output and other processes is automated and unmanned, which can save a lot of labor costs.
2 Peel by layers, either more or less. The equipment is designed with a cortex controller, which can be peeled as required. Only one layer of skin can be peeled, or two or three layers of skin can be removed.
3 The peeling is clean and effective. The peeled scallions are clean and good in appearance.
4 The root cutting part is equipped with an onion size recognition mechanism, and the size of the cutting amount can be adjusted randomly to avoid the disadvantage of cutting large onions into small ones and small ones into large ones.
5 Small size, high yield. The equipment design strives to reduce the volume on the premise of increasing the output, so as to apply to various application scenarios such as large, medium and small enterprises and small family workshops.
Dry-type onion peeling machine ,equpit the air compressor ,photo onion peeling machine capacity 50kg-2500kg/hour .
also have other different capacity onion peeling machine according to clients inquired.Onion diameter 30-120mm different model different capacity .
(also have garlic peeling machine for clients )
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
Hot selling tortilla making machine thin pancake making machine
Hot selling tortilla making machine ,1-row, 2-row ,3-row,4-row ,max 50mm diameter,we offer formula for clients,easy working,low cost high profit! tortilla with meat vegetable sauce together are very delicious for people eating !tortilla making machine also can produce Roti, Tortilla, Chapati, Pita
welcome order !
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity
Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process.
Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products.
Parameters
1.process arrange diameter of round shape onion 30-150mm.
2.capacity 1000-1500kg/h
3.Power 3kw
4.Voltage 380V
5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw
6.Machine size 1.5*1.3*1.4m
7.Weight 420kg
Start working flowing:
1.Fill onion in the loading box
2.Start the pneumatic valve switch
3.Start the power-supply switch
4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin
5.When finished adjusting ,The equipment operates normally and automatically.
Hot melt glue, also known as hot melt adhesive (HMA), is a thermoplastic adhesive that is widely used for various applications due to its strong bonding capabilities and quick setting time.
Please contact for prices.
adhesive water based is a process of pressing two or more materials together to create a new material. This is done to create a material that addresses specific application requirements. Laminating adhesives are used to manufacture toilet paper with new functions by bonding different tissue together, we have all kind of water-based glue such as for cardboard, cellophane glue, wood and etc...
Our Hotmelt Adhesive stands out with superior strength, ensuring durable bonds for lasting
performance. Its unique formulation enables rapid melting, saving valuable time in application.
Experience exceptional mileage as Turbomelt optimizes efficiency with its advanced and efficient
composition.
Book Binding Adhesive
- Turbomelt range of pigmented and non pigmented spine adhesives
- Turbocool range of low temperature & non pigmented spine adhesives
- Turbomelt range of flexible hotmelt for better layflat and spine rounding
Whitrin-TS 95100 â?? Clean Label Starch is a native tapioca-based functional starch designed to meet clean label requirements, offering excellent thickening, stability, and texture without chemical modification. It is ideal for manufacturers seeking a natural, consumer-friendly ingredient for use in soups, sauces, baby foods, dairy products, and ready meals. Whitrin-TS 95100 provides smooth viscosity, high clarity, and neutral taste, making it suitable for both hot and cold processing. It is non-GMO, gluten-free, and free from additives, aligning with global clean-label trends.
WHITRIN-F-MS HV1060 is a maize based functionally modified clean label Starch. It is Vegan, Plant-based and Allergen free starch which is used as an Emulsifier, Binder and Texture improviser. WHITRIN-F-MS HV1060 has low and uniform viscosity, which does not change much with temperature during cooking. It is also used in Confectionary products, Jellies, Candies, soft sweets, colloid jelly, starch jelly, toffee/milk candy, inflatable marshmallow, nougat, etc.,
APPLICATIONS
IN CONFECTIONARIES:WHITRIN-F-MS HV1060 is a functionally modified clean label starch. It provides low viscosity during cooking. This low hot paste allows high-solids confectionery products to be easily deposited. The transparency nature of WHITRIN-F-MS HV1060 will increase the glossiness of the product. The coating of WHITRIN-F-MS HV1060 in food products provides protection, prevents crystallization of sugars reduces oil and fat migrations.
WHITRIN-F-MS HV1060 products can be cooked with sweeteners and water to low moisture content without becoming too viscous.
Price: USD 0.62 - 0.80 per unit
Brand Name: TORO
Place of Origin: Thailand
Minimum Order Quantity (MOQ): 10,000 units
Packaging: Individually sealed packs / Custom OEM packaging available
Shelf Life: 12 months
Certifications: HACCP, ISO, HALAL
Product Description:
Toro Popcorn is a premium ready-to-eat flavored popcorn snack manufactured in Thailand, designed for global wholesale markets. Crafted with non-GMO corn and top-grade ingredients, Toro delivers a consistently crispy texture and bold flavor. Ideal for importers, retailers, and private label snack brands, Toro is your go-to solution for high-quality popcorn with OEM support.
Flavor Options:
1. Original - Lightly salted, buttery popcorn
2. Almond Caramel Sweet caramel coating with roasted almond crunch
3. Super Caramel Rich, extra-glazed caramel for an indulgent experience
4. Cheesy Caramel A bold mix of savory cheese and sweet caramel
Key Features:
Wholesale popcorn supplier from Thailand
Certified HACCP & ISO production standards
Long shelf life: 12 months
OEM / Private Label available - custom branding support
Non-GMO corn, no artificial preservatives
Attractive packaging designed for retail impact
Best Suited For:
Snack distributors & food importers
Supermarkets, convenience stores, & cinema chains
Airlines, hotels, and vending machine suppliers
Businesses looking to launch or expand private label snack brands
Contact Us:
Looking for a reliable caramel popcorn manufacturer or need OEM packaging solutions?
