The leading industrial solid-state laser manufacturer
355nm UV laser cold processing FPC flexible circuit board can avoid stress, burrs and dust.
FPC flexible circuit boards need to use ultraviolet laser drilling, cutting, and scribing technology.
Ultraviolet laser can prevent FPC flexible circuit board from breaking when drilling and cutting
Our common mobile phones, TVs, computers, kitchen induction cookers, rice cookers, range hoods, chargers, remote controls and other electronic devices all need FPC flexible circuit boards.
When designing the corners of the FPC soft board, if the design is not right, the FPC flexible circuit board is prone to breakage. For the mobile phone field, it requires narrower and thinner, in order to avoid the case of scratching and breaking with the shell in the FPC through hole of the mobile phone B/C part, it is necessary to use ultraviolet laser cutting and scribing technology.
Ultraviolet laser is a cold light source with low thermal influence, and the focused spot can be as small as 15um. There will be no deformation or scorching of the FPC circuit board due to the high energy of the laser beam. It is very suitable for FPC flexible circuit boards during Micro-hole drilling processing.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
6225 355Nm Uv Laser Cold Processing Fpc Suppliers
Short on time? Let 355Nm Uv Laser Cold Processing Fpc sellers contact you.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
CWS-WTS is a cold water soluble, pregelatinized starch made from wheat, specially processed for instant thickening and binding without the need for cooking. It hydrates quickly in cold water, delivering a smooth texture, consistent viscosity, and good stability. Ideal for instant food products, soups, sauces, bakery fillings, and snack seasonings, CWS-WTS is valued for its neutral taste, excellent mouthfeel, and performance in both food and industrial applications.
Angel Milk Protein Powder (MPC 50%) is a High Protein Milk Powder, prepared from fresh Skimmed Milk using cold filtration process. It also gives the emulsifier property. Reduces the whey separation and maintains a consistent texture. Temperature stability of the product increases and helps to make the curd and Greek yogurt protein rich.
Whitrin-FW-P2 is a modified tapioca starch specially developed for use in frozen and refrigerated food applications. It offers excellent freeze-thaw stability, smooth texture, and consistent viscosity over time. Ideal for frozen desserts, sauces, ready-to-eat meals, and other processed foods, Whitrin-FW-P2 helps maintain product quality, prevents syneresis (water separation), and ensures a clean, glossy finish. It is suitable for both hot and cold processing and supports extended shelf life in chilled and frozen conditions.
Angel Milk Protein Powder (MPC 78%) is Native Milk Protein in soluble form, having the non-denatured Micellar Casein, prepared from fresh Skimmed Milk using cold filtration process. It is also used as an Emulsifier or Stabilizer in liquid Nutrition formulas and Dairy Products. It also gives excellent mouth feel and taste making it the ultimate choice for fortifying any Food Products.
STABIFLO-TS-UHV800 is a Tapioca based Hydroxypropyl Distarch Phosphate (E-1442). It is Vegan, Gluten-Free and Plant-based. STABIFLO-TS-UHV800 have a high process tolerance, excellent freeze-thaw stability, thickening properties, higher water holding capacity and emulsification properties. It is a highly versatile starch and recommended for use in alkaline conditions, high pH foods and also in foods containing acid. STABIFLO-TS-UHV800 has excellent cold temperature stability and provides a smooth, creamy texture. It is widely used in Fruit fillings, Glazes, Dairy products, Yoghurt, Cream products, Mayonnaise, Ice creams, Canned products, aseptically processed foods, cream-based sauces, puddings, Frozen foods, Custards, pie fillings, gravies, Processed meat products, sausage, meat balls, etc.,
Whitrin-TS 95100 â?? Clean Label Starch is a native tapioca-based functional starch designed to meet clean label requirements, offering excellent thickening, stability, and texture without chemical modification. It is ideal for manufacturers seeking a natural, consumer-friendly ingredient for use in soups, sauces, baby foods, dairy products, and ready meals. Whitrin-TS 95100 provides smooth viscosity, high clarity, and neutral taste, making it suitable for both hot and cold processing. It is non-GMO, gluten-free, and free from additives, aligning with global clean-label trends.
STABIFLO-WM-UHV800T is a Waxy Maize based Hydroxypropyl Distarch Phosphate (E-1442). It is Vegan, Gluten-Free and Plant-based. STABIFLO-WM-UHV800T have a high process tolerance, excellent freeze-thaw stability, thickening properties, higher water holding capacity and emulsification properties. It is a highly versatile starch and recommended for use in alkaline conditions, high pH foods and also in foods containing acid. STABIFLO-WM-UHV800T has excellent cold temperature stability and provides a smooth, creamy texture. It is widely used in Fruit fillings, Glazes, Dairy products, Yoghurt, Cream products, Mayonnaise, Ice creams, Canned products, aseptically processed foods, cream-based sauces, puddings, Frozen foods, Custards, pie fillings, gravies, Processedmeat products, sausage, meat balls, etc.,
ECO-FRIENDLY COCONUT SHELL BOW
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep in a cool dry place before storing in the refrigerator.
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for a long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven, or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep it in a cool dry place before storing it in the refrigerator.
Origin: Vietnam
Uses: Hot or Cold tea
Color: Natural Dark Red
Shelf-life: 02 years.
MOQ: 100Kgs
Packing: PP bag or as requirement.
Drying process: air-dried
Admixture: 1.5% max
Moisture: 10% max.
Grass Jelly is a material with many uses. From stem powder and dried leaves are used to cook jelly as a refreshing drink. in addition, starling stem powder is used as processed food. In some countries such as Taiwan and Indonesia, it is thought that the starling tree leaf powder has a diuretic effect or cures a number of diseases such as the common cold, high blood pressure, muscle aches and joints, diabetes, Acute hepatitis. Grass Jelly is also used to process industrial food.
Black Grass Jelly is a material with many uses. From stem powder and dried leaves are used to cook jelly jelly as a refreshing drink. in addition, starling stem powder is used as a processed food. In some countries such as Taiwan and Indonesia, it is thought that the starling tree leaf powder has diuretic effect or cures a number of diseases such as the common cold, high blood pressure, muscle aches and joints, diabetes, Acute hepatitis. Grass Jelly is also used to process industrial food.
Black Grass Jelly is a material with many uses. From stem powder and dried leaves are used to cook jelly jelly as a refreshing drink. in addition, starling stem powder is used as a processed food. In some countries such as Taiwan and Indonesia, it is thought that the starling tree leaf powder has diuretic effect or cures a number of diseases such as the common cold, high blood pressure, muscle aches and joints, diabetes, Acute hepatitis. Grass Jelly is also used to process industrial food.
Black Grass Jelly is a material with many uses. From stem powder and dried leaves are used to cook jelly jelly as a refreshing drink. in addition, starling stem powder is used as a processed food. In some countries such as Taiwan and Indonesia, it is thought that the starling tree leaf powder has diuretic effect or cures a number of diseases such as the common cold, high blood pressure, muscle aches and joints, diabetes, Acute hepatitis. Grass Jelly is also used to process industrial food.
6225 355Nm Uv Laser Cold Processing Fpc Suppliers
Short on time? Let 355Nm Uv Laser Cold Processing Fpc sellers contact you.
