Find Verified Hsg Center Section 2T %288813187%29 Suppliers, Manufacturers and Wholesalers

Connection Boxes in insulating material in a good design shape. protection degree complying with IEC 529 IP 44 & 54 & 67 Grey Ral 7035 High impact material : I

K8 mechanical protection degree according to CEI EN 5010 standard flame and fi
re resistance according to IEC 695-2- Halogen free. Total insulation features (CEL 64-8, EN 60439-1CEL 17-13/1) (IEC 60309-1) Temperature rating :- 25c to + 80c screw close cover Screw close cover Glow-wire test:IEC 598-1,Section (13,13.3.2) cable gland pg :16 & 29 Sizes in mm

Introduction:Steam eye mask is designed based on heat control technology.It gets its name because it can generate heat and steam spontaneously.
Product Details
Introduction:Steam eye mask is designed based on heat control technology.It gets its name because it can generate heat and steam spontaneously.

Main features
Laminar flow design, users can hardly see lukewarm steam, And It can be used anytime and anywhere.
Relieve fatigue
Portable design

Advantages
1.Relieve physical burden of eyes effectively.
2.Address eyes problems including dark circle,puffiness,wrinkles.

Specifications
Model: Powder bag steam eye mask and Thin section steam eye mask
Applicablepeople: all the people

Applicable scope
Clinic,hospital,healthcare center,and other medical institutions.

New product launched with focus on Jewellers who organize exhibition for sales or take part in Trade Fair and B2B exhibitions.
All products shown here are in use and are actual pictures of working products.
Back drop like show case as well as display and sales counters are all portable and each set of three tables and one show case would just take not more than one hour and time taken would reduce as you get practice.
Backdrop showcase size is 230 cm height and 295 cm width end to end. In this fascia width is 230 cm and is made of total of 9 squares of 75 x 75 cm each. usually, 3 sections are added in height and width can vary as per requirement. Here what you see is a 3 x 3 section Magnetic Popup.
We have added three sections to the middle of the Magnetic Popup.
One client required more shelves in their pop ups, prompting us to add three shelves on top and three in the middle making 6 shelves in all per Magnetic Popup unit.
Highlight of the system is dividing shelf in each shelf section. We have provided Toughened Glass shelves to prevent sagging problem due to heavy display opted for by Jewellers.
As we went about designing this unique system, another problem faced was as to how to light these shelves up? Usual way is to just add two spot lights to top center of the â??shelf unit, but this would create very odd lighting on heavy jewellery pieces. This made us source around and devise a way to light each shelf unit from left and right side, this finally created even and pleasing illumination of both halves of the shelf. Bright LED Light was provided in warm white or white colour as required by customer.

We offer you a complete interior system for your city bus projects to your expectation which is easily applicable for all kinds of sections. WE manufacture Bus interiors panels, window post, dash board, seat back , roof panels , and door trims. We at Therm O Pack will offer complete solutions to your requirements of ABS Busbody Interior components such as Center roof, side panels, window panels, seat back, luggage rack etc.

These components are Vcauumformed pin different color combinations and sizes suitable to various model buses including luxury ones. We also vacuumform Acrylic covers for lighting fixers used in buses and other automobile vehicles. Moreover we vacuumform specialized auto body parts for tractors, earth moving equipments, Designer car body parts.

The safflower import from South Africa includes a range of high-quality varieties, each known for its oil content and yield potential. Below are some key varieties of safflower exported from South Africa:

1. PBNS-40
Released in 2007 at the MAU, Parbhani releasing center, PBNS-40 has a yield potential of around 1500 kg/ha. It contains approximately 27% oil and is a non-spiny variety. This variety is best suited for cultivation in Madhya Pradesh.

2. AKS-207
Released in 2007 at the PDKV, Akola center, the AKS-207 variety has a yield potential of 1200-1400 kg/ha, with an oil content of 27%. It is recommended for cultivation in Maharashtra.

3. NARI-38
NARI-38 was released in 2007 at the NARI, Phaltan center. This variety has a yield potential of 2038 kg/ha and an oil content of 28%. It is resistant to wilt and recommended for cultivation throughout South Africa.

4. SSF-658
Released in 2009 at MPKV, Solapur, SSF-658 has a yield potential of 1430 kg/ha and contains around 28% oil. This variety is tolerant to wilt and aphids and is suited for cultivation across South Africa.

5. SSF-708
The SSF-708 variety, released in 2012 at MPAU, Solapur, has a yield potential ranging from 1300 to 2200 kg/ha and an oil content of 29%. It is recommended for cultivation in Western Maharashtra and is moderately tolerant to aphids.

6. PKV-Pink (AKS-311)
Released in 2013, PKV-Pink has a higher oil content of around 33% and a yield potential of 2200-2500 kg/ha. This variety is recommended for cultivation in the Vidarbha region of Maharashtra.

7. NARI-57
Released in 2015, NARI-57 is recommended for cultivation in Maharashtra, Madhya Pradesh, Rajasthan, Punjab, Uttar Pradesh, West Bengal, and more. It is suitable for a wide range of growing conditions.

8. NARI-H-23
Released in 2013 at the NARI, Phaltan center, NARI-H-23 is recommended for cultivation in Maharashtra, Karnataka, Chhattisgarh, Rajasthan, and other states. It is suited for irrigated and assured rainfall conditions

Best Of Door P049 is one of the best product of Luxury Home Furniture. With this product your room becomes more beautiful and comfortable. Bring this Best Of Door P049 to your beloved family home, your hotels, appartments, etc!.

