This manual will assist you in installing, using and maintaining your flow meter. It is your responsibility to make sure that all
operators have access to adequate instructions about safe operating and maintenance procedure.
Operating Principle:
Gas flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.
Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact
Make sure the turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine. Refer to the nameplate for your customized products specification.
Used complete gas turbine plants / heat recovery steam generator from 40-150 Mw, Siemens, GE, Pratt & Whitney , Alstom etc.
No one year warranty on used equipment
Price only valid for GE 6000, not for the other manufacturers. Price depends on size and manufacturer.
Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.
Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
Turbine Flow Meters which have advantages of simple structure, light weight, high accuracy and easy installation, measure liquid which has no impurities and no chemical corrosive reaction with stainless steel . The measurable liquids include water , diesel and methanol, etc.
FINE-FLOW FLOW METERS BY H&L FROM KOREA
FEATURES
Wide range of liquid measurement
High accuracy and excellent repeatability
Easy installation and energy saving
Easy to read LCD Back light.
Specific Gravity Correction 0.01 2.00
Display Accumulated amount reset, accumulated flow display, instantaneous
flow rate display, gallon or liter unit change, automatic integration
Lamp indication
Flow display
Battery life 4 5 years
Auto on and off
An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound to calculate volume flow. Using ultrasonic transducers, the flow meter can measure the average velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured transit time between the pulses of ultrasound propagating into and against the direction of the flow or by measuring the frequency shift from the Doppler effect. Ultrasonic flow meters are affected by the acoustic pr
6369 Gas Turbine Flow Meter Zero100Tb Suppliers
Short on time? Let Gas Turbine Flow Meter Zero100Tb sellers contact you.
Size:DN6
Flow range:0.1-0.6m3/h
Without display, 2 wire
Output:4-20mA
Connection:screw
Body material:SS304
Power supply:24V
Accuracy1%
Temperature:-20-+120C
Residential Diaphragm Gas Meter
ITRON (MID approved)
Steel Version
Basic Features
3 Compact size: 1.2 dm cyclic volume
Range: G1.6, G2.5, G4
EN 1359 & O.I.M.L compliance
Design
Long -term accuracy & safety
Ready for remote reading & data management
Quality
World-class, ISO9001 certified, European Engineering and
Manufacturing
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
Cinnamon Bark Extract - 5% to 20% Polyphenols by UV
The oils found in cinnamon bark are thought to reduce spasms, reduce gas (flatulence), and stimulate the appetite. Cinnamon might also increase blood flow. Cinnamon bark also contains a chemical that might work like insulin to lower blood sugar.
The purpose of this document is to provide instructions for the use of TC200A an oilsoluble ultrahigh alkali
magnesium additive specifically designed to inhibit vanadium in ashforming crude and residual fuels for gas
turbines
TC200A additive is a turbinequality oilsoluble organomagnesium fuel additive prepared by reacting high
purity magnesium compounds with carboxylic acid It possesses excellent physical and chemical properties and
is proprietary in its formulation The additive can be easily dissolved in heavy fuel oil in any proportion
The primary function of TC200A additive is to supply available MgO which reacts with V2O5 present in heavy
fuel oil forming a highmeltingpoint vanadium magnesium compound through chemical combination This
compound effectively inhibits vanadium corrosion and results in the formation of dispersed ash that is carried
away with the turbine exhaust gas
The recommended dosage of TC200A additive in heavy fuel oil is around 3 to 35 MgV3 to 35 or as per the
instructions provided by the gas turbine manufacturer When calculating the additive dosage the nickel content
in the heavy fuel oil must be considered along with vanadium
TC200A additive is manufactured in strict accordance with GE standard GEK28150B It exhibits stability to
hydrolysis is oilsoluble nonvolatile and harmless The additive is suitable for use in heavyduty gas turbines
employed in industrial marine and utility applications
Additive Type Oil Soluble and oil spersed
Magnesium content 20
Physical appearance Brown or black viscous liquid
Density 120125gml 20
Viscosity 60mm2s 40
Flash Point 65
Pour Point 20
NaK 50mgKg
Ca 500mgKg
Pb 5mgKg
V 5mgKg
FUJI developed the first infrared gas analyzer in Japan to use mass-flow sensors. Since then, we have supplied customers with various types of gas analyzers to support environmental preservation and control efforts. These efforts include measurements of atmospheric pollution and detection of low density of SOx and NOx, generated by incinerating facilities and boilers. FUJI's gas analyzers are widely used to monitor the atmosphere to help maintain a cleaner natural environment.
Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
Drying Type Garlic Peeling Machine
Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine
The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry .
The remarkable features of the machine are as follows
1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root.
2. Automatically split the garlic and peel it.
3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic.
4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment.
5. The machine is clean and undamaged.
6. The machine also has the characteristics of low power consumption and no noise.
Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!
JC040 Vortex Natural Gas Flow Meter
JC-040 series smart precession whirlpool flowmeter uses new microprocessing techn ology with strong function, wide flow range, simple maintenance and co nvenient installation & use. It is widely used in industries such as petrol, chemical, power, metallurgy and coal, etc.
BCST Natural Gas Flow Meter FeatureÃ?Â
1.� Built-in pressure, temperature and flow sensors with high safety, compact structure and exquisite shape.
2.� Local indication of temperature, pressure, instantaneous flow and accumulative flow.
3.� Use new signal processing amplifier and unique filtration technology, effectively eliminate interfering signal generated by pressure fluctuation and pipeline vibration, greatly improve anti-interference ability of flowmeter, and make good stability of little flow.
4.� Special time indication and real-time data storage function; under no circumstance will the internal data be missing and will be stored forever.
5.� Password protection
6.� Low power consumption, internal battery supply, no need for external power supply.
If you want to know more about this product, you can click the link below
1. Specification, basic data and performance
MF5600 Series Detachable Display Gas Flow Meters General description
MF5600 series mass flow meters are specially designed for applications where the display isoften required to be placed separated away from the flow channel or meter body, such as theoxygen metering system in a hospital. These meters are opted with the standard industrialuser interfaces (RS485 and 4 ~ 20mA), and user defined alarm functions for better monitoringor control over the network. The off-the-shelf products (MF5612 and MF5619) are for gasflow measurement of 0 ~ 300 SLPM and 0 ~ 800 SLPM, respectively.
MF5600 Series Detachable Display Gas Flow Meters Features and Applications
- Detachable display that can be placed away from the flow channel via a specially designed cable
- Standard 4 ~ 20 mA or RS485 for remote data communication
- Hygienic stainless steel body ready for oxygen metering
- Extended rangeability for accurate flow monitoring and control
- Intrinsic safe enclosure
Product Introduction
The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions.
Ã?Â
Product Features
1. Extra-wide flow range 1:300
2. Repeatability better than 0.1%
3. Intelligent correction (Volume and flow rate automatic correction)
4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output)
5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication)
6. Intelligent wire control start and stop
7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy
8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal)
Ã?Â
Precision (Repeatability)
Standard Flow Range: �± 0.1% (Standard deviation)
Entire Flow Range: �± 0.15% (Standard deviation)
Ã?Â
Material (Anti-corrosion)
304 stainless steel
316 stainless steel (customized)
Temperature measurement: 0-50
Pressure measurement: 0-10kPa
Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.
Product origin - Russia - USA
Key Specifications/Special Features - Jet A-1 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene.
Minimum Order Size and Packaging details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month.
Larger monthly quantities are not normal, but can possibly be accommodated.
Product Description - Colonial Grade JP-54 considered as the #1 low sulphur jet fuel
Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.
Product origin - USA - Russia - Korea
Key Specifications/Special Features - JP-54 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene.
Minimum Order Size and PackaGing details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month.
Larger monthly quantities are not normal, but can possibly be accommodated.
SORRY, NO SPOT CONTRACTS ACCEPTED "
6369 Gas Turbine Flow Meter Zero100Tb Suppliers
Short on time? Let Gas Turbine Flow Meter Zero100Tb sellers contact you.
