The grinding efficiency of the mill is high, the collision times of grinding medium is 50 times that of ordinary ball mill, and the grinding speed is 10 ~ 30 times higher than that of ordinary ball mill. It has good sealing performance, no dust overflow, low energy consumption, simple installation and convenient maintenance. It adopts rubber lining plate and non-metallic medium to basically realize iron free wear. It can grind inflammable and explosive materials intermittently, and can be filled with nitrogen for protection
brief introduction
Rotary vibration mill is a newly developed ultra-fine powder crushing machine with a wide range of crushing. It is suitable for chemical industry, dyes, rubber products, bakelite, ceramics, pesticides, medicine, building materials, cosmetics and other industries. It is suitable for intermittent, continuous, dry and wet grinding operations.
The grinding efficiency of the mill is high, the collision times of grinding medium is 50 times that of ordinary ball mill, and the grinding speed is 10 ~ 30 times higher than that of ordinary ball mill. It has good sealing performance, no dust overflow, low energy consumption, simple installation and convenient maintenance. It adopts rubber lining plate and non-metallic medium to basically realize iron free wear. It can grind inflammable and explosive materials intermittently, and can be filled with nitrogen for protection.
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
40896 Rotary Vibration Mill Suppliers
Short on time? Let Rotary Vibration Mill sellers contact you.
Vertical flour mill use for home use or small business at home. Our 18 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 16 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 14 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 12 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 10 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Food rotary mixing machine
Food processing: Automatic lifting material --automatic rotary mixing
Seasoning and mixing: sauce (chili sauce, jam), pickled vegetables (radish strips, salted fish), meat (braised beef, chicken legs) coating powder, seasoning 13.
Granules and powder: snack mixes such as crisps, potato chips, shrimp chips, and raw materials of cereals and Babao Congee.
Special requirement: Non damaging stirring for fragile ingredients such as bean curd and cereal.
Expanding industries:
Compatible with dry powder or granule mixing in industries such as pharmaceuticals, feed, and chemicals, but attention should be paid to equipment materials and cleanliness
Capacity 50-100kg ,big capacity need customized .
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
40896 Rotary Vibration Mill Suppliers
Short on time? Let Rotary Vibration Mill sellers contact you.