This Best Of Door P049 made with a beautiful design with high quality materials that will make your family feel at home for long. This product comes in a variety of colors and sizes

Standard Machine Specification LCC 800 LCC 1000 LCC 1250
CAPACITY:
Centers height mm 410 510 625
Swing over bed mm 890 1090 1320
Max. turning diameter over guideways for lathes with turret head mm 750 750 1000
Swing over cross slide mm 490 690 940
Swing in gap mm 1050 1250 1500
Width of bed mm 700
Distance between centers mm 1500, 3000, 4000, 5000
Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650
MAIN SPINDLE:
Spindle bore mm 155
Spindle nose DIN55027 No. 15
Spindle hole internal taper Metric 160
Front bearing diameter mm 200
HEAD STOCK:
Spindle speed in two ranges rpm 2 - 250; 8 - 1000
Main motor power kW 30
Spindle max. torque Nm 5000
FEEDS:
Longitudinal feeds (Z-axis) M/min 10 (max)
Cross feed (X-axis) M/min 10 (max)
Rapid traverse (Z-axis and X-axis) M/min 10 (max)
Crosslide maximum travel mm 525 525 650
Z-axis feed torque N.m. 26.1
X-axis feed torque N.m. 10
CNC SYSTEM
Options HEIDENHAIN, FANUC, SIEMENS, FAGOR
TOOLHOLDER TURRET HEAD
Tool section mm 40 x 40
Diameter of boring bar mm 40
Turret head position number 8 or 12
TAIL STOCK:
Quill diameter mm 125
Quill internal taper Morse No.6
Quill travel mm 250
Tailstock movement Motorized
NET WEIGHT
DBC 3000 mm Kg 8800 9300 9800

Product Name : Men bracelets
Product Code : PA173M

Product Description :

Silver bracelet man 925/1000, the model is to throttle or slave-girl, I propose in the men's line but it really is a sports model worn by all men and women. The section is oval, shapes itself well to the wrist, while the finishes are in satin silver and rhodium for the little slave, while the center consists of a chain is finished in polished and rhodium plated silver. size: 5 mm wide, 2.0 mm high, 18.00 cm long is modeled on the wrist and is ideal for measuring pulse from 18.0 to 19.50 cm

Product Origin : Italy

Key Specifications & Special Features :

Silver bracelets Man bracelets men enamel and silver bracelets men to throttle, bracelets men's fashion, fashion silver bracelets, bracelets sporty silver, silver and rubber bracelets, antique silver bracelets, silver bracelets semi-rigid, hand-made bracelets men, silver chain bracelets.

Main specifications and features Units Parameter value
With of guide way and rigidity of harden550HRC52
Swing over bedmm800
Swing over cross slidemm480
Distance between centersmm1500 *3000
Swing over saddlemm1000*3000
Spindle bore diametermm105
Taper of spindle bore Metric 120morse5
Range of spindle speedr/min6-800
Stap No. feedKinds72
Longitudinal feeds rangeMM/R0.1-1.52 1.6-24
Cross-to-longitudinal feed rate1.2
Carriage rapid-moving speedm/MIN4
Screw pitch of leadscrewmm12
Metric threads rangemm1-240 50kinds
Inch threads rangeT/inch28-1 27kinds
Module threads rangemm0.5-120 53kinds
Pitch threads ranget/inch28-1 24 kinds
Section of tool shankmm30*30
Swivel anger of tool pos90
Max travel of cross slidemm420
Max travel of top slidemm200
Travel of tailstock quillmm250
Tapper of tailstock quill More 6
Tapper of center More 6
Max cross travel of tailstock mm+20

Product: Women's Strapless Poplin Printed Maxi Dress

Style: Elegant, feminine, floor-length maxi dress with a strapless, fitted bodice.

Color: Ivory/cream with contrasting black floral and botanical prints.

Neckline: Straight, strapless neckline with a clean, minimal finish.

Silhouette: Fitted through the bodice and waist, flowing into a full, flared maxi skirt.

Print Placement: Artistic black botanical motifs are concentrated asymmetrically across the front bodice and along the lower skirt, continuing toward the back.

Fabric Appearance: Lightweight, soft-flowing fabric with a slightly textured/natural finish.

Back: Strapless back with a visible center-back zipper and fitted upper section.

Length: Full length, approximately ankle/floor length.

Overall Look: Sophisticated and resort-inspired, combining a clean ivory base with bold monochrome botanical detailing.

Occasions: Suitable for vacations, resort wear, beachside dinners, brunches, summer parties, date nights, and semi-formal occasions.

Styling: Pair with minimal heels or sandals, delicate jewelry, and a small clutch for an elegant monochrome look.

The 3D OCT Maestro is an advanced ophthalmic imaging system designed for comprehensive retinal examination and diagnosis. Developed by Topcon Healthcare, the device combines Optical Coherence Tomography (OCT) and fundus photography in a single compact unit, enabling fast and accurate eye imaging.

Description

The 3D OCT Maestro is used by eye care professionals to capture high-resolution cross-sectional and color images of the retina, optic nerve, and macula. It helps in the early detection, diagnosis, and monitoring of various eye diseases such as glaucoma, diabetic retinopathy, macular degeneration, and retinal disorders.

The system features fully automated operation with auto-alignment, auto-focus, and auto-capture functions, making the imaging process quick, efficient, and user-friendly. Its advanced OCT technology provides detailed 3D retinal scans that support precise clinical evaluation and treatment planning.