Message KHUMSUB now for tiered wholesale pricing, and partnership opportunities.
Keywords : Popcorn, Popcorn Wholesaler, Popcorn Manufacturer
MOQ : 10,000 Pcs
Place Of Origin : Thailand
Brand Name : Toro
ANGEL CLEATION 3300 (V8) is a Tapioca based Functional Clean Label Starch. ANGEL CLEATION 3300 (V8) is Gluten free, Vegan, and Plant-Based starch. ANGEL CLEATION 3300 (V8) is recommended for Higher Temperature and Shear Food Processing. It can be used in various applications such as Dairy puddings, Custards, yoghurts, Desserts and Bakery jams as a Thickener, Binder and Stabilizer.
FEATURES AND BENEFITS1. ANGEL CLEATION 3300 (V8) has an outstanding Process Tolerance and the Textural properties closely resemble modified starches, only minor adjustments in formulation are necessary to replace modified tapioca starches in food products.2. ANGEL CLEATION 3300 (V8) imparts a Short Smooth Texture and sets to a Tender Gel upon cooling. As a Tapioca based product, ANGEL CLEATION 3300 (V8) features a Lower Hot Viscosity which can be an advantage when using processing equipment such as Plate Heat Exchangers.3. It has a Bland taste and so will not mask Flavors or Aromas. It gives a unique mouth feel to the products it is added to. Products formulated with ANGEL CLEATION 3300 (V8) have brighter flavors than the same products formulated with some modified starches.4. It is highly bio-degradable and causes no harm to the Environment.5. ANGEL CLEATION 3300 (V8) is a White powder that adds no Color to application and blends well with other ingredients.6. ANGEL CLEATION 3300 (V8) contains no Fat, Protein, Fiber, Vitamins, or other Minerals.
APPLICATIONS
In Custards, Dairy Puddings, Yoghurts, and Desserts:ANGEL CLEATION 3300 (V8) is widely used in UHT Dairy applications due to its Compatibility with milk proteins, excellent Flavour release and outstanding Process Tolerance. It imparts a Rich creamy mouth feel, a smooth Short Texture and Low Hot Viscosity which are desirable characteristics of Dairy products. It can also be used as a Thickener and Stabilizing agent. At high concentrations, ANGEL CLEATION 3300 (V8) will set to a stable tender gel upon cooling. ANGEL CLEATION 3300 (V8) may be used in conjunction with other gelling hydrocolloids to produce a further range of unique textures. It will form smooth short textured pastes at levels of 3 to 5%.
Bakery Jams:ANGEL CLEATION 3300 (V8) can be used in Bakery fillings to give excellent Bake stability and good Flavour release. In such applications, usage levels are typically 5 to 6% which will provide a Thermo Reversible gel. ANGEL CLEATION 3300 (V8) can be used as an economical replacer for pectin.
Product Overview:
Bento Squid Snack is Thailand's favorite seafood snack, known for its bold flavors, chewy squid texture, and fiery spice that delivers a punch in every bite. Made from real squid and seasoned with authentic Thai spices, these ready-to-eat snacks are perfect for spicy food lovers, convenience stores, vending distributors, and snack importers worldwide.
Available Flavors:
1. Hot and Spicy
2. Sweet and Spicy
3. Spicy Larb (Thai Salad Flavor)
4. Chili Paste
5. Roasted Chili Squid
6. Angry Spicy (Extreme Heat)
Key Features:
Authentic Thai Squid Snack with Intense Spicy Kick
Chewy, Flavor-Packed Texture Loved by All Ages
Wide Variety of Flavors to Suit Regional Tastes
Convenient Ready-to-Eat Packaging
Year-Round Availability for Continuous Supply
Popular in Supermarkets, Gas Stations, and Snack Bars
Product Specifications:
Shelf Life: 6 Months
Origin: Thailand
Unit Weight: Typically 20g - 30g (can be customized upon request)
Packaging & Delivery:
Pricing Terms: FOB Thailand
Price Range: USD 0.16 - 0.26 per unit (based on order volume and packaging type)
Minimum Order Quantity (MOQ): 10,000 units
Packaging Options: Individual retail pouches | Bulk cartons | Customizable packaging available
Why Choose Bento Squid Snacks?
Market-Proven Product with Strong Consumer Demand
Variety of Bold Thai Flavors to Fit Diverse Market Preferences
Attractive Margins for Retail and Wholesale Buyers
Reliable Year-Round Production and Export Capability
Custom Packaging Solutions for Private Label and OEM Orders
Contact Us Today for Pricing & Samples
Partner with KHUMSUB - a trusted exporter of Thai snack foods. Reach out now for detailed quotes, product catalogs, and free samples to explore how Bento Squid Snack can spice up your product lineup!"
Keywords : Seafood, Seafood Snacks, Squid Snacks
MOQ : 10,000 pcs
Place Of Origin : Thailand
Brand Name : Bento
Wooden spoons don't quickly heat to scalding temperatures, chemically react with acidic foods, or scratch pots and bowls, as their metal counterparts do. They don't melt or leach chemicals or strange tastes into hot foods as plastic does. A wooden spoon can be used to stir any dish in any type of vessel
10487 Automjatic Opp Hot Melt Glue Labeling Machine Suppliers
Short on time? Let Automjatic Opp Hot Melt Glue Labeling Machine sellers contact you.
