FDH-2111 Aniline point tester of petroleum products
Scope
Applicable standards: ISO 2977, GB / T262, ASTM D611, IP2
This instrument applies to the determination of petroleum products aniline point test method is specified aniline and sample volume placed in a test tube, and mechanical stirring to mix. The mixture is heated at a controlled rate until completely mixed the two phases. The mixture was then cooled at a controlled rate, when the two-phase separation, the temperature is recorded aniline point.
Features
1, the photodetector separated state accurate;
2, high-power solid-state regulator control heating rate;
3, the voltage is raised status display;
4, integrated structure, easy to operate;
5, standard glass test tubes, meet the standard requirements;
Technical Parameters
1, heating: electric heating tube
2, the mixing method: flexible shaft stirring
3, detection method: photoelectric detection
4, measurement range: room temperature ~ 150
5, power supply: AC220V 50HZ
6, temperature adjustment: a solid state voltage regulator
7, standards: ASTM D611, IP2, ISO2977, GB/T262
FDH-2171 Automatic aniline point tester of petroleum products
Scope
Applicable standards: ISO 2977, GB / T262, ASTM D611, IP2
The aniline point is used to characterize the pure hydrocarbon and is used to show the aromatics content of the hydrocarbon mixture. Take the same amount of aniline with the sample or sample plus n-heptane and heat and stir at the controlled rate. After the two phases are homogeneous, the mixture is cooled at the control rate, and the temperature of the two-phase re-separation is an aniline point or a mixed aniline point of the sample.
Features
1, LCD display, keyboard input, equipment testing process more intuitive
2, the high degree of automation equipment, automatic detection, automatic save results
3, the use of photoelectric detection method, the results of high precision
4, the use of integrated equipment, easy operation and maintenance
Technical Parameters
1. Applicable standards: in line with GB / T262
2, the test temperature: room temperature ~ 170
3. Detection: Auto photo detector
4, cooling rate: 1 / min ~ 2 / min
5 Power supply: AC220V 50HZ
6, Weight: 3KG
Features
1, the photodetector separated state accurate;
2, high-power solid-state regulator control heating rate;
3, the voltage is raised status display;
4, integrated structure, easy to operate;
5, standard glass test tubes, meet the standard requirements;
Product Code : OM-0112ZO
Size/Dimensions : 40 W X 40 H X 20 G cm
Colour : Natural
Material : Jute
Handle/Strap : Cotton Tape Handle
MOQ : 1000 Pcs.
Description:
We are manufacturer of jute promotional bags with your own brand. This bag is best for any event. For promotional bags we should care about three points. 1. How useful 2. Cost 3. Eco friendly or not With these 3 parameters jute promotional bag is the best choice for the companies who are very conscious about the environment.
We are manufacturer of jute promotional bags with your own brand. This bag is best for any event. For promotional bags we should care about three points. 1. How useful 2. Cost 3. Eco friendly or not With these 3 parameters jute promotional bag is the best choice for the companies who are very conscious about the environment.
Scope
Standard ASTM D93, GB / T261-83 and ISO2719-1988 international standards.
Features
1, large-screen LCD, friendly user interface
2, also has a fault of Jane function, automatic fault prompts
3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results
4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition
5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable
6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance.
7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency.
8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance.
9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage
Technical Parameters
1. Environment: Temperature 0 ~ 60 ? Relative humidity: = 80%
2, Display: large-screen LCD
3, heating rate: less than 50 ? 1 ? / min, higher than 50 ? 2-3 ? / min
4, temperature range: -30 ~ + 80 ?, accuracy ± 1 ?
5, the temperature measurement element: PT100 stainless steel temperature sensor
6, the ignition: gas flame ignition
7, Detection: Automatically detects a flash fire and automatically print test data.
8. Communication: USB / 232 communication interface.
9, cooling system: compressor cooling
10, print: You can print the results of this experiment or any print storage
11, using the power AC220V 50Hz, the total power: 1.5 kw
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.
Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic
We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
1) Aniline, phenylamine or aminobenzene is an organic compound with the formula C6H7N. Aniline is the simplest and one of the most important aromatic amines, being used as a precursor to more complex chemicals.
2) Being a precursor to many industrial chemicals, its main use is in the manufacture of precursors to polyurethane. The largest application of aniline is for the preparation ofmethylene diphenyl diisocyanate (MDI).
3) Other uses include rubber processing chemicals (9%), herbicides (2%), and dyes and pigments (2%).As additives to rubber, aniline derivatives such as phenylenediamine[disambiguation needed] and diphenylamine, are antioxidants. Illustrative of the drugs prepared from aniline is paracetamol (acetaminophen, Tylenol). The principal use of aniline in the dye industry is as a precursor to indigo, the blue of blue jeans.
4)Aniline is also used at a smaller scale in the production of the intrinsically conducting polymerpolyaniline.
Scope of application
For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F).
Benefits
- Conforms to ASTM D92 and related specifications
- For flash points above 79 C (175F)
Function characteristics
1,english operating software prompts;
2, with the experimental date, test time parameter prompts;
3, automatic correction of atmospheric pressure and calculated correction values;
4 differential detection, automatic correction system deviation;
5, scan, ignition, detection, print test data computer is done automatically;
6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel;
Chemical Properties
Boiling point 40 C
density 0.967 g/mL at 25 C(lit.)
vapor pressure 23 hPa (195 C)
refractive index 1.439
Fp 82 F
storage temp. Flammables area
solubility Miscible with alcohol, isopropyl alcohol and toluene.
form Oily Liquid
Specific Gravity 0.9671
color Light yellow
Item Specifications
Appearance Colorless transparent or light yellow liquid
Purity % 99.99
Aluminum content % 10.2-12.5
Density ( g/cm3) 0.92-0.97
We can supply Acetic Acid Industrial Grade and Food Grade.
Commodity:Acetic acid.
Other name: Glacial acetic acid
Molecular formula CH3COOH
CAS:64-19-7
EC No.200-580-7
Introduction:
Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition.
the most important characteristic of this way are as following:
mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way.
Specifications:
Apha color:<10
Freezing point: 16
Specific gravity:1.04
Acetid acid: 99.8%
Acetaldehyde: 0.004%
Formic acid: 0.06%
Iron: 0.00004%
Non-Volatile Matter: 0.003%
The heavy metal(As Pb counts): 0.00002%
Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%
Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.
Package:
25kg carton drum or 1kg foil bag or by request of clients
Tomato fruit nutrient-rich, with a special flavor. Can be raw food, cooking, processed into tomato sauce, juice or whole fruit cans.
The edible parts of tomato are juicy berries. It is a lot of varieties, according to the shape of the fruit can be divided into round, oblong, oblong, pointed round; according to the color of the peel, there are red, pink, orange and yellow The
Red tomatoes, fruit color red, generally slightly flat spherical, navel small, flesh, taste sand sweet, juicy and more refreshing, good flavor, raw food, cooked food can also be processed into tomato sauce, tomato juice; pink tomato, fruit powder Red, nearly round spherical, navel small, fruit surface smooth, taste sweet and sour moderate, better quality, yellow tomatoes, fruit orange fruit large, spherical, flesh thick, fleshy and surface and sand, raw food is light, should be cooked food.
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
24293 Aniline Point Tester Suppliers
Short on time? Let Aniline Point Tester sellers contact you.