Key Features
High-resolution OCT retinal imaging
Integrated color fundus photography
Fully automated capture system
Fast scanning and accurate diagnostics
User-friendly touchscreen interface
Compact and space-saving design
Comprehensive retinal and optic nerve analysis
Suitable for clinics, hospitals, and eye care centers

A blind and spacer flange is a type of flange used to isolate a section of pipe or equipment. It is made up of two parts: a solid disc called the "spade" and a ring with a hole in the center called the "spacer". The spade is inserted into the spacer and then bolted in place between two flanges. This creates a barrier that prevents fluid flow through the pipe.
Blind and spacer flanges are used in a variety of applications, including:
1. Maintenance and repair
2. Testing and commissioning
3. Decommissioning
4. Temporary isolation

Technical Specifications
1. Material: Steel, stainless steel, or other non-corrosive materials
2. Size �½â?? inch to 24â?? Inch
3. Face finish: Raised face, Flat face, or Grooved face
4. Pressure class: 300, 600, 900, 1500 or 2500 psi

Benefits
Blind and spacer flanges offer a number of benefits, including:
â?¢ They are a cost-effective alternative to isolation valves.
â?¢ They are easy to install and remove.
â?¢ They provide a reliable seal against fluid flow.
â?¢ They are available in a variety of sizes and materials to meet the needs of different applications.


Applications
Blind and spacer flanges are used in a variety of industries, including:
1. Oil and gas
2. Chemical
3. Power
4. Water treatment
5. HVAC

Introducing the Wooden Pen and Mobile Stand by HeartfulCraft, an elegant and practical desk organizer handcrafted by skilled rural artisans from Saharanpur, India's renowned center of woodworking excellence. Crafted from ethically sourced, natural wood using ancient artisan techniques, this multi-slot stand is designed to keep your workspace organized while adding a timeless touch of craftsmanship.

This sustainably produced, cruelty-free, and biodegradable office accessory offers dedicated sections for pens, pencils, and mobile phones, making it an ideal choice for professionals, creatives, and conscious consumers alike. Its smooth, toxin-free natural finish and small-batch production ensure that every piece is unique, eco-friendly, and ethically made.

Crafted with Purpose, Designed for Functionality
This desk organizer is:

Handcrafted by skilled artisans using traditional woodworking techniques

Made from locally sourced, sustainable natural wood

Eco-friendly, biodegradable, and low-impact

Naturally finished, toxin-free, and cruelty-free

Plastic-free packaging for sustainable shipping

Small-batch crafted supporting fair trade and artisan welfare

A cultural preservation product reflecting Indian heritage art

Product Features & Specifications
Material: Premium Natural Wood

Color: Elegant Brown Finish

Usage: Multipurpose Organizer for Pens, Pencils, Mobile Phones, and Accessories

Customization: Available upon request

Packaging: Eco-conscious, plastic-free

Origin: Handcrafted in Saharanpur, India

Endurance Trendy Gym Duffle Bag
Get ready to experience the ultimate fusion of style and functionality with our Endurance gym/travel duffel bag! This trendy, lightweight duffel bag boasts a spacious interior for all your workout or travel necessities, fortified by a sturdy construction. Quick access zipper pockets on the side and front make for an effortless retrieval of essentials, while a separate shoe compartment keeps your footwear isolated and in pristine condition.
The bag also features a detachable, padded shoulder strap that can be adjusted to your comfort. Whether you're headed to the gym, work, or a weekend getaway, the Endurance Duffle Bag has everything you need.
DESIGN INSIDE
* Trendy & Stylish Gym/Travel Duffel Bag
* Premium Twill Fabric Material
* Lightweight with Sturdy Construction
1 Center main compartment with Two-way Zipper
1 Front Large Zipper Compartment
1 Front Quick-Access Zipper Pocket
1 Inside Large Netted Mesh Zipper Section with Key Holder
* 1 Side Zipper Shoe Compartment
* 1 Side Zipper Pocket & 1 Small Side Pocket with Velcro Strap Closure
* THE HOLISTIK Branded Detachable & Adjustable Shoulder Strap, with Shoulder
* Padding for comfort
* Convenient Handles with Wrap Cover for Easy Carrying & Grip
Zip Pullers with Bartack
High-Quality Polyester Bag lining
* Colors: Black
* Product Type: Duffel Bag (Gym/Travel/Short Trips).
* Capacity: 31 Ltr
Size L49 x H24 x W27
* Weight :955gms
Designed in the UK

Made available by us is a wide and commendable range of Weld Neck Flanges (WNRF). All our products comes with welding neck, which is hot formed from a circular section of steel plate having a small co-axial hole in the center due to which these are durable. These products find their wide applications in engineering and construction industries because of rustproof construction, excellent finishing and lightweight.

Specifications:

Stainless Steel: ASTM A 182 and A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H and 904L
Duplex Stainless Steel: UNS S31803 and 2205
Super Duplex Stainless Steel: UNS S32750
Carbon Steel: ASTM A 105 and ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9 and F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22 and C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB to 48" NB
Class: 150, 300, 400, 600, 900, 1500 & 2500

Standards available:

ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36 and ANSI B16.48
DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638 and DIN2673
B.S: BS4504, BS4504, BS1560 and BS10

Made available by us is a wide and commendable range of Weld Neck Flanges (WNRF). All our products comes with welding neck, which is hot formed from a circular section of steel plate having a small co-axial hole in the center due to which these are durable. These products find their wide applications in engineering and construction industries because of rustproof construction, excellent finishing and lightweight.

Specifications:

Stainless Steel: ASTM A 182 and A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H and 904L
Duplex Stainless Steel: UNS S31803 and 2205
Super Duplex Stainless Steel: UNS S32750
Carbon Steel: ASTM A 105 and ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9 and F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22 and C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8\\\\\\\" NB to 48\\\\\\\"NB
Class: 150, 300, 400, 600, 900, 1500 & 2500

Standards available:

ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36 and ANSI B16.48
DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638 and DIN2673
B.S: BS4504, BS4504, BS1560 and BS10

PRODUCT OVERVIEW
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN
10268:2014, AASHTO LRFD: 2007 Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high
loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc.
with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior
design, which is convenient for installation and maintenance during operation

2. PRODUCT CHARACTERISTICS
VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences
the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures.
Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing.
Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point.
Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements.
To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods:
two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117
standards

Dimensions of upper plate in longitudinal direction
Dimension of center point of anchor bolts of the upper plate on
longitudinal direction
B: Dimension of the upper plate on transverse direction
Dimension of center point of anchor bolts of the upper

Name Of Product - Upscale Hot and Cold Waist Gel Bead Pack

Key Specifications/Special Features - Microwaveable and freezable hot and cold therapeutic beads to give relief from LOWER/UPPER BACK PAIN, TORSO OR MID-SECTION INJURIES, STRAIN OF LUMBAR MUSCLES BENEFIT OF HOT THERAPY: Heat therapy encourages blood vessels to dilate increasing one's blood circulation. Increase blood circulation brings a supply of oxygen and nutrients to the specific tissues where the source of heat is applied. This in turn encourages the removal of cell waste. Muscle spasms that may be occurring should decrease after applying heat therapy. BENEFIT OF COLD THERAPY : Cold therapy is recommended to aid injuries with a therapeutic effect. In most cases, cold therapy is the first aid applied immediately for sports related injuries. This will keep swelling down, minimize inflammation, reduce pain and discomfort. Switching from hot to cold therapy can also assist in healing after the initial hot MATERIAL : Made of safe material of medical grade. Gel beads inside , 0.3mm PVC outside with fabric backing for softer feel and elastic straps. Reusable and non toxic, BPA free. GEL beads provide form fitting support. Product dimension : 120X13.6 cm. Weight : 500 gms . application has been applied. USAGE INSTRUCTIONS : For cold application - Place the pack in freezer for at least 2 hrs or until desired temperature is reached. Before application , check the temperature is suitable. For hot application : Start with room temperature pack. Wrap pack in moist cloth or paper towel and place pack in center of clean microwave turntable. Microwave pack for 25-30 seconds.

Product Keywords - Wall Mirros, Wall Hangings, Show Items, Gift Items

Name Of Product - Upscale Hot and Cold Waist Gel Bead Pack

Key Specifications/Special Features - Microwaveable and freezable hot and cold therapeutic beads to give relief from LOWER/UPPER BACK PAIN, TORSO OR MID-SECTION INJURIES, STRAIN OF LUMBAR MUSCLES BENEFIT OF HOT THERAPY: Heat therapy encourages blood vessels to dilate increasing one's blood circulation. Increase blood circulation brings a supply of oxygen and nutrients to the specific tissues where the source of heat is applied. This in turn encourages the removal of cell waste. Muscle spasms that may be occurring should decrease after applying heat therapy. BENEFIT OF COLD THERAPY : Cold therapy is recommended to aid injuries with a therapeutic effect. In most cases, cold therapy is the first aid applied immediately for sports related injuries. This will keep swelling down, minimize inflammation, reduce pain and discomfort. Switching from hot to cold therapy can also assist in healing after the initial hot MATERIAL : Made of safe material of medical grade. Gel beads inside , 0.3mm PVC outside with fabric backing for softer feel and elastic straps. Reusable and non toxic, BPA free. GEL beads provide form fitting support. Product dimension : 120X13.6 cm. Weight : 500 gms . application has been applied. USAGE INSTRUCTIONS : For cold application - Place the pack in freezer for at least 2 hrs or until desired temperature is reached. Before application , check the temperature is suitable. For hot application : Start with room temperature pack. Wrap pack in moist cloth or paper towel and place pack in center of clean microwave turntable. Microwave pack for 25-30 seconds.

Product Keywords - Wall Mirros, Wall Hangings, Show Items, Gift Items

Brief Introduction of the CFB Boiler
The circulating fluidized bed boiler is a high pressure, single drum, steel structure and natural circulation boiler. The arrangement for the integrated boiler is adopted. Rectangular section of the combustion is adopted for the boiler. The membrane wall construction is arranged for the four sides walls of the furnace and enclosure of the rear pass. Water-cooled platen and secondary super-heater are arranged in the furnace while abrasion resistant refractory is lined in the emulsion zone at the lower part of the furnace to protect the furnace from erosion in operation. The super-heaters are divided into SH1, SH2 and SH3. Convection super-heater, economizer and horizontal tubular air pre-heater with primary and secondary airflow separators are arranged in the rear pass in sequence.
Two hot or steam-cooling cyclones with U type loop seal is arranged between the furnace and rear pass of the boiler. The cyclones are lined with refractory to assure reliable operation. Anti-explosion buck-stay and expansion center with non-metal expansion joint are arranged for the boiler to solve the tri-direction expansion problem.



Technical Features of the Boiler
* The design of the advanced water-cooled grid with even distributed air, large bell type nozzle, reasonable resistance and no blocking makes the boiler long service life ;
* Large width-to-depth ratio of the furnace to facilitate the secondary air passing through and being mixed ;
* High efficiency heat insulation cyclone separator is adopted ;
* Stable and reliable operation and high efficiency insulated or air-cooled cyclone ;
* Self equilibrating U type loop seal for returning the circulating material to make the control simple and reliable ;
* Three stage super-heater arrangement with the secondary super-heater in the furnace to improve the radiant characteristic of the super-heater efficiency ;
* Spray type de-super-heating is adopted to get fast de-super-heating reliably and safely ;
* Tubular air pre-heater with the primary and secondary air separate arrangement.

Item Code
Description
Packing
Dimension


CON-53885
Aluminium Turkey Container
1x50
L 525x W 325x H 70 MM


CON-8368
Aluminium Container 8368
1x900
L 197x W 3124x H 45 MM


CON-73365
Aluminium Container 73365
1x100
L 322x W 263x H 60 MM


CON-83190
Aluminium Container 83190
1x250
L 315x W 215x H 38 MM


CON-8367
Aluminium Container 8367
1x500
L 204x W 112x H 50 MM


CON-8325
Aluminium Container 8325
1x1000
L 127x W 100x H 35 MM


CON-83120
Aluminium Container 83120
1x400
L 235x W 190x H 35 MM


CON-83115
Aluminium Container 83115
1x500
L 225x W 177x H 35 MM


CON-8384
Aluminium Container 8384
1x500
L 215x W 160x H 38 MM


CON-83185
Aluminium Container 83185
1x400
L 244x W 192x H 51 MM


CON-83241
Aluminium Container 83241
1x200
L 244x W 244x H 48 MM


CON-8576
Aluminium Container 8576(3 Section)
1x500
L 225x W 177x H 30 MM


CON-8357
Aluminium Container 8357
1x750
L 158x W 159x H 35 MM


CON-8342
Aluminium Container 8342
1x1000
L 147x W 122x H 40 MM


CON-8342
Aluminium Container 8342E
1x1000
L 147x W 122x H 40 MM


CON-8389
Aluminium Container 8389
1x1000
L 210x W 140x H 38 MM


CON-8389E
Aluminium Container 8389E
1x1000
L 210x W 140x H 38 MM


CON-8582
Aluminium Container 8582(2 Section
1x500
L 225x W 177x H 28 MM


CAS-5430
Aluminium Plain Casserole
1x1000
L 161x W 110x H 30 MM


TRA-73121
Aluminium Tray 73121
1x300
L 271x W 177x H 28 MM


PLT-7148
Aluminium Pizza Plate 6 Inch
1x1000
L 163x W 163x H 24 MM


PLT-5159
Aluminium Pizza Plate 19 Inch
1x400
L 195x W 195x H 25 MM


PLT-5186
Aluminium Pizza Plate 9 Inch
1x400
L 250x W 250x H 22 MM


PLT-65220
Aluminium Platter 65220
1x50
L 548x W 360x H 29 MM


PLT-6550
Aluminium Platter 6550
1x150
L 116x W 87x H 25 MM


PLT-65180C
Aluminium Platter 65180C
1x50
L 430x W 285x H 32 MM


PLT-6575
Aluminium Round Platter 6575
1x150
L 110x W 95x H 26 MM

Design Features & Benefits
The spiral plate heat exchanger is made by rolling two long metal plates around a center core to form two concentric spiral flow passages, one for each fluid. The plate edges are welded shut so that each fluid stays within its own passage and there is no flow bypassing or intermixing. Channel plate width and spacing (gap between plates) are optimized for the specified duty, maximum heat transfer, and ease of access. The plate gap is maintained by welded spacer studs although some designs do not require them.

Due to its inherent circular design and large surface area to volume ratio, the spiral heat exchanger offers unique advantages over other types of heat exchangers like the shell and tube.


High Thermal Efficiency
Single and long curving flow passages with a uniform rectangular cross-section ensure superior flow distribution, intense turbulence, and high heat transfer coefficients (50-100% greater than shell & tubes).

Self-Cleaning Passages
The spiral's single-flow passages induce high shear rates that scrub away deposits as they form. This self-cleaning effect reduces fouling and makes spiral heat exchangers ideal for handling tough fluids such as process slurries, sludge, and media with suspended solids or fibers.

Countercurrent or Co-current
Spiral heat exchangers normally operate in true countercurrent flow for close approaches and temperature crosses. Occasionally a co-current flow design has major benefits, especially in cooling or heating fluids prone to gelation, burn-on, freezing or similar skin temperature related fouling.

Small Footprint & Easy Access
The spiral heat exchanger is compact and requires minimal space for installation and servicing. Removable covers provide easy access to interior heat transfer surfaces for field inspections, routine maintenance, or manual cleaning if required.

AAAC (Aluminum Conductor With Profile Wire)
Product Overview
As a trusted bare conductor supplier, Hebei Yingshang Aluminum Industry manufactures high-performance AAAC conductor (Aluminum Conductor With Profile Wire) designed for medium- and high-voltage power transmission and distribution projects.
These conductors are made by drawing high-purity aluminium into non-circular cross-section single wires through precision molds and then assembling them with concentric twisting technology. The resulting profile optimizes the conductor's cross-sectional structure, minimizing gaps and improving space utilization. This makes AAAC conductors ideal for urban high-voltage networks, rural distribution lines, high-altitude transmission, compact bus ducts, and special power grid scenarios where efficiency, low loss, and reliability are critical.
Conductor Structure
Monofilament Profile:
Single wires feature non-circular shapes such as trapezoid, fan-shaped, Z-shaped, or semi-circular, with trapezoidal and fan-shaped being the most widely used.
Twisting Method:
Irregular single wires are arranged concentrically from the center outward.
Outer layer strand count increases with conductor size.
Twist pitch is reduced compared with circular wires, preventing strand slippage and improving mechanical stability.
Benefits of Profile Wire Structure:
High space utilization (gaps between strands only 3â??5%)
Conductive cross-section 10â??15% larger than equivalent round wires
Compact design reduces conductor diameter while maintaining performance
More: https://www.ysalindustry.com/products.html

Sticky rice is a type of rice grown mainly in Southeast and East Asia which has hard grains and is especially sticky when cooked. Northern and northeastern Thais traditionally eat glutinous rice as their staple food. Sticky rice is used as a main ingredient in many well-known Thai desserts such as sticky rice with mango.

Kow Neuw Moon
1 cup coconut milk
2 pinches salt
1 cup Glutinous Sticky Rice
2 tablespoons sugar
The Traditional Method Using a Steamer:
Soak the sticky rice in enough water to cover the rice for at least an hour and even overnight. Take your steamer, put water in the bottom and cover the steam section with cheese cloth or muslin cloth. Pour the sticky rice on the cheesecloth, cover with the lid and put it on the stove on medium to high heat. The sticky rice should take about a 20 minutes of steaming to cook and will become translucent when done.
The Microwave Method:
Soak the sticky rice for 10 minutes in warm water in a bowl. Soaking the rice is very important. The water level should be just above the rice, which comes out to be 1 cup of rice and a little over 1 cup of water (about 10% more). Cover the bowl with a dish and cook in microwave for at full power 3 minutes. Stir the rice around to move the rice from the top to the bottom. You will notice that some of the rice is translucent or cooked and some still has white center or the uncooked portion. Heat it up again for another 3 minutes. Check and see if it is done. When cooked, all the rice should be translucent. If it needs more cooking, we recommend heating up and checking every 3 minutes or so. How long it takes to cook really depends on your microwave.
Putting it together: Heat the coconut milk in a pot over medium heat. Stir constantly and let the coconut milk simmer. Hard boiled coconut milk will curdle. Add sugar and salt. Remove from heat. Pour 3/4 of the hot coconut milk over the hot sticky rice. Let it sit for 5 minutes. The hot sticky rice will absorb all the coconut milk. The rice should be a little mushy. Spoon the rest of the coconut milk on top of the rice at serving time.

PRODUCT INFO
Banana flowers have a starchy, fibrous consistency and a neutral, subtly bitter, and fruity flavor well suited for fresh and cooked preparations. The outer, dark-hued bracts should not be consumed, but they can be used as a decorative serving vessel. As each bract is removed, the small florets can be separated from their tough stamens and set aside for use with the flower's heart. Once the bracts have been peeled away to reveal a yellow-white hue, the heart can be sliced into pieces and incorporated into recipes. It is recommended to immerse slices of the Banana flower in salted lemon water or vinegar water for at least 20 to 30 minutes to extract some of the bitterness. Banana flowers can be added to fresh fruit and green salads, and younger flowers will have a sweeter flavor for raw preparations. They can also be minced into dips, dumplings, and pastes.

USES
Beyond fresh preparations, Banana flowers can be lightly steamed and served with dips, similar to an artichoke, boiled in coconut water and stir-fried, or incorporated into curries and soups. The flowers can also be fried into patties, soaked in flavoring, cooked like fish fillets, or sauteed into vegetable, rice, and noodle dishes. In Thailand, young Banana flowers are commonly served raw on the side with pad Thai. In Indonesian cuisine, Banana flowers are mixed with pork and hot sambal, cooked in a section of bamboo, and served as a festival or wake appetizer. In Brazil, Banana flowers are incorporated into pies, quiches, and cooked into various sweet and savory goods. There is also a famous pastry in the Brazilian state of Minas Gerais known as pastel de agnu that has its own festival. The festival annually occurs in the city of Itabirito and features food vendors, local growers, restaurants, and arts and crafts vendors, all centered around the famous pastry of the region. Pastel de agnu is comprised of Banana flowers stewed with meat and then fried into a dough-like puff. Banana flowers pair well with spices such as turmeric, curry powder, mustard seeds, cumin, and chile powder, aromatics including garlic, shallots, onions, lemongrass, and galangal, coconut milk, macadamia nuts, lime leaves, papaya, and carrots. Whole, raw Banana flowers should be immediately consumed for the best quality and flavor. The flowers can also be wrapped in plastic and stored in the refrigerator, or cut pieces can be placed in a sealed container in the fridge for 2 to 3 days. In addition to fresh Banana flowers, the buds can also be found canned or frozen for extended use.

SEASONS
Banana flowers are found year-round, varying in availability depending on climate, region, and hemisphere.

The conductor of control cable uses high-purity oxygen-free copper, with single wire cross-sections typically ranging from 0.5mm² to 10mm�² and core counts from 2 to 61. Conductor structures are available as solid (Class 1) or stranded (Class 2 or 5). Stranded conductors are more flexible, suitable for frequent bending or tight space installation. The insulation is typically PVC or XLPE. PVC insulation is economical and chemically resistant; XLPE insulation has a higher temperature rating (90â??) and greater ampacity. Insulation colors follow standard practices: black cores with white numbers, or color-coded (brown, blue, grey, green/yellow, etc.) for easy identification during on-site wiring. Each insulated core has uniform thickness and passes online spark testing to ensure no pinhole defects.
Control cables can be equipped with shielding depending on the electromagnetic environment and mechanical protection requirements. Shielding types include copper wire braid, aluminum/PET tape wrap, or a combination of both. Copper wire braid with coverage of 80%â??90% effectively blocks external electromagnetic interference and prevents signal distortion. For high-interference environments (e.g., near variable-frequency drives), an overall shield or individual shield + overall shield structure can be added. The armor layer is typically steel tape armor (for mechanical pressure) or steel wire armor (for tensile strength), with a PVC or PE sheath over the armor. Armored cables are suitable for direct burial, conduit installation, or rodent-prone locations, effectively protecting cores from external damage. All metallic shielding and armor layers must be properly grounded to achieve optimal shielding performance.
Control cables can be classified into flame-retardant grades ZA, ZB, ZC, ZD to prevent flame propagation when installed in bundles. Fire-resistant cables (Type N) maintain circuit integrity for more than 90 minutes under flame exposure, suitable for critical control circuits such as fire alarm systems and emergency stop loops. Low-smoke halogen-free (LSZH) control cables produce very little smoke and no halogen gases when burning, avoiding secondary harm to personnel and electronic equipment â?? ideal for subways, hospitals, data centers, and other crowded or confined spaces. Oil-resistant control cables feature special PVC or thermoplastic elastomer sheaths to resist mineral oil, lubricating oil, and cutting fluids. All flame-retardant, fire-resistant, and environmentally friendly models pass national or international standard type tests, and third-party test reports are available upon request.

NEWLONG 1835ST+560SH

SPECIFICATIONS:

CATEGORY
Bag Making
MANUFACTURER
Newlong
MODEL : 1835ST+560SH
SIZE : 350x555 mm
YEAR : 2021
AVAILABILITY : Immediately

DESCRIPTION:
Sheet-fed type Shopping Bag Making Machine with Handle Making Unit and Handle Inserting Unit
For the production of Luxury Bags for high-grade goods, such as perfume, fashion goods, etc... with High speed and stable operation
Machine Construction
- Sheet Feeder
- Handle Making Unit, Type 560SH
- Handle Inserting Unit
- Tube Forming Unit
- End Press Unit
- Tube Feeder
- Bottom Forming Unit
- Delivery Unit
Specifications
Bag Size(mm)
Bag Width
Bottom Width Finished Bag Length Tube Length
Mouth Folding Overlap Width
for longitudinal pasting
Without Handle:180 to 350
:60 to 160
:210 to 555:280 to 600
:
:25 to 30
With Handle 180 to 350 60 to 160 210 to 495 280 to 550 30to50
25 to 30
*1) Handle Center Distance (Bag width plus Bottom width) is in the range of 240 to 510mm. *2) Bag Width and Finished Bag Length must be restricted depending on the bottom width.
*3) Min. Bag Width and Min. The bottom Width must be restricted depending on the distance between
handles.
Size of Handle Patch Paper Roll Paper Width
Maximum Roll Diameter Paper Weight
Paper Core Inner Diameter
Sheet Size(mm) Sheet Paper Width Sheet Paper Length Paper Basic Weight
:510 to 1050:280 to 650
:80 to 140 g/m2
510 to 1050 280 to 600
: 90 mm
: Max. 1,100 mm Dia.
: 100 to 110 g/m2
: 76 mm�? (3 inches)
1
NEWLONG MACHINE WORKS, LTD. Reference Only Size of Handle
Material of Handle
Material Size (Twisted Rope) Material Size (Flat Rope) Sealing Method
Handle Shape
Patch Cutting Length
Patch Width Handle Height
: Twisted Paper Rope
: Twisted PP Rope
: 4 to 6 mm Dia. (Max. 8mm of PP Handle) : 8to10mmWidthx1mmT
: Hot-melt
: 152.4 mm (6 inches fixed) : 45 mm
: 105 to 125 mm
Max. 150 shots/min. (Mechanical design speed) : Nor. 110 or more bags/min.*
: Nor. 110 or more bags/min.*
: Nor. 90 or more bags/min.*
Machine Speed
Without Twisted Rope Handle
With Twisted Rope Handle With Flat Rope Handle
*Depending on bag size, paperweight, quality of paper, rope, adhesive, and printing conditions.
2

NEWLONG MACHINE WORKS, LTD. Reference Only Configurations
- Sheet Feeder: Driven by Servo Control
1. Sucker Head (Movable by Handle / forward & backwards, up & down and traverse direction)
2. Sheet Positioner (GS) (Traverse by the handle, with digital positioner.)
3. Sheet Table (Automatically lifter type, Sheet Residual Alarm, and Over stop)
4. Double-Feed Detector (Detects by the limit switch, feeder stop.)
5. Sheet Traverse Device (Positioning by handle adjustment, with digital positioner.)
6. Sheet Intermittent Transfer: Servo Control
- Handle Making Unit 560SH Sectional Drive Type
1. Patch Paper Roll Stand
2. Handle Patch Width
3. Patch Paper Material
4. Paper Core Inner Diameter

AACTW (Aluminum Alloy Conductor With Profile Wire)
Product Overview
As a professional� bare conductor supplier,� Hebei Yingshang Aluminum Industry� manufactures high-performance� AACTW conductor (Aluminum Alloy Conductor With Profile Wire)� designed for modern overhead power transmission and distribution systems.
AACTW conductors are composed of� aluminium alloy special-shaped wires� that have undergone advanced processing to form non-circular cross-sections, such as trapezoid or special-shaped isosceles trapezoids. Compared with traditional circular wires, these profiled wires offer enhanced� electrical performance, mechanical strength, and space utilization, making them ideal for urban overhead lines, rural power grids, long-span cross-regional transmission lines, and power grid renovation projects.
� 
Conductor Structure
The� AACTW conductor� is typically made of multiple aluminium alloy single wires twisted concentrically:

Outer Layers:� Special-shaped aluminium alloy wires arranged in concentric layers, forming a uniform and tightly packed conductor.


Wire Profile:� Each special-shaped wire features an isosceles trapezoid cross-section with a circular arc base, providing improved packing density and mechanical performance.


Center Core:� Standard aluminium alloy circular wires or specially designed profile wires maintain overall conductor integrity and electrical uniformity.

This structure ensures efficient conductivity, high tensile strength, and optimized space utilization, reducing the overall conductor diameter without compromising performance.
� 
Core Performance Advantages
High Mechanical Strength
The aluminium alloy material inherently provides high tensile strength. Special shaping technology further enhances the strength of the conductor core, allowing it to withstand greater tension and support� long-span overhead transmission lines.
Excellent Conductivity
Through precise alloy design and shaping technology, AACTW conductor achieves stable conductivity suitable for medium and high-voltage transmission. Under comparable current carrying capacity, AACTW is significantly lighter than copper conductors, reducing tower load and installation complexity.
Optimized Space Utilization
The profiled wire design allows a tighter packing of strands, reducing conductor diameter and increasing current density per unit area. This improves thermal performance, mechanical stability, and overall power transmission efficiency.
� More: https://www.ysalindustry.com/products.html

Cold plate is used for re-cooling blocks prior to sectioning or as part ofan embedding center to cool molds after paraffin dispensing.

ACSRAS (Aluminium Conductor Aluminium Clad Steel Reinforced)
Product Overview
As a professional bare conductor supplier, Hebei Yingshang Aluminum Industry manufactures high-performance ACSRAS conductor (Aluminium Conductor Aluminium Clad Steel Reinforced) designed for overhead transmission lines operating in corrosive, coastal, and heavy-pollution environments.
ACSRAS is an upgraded composite overhead conductor featuring a structural combination of a high-conductivity aluminium outer layer and an aluminium clad steel reinforced core. By replacing the traditional galvanized steel core used in conventional ACSR with an aluminium-clad steel core, this conductor retains the high tensile strength of steel while effectively eliminating electrochemical corrosion between dissimilar metals. The result is improved corrosion resistance, stable electrical performance, and extended service life in harsh operating conditions.
 
What Is ACSRAS Conductor?
ACSRAS (Aluminium Conductor Aluminium Clad Steel Reinforced) is a composite overhead conductor consisting of:
Outer layers: Hard-drawn aluminium strands for efficient electrical conductivity
Core: Aluminium-clad steel wires that provide high tensile strength and enhanced corrosion protection
Unlike conventional ACSR, the aluminium-clad steel core improves resistance to atmospheric corrosion while maintaining excellent mechanical performance, making aluminium clad steel reinforced conductor a preferred choice in harsh or corrosive environments.
Conductor Structure
Aluminium Clad Steel Reinforced Core
The reinforced core consists of 1, 7, or 19 strands of aluminium clad steel wires, concentrically twisted together. Each wire features a low-carbon steel core fully coated with an aluminium layer, with the aluminium thickness accounting for not less than 10% of the steel wire diameter.
Positioned at the center of the conductor, the aluminium clad steel core provides the primary mechanical strength. Because the aluminium coating shares the same base material as the outer aluminium conductor layer, electrochemical corrosion caused by heterogeneous metal contact is effectively avoided.
Conductive Aluminium Layer
High-purity aluminium wires are concentrically stranded around the aluminium clad steel core to form the conductive layer. The wires have a circular cross-section, with the number of outer strands increasing according to conductor size.
The aluminium layer serves as the main path for electrical current transmission. A controlled lay length of 12â??16 times the outer diameter ensures tight bonding with the reinforced core, maintaining structural integrity and stable electrical performance.
 More: https://www.ysalindustry.com/products.html

ACSRAS (Aluminium Conductor Aluminium Clad Steel Reinforced)
Product Overview
As a professional bare conductor supplier, Hebei Yingshang Aluminum Industry manufactures high-performance ACSRAS conductor (Aluminium Conductor Aluminium Clad Steel Reinforced) designed for overhead transmission lines operating in corrosive, coastal, and heavy-pollution environments.
ACSRAS is an upgraded composite overhead conductor featuring a structural combination of a high-conductivity aluminium outer layer and an aluminium clad steel reinforced core. By replacing the traditional galvanized steel core used in conventional ACSR with an aluminium-clad steel core, this conductor retains the high tensile strength of steel while effectively eliminating electrochemical corrosion between dissimilar metals. The result is improved corrosion resistance, stable electrical performance, and extended service life in harsh operating conditions.

What Is ACSRAS Conductor?
ACSRAS (Aluminium Conductor Aluminium Clad Steel Reinforced) is a composite overhead conductor consisting of:
Outer layers: Hard-drawn aluminium strands for efficient electrical conductivity
Core: Aluminium-clad steel wires that provide high tensile strength and enhanced corrosion protection
Unlike conventional ACSR, the aluminium-clad steel core improves resistance to atmospheric corrosion while maintaining excellent mechanical performance, making aluminium clad steel reinforced conductor a preferred choice in harsh or corrosive environments.
Conductor Structure
Aluminium Clad Steel Reinforced Core
The reinforced core consists of 1, 7, or 19 strands of aluminium clad steel wires, concentrically twisted together. Each wire features a low-carbon steel core fully coated with an aluminium layer, with the aluminium thickness accounting for not less than 10% of the steel wire diameter.
Positioned at the center of the conductor, the aluminium clad steel core provides the primary mechanical strength. Because the aluminium coating shares the same base material as the outer aluminium conductor layer, electrochemical corrosion caused by heterogeneous metal contact is effectively avoided.
Conductive Aluminium Layer
High-purity aluminium wires are concentrically stranded around the aluminium clad steel core to form the conductive layer. The wires have a circular cross-section, with the number of outer strands increasing according to conductor size.
The aluminium layer serves as the main path for electrical current transmission. A controlled lay length of 12â??16 times the outer diameter ensures tight bonding with the reinforced core, maintaining structural integrity and stable electrical performance.
More: https://www.ysalindustry.com/products.html

Cold plate is used for re-cooling blocks prior to sectioning or as part of an embedding center to cool molds after paraffin dispensing.

TECHNICAL SPECIFICATION:

Quick specimen cooling.
Capacity to holds up to 100 cassettes on itslarger working
surface.
Better cooling with Teflon coating.
Environment friendly refrigerant.
Temperature: -10/-20C
Cassettes capacity: 100
Voltage: AC 110V/ 220V @ 60Hz/ 50Hz
Dimensions: 790X480X470mm

Specification of Railways R50/R65:.

Second Quality-Railway used. Rail steel No. 1., standard section tee rails, original weight 50 Pound per yard, over heavier 120.50-meter long.. Steel No.2. cropped rail ends standard section original weight 50 pound per yard And over 12.50-meter long.. (28B) (28C) rail steel no.2T-rail ends standard section-original Weight 50 pounds per yard and over 12.50 pound per yard and over 12.50 meters rail, steelNo.3, standard section fee, gender, and /or guard rails, free from frog and switch rails not cut apart, and contain no manganese cast welds or attachment or any except angle bar also rails, not found and without radiation and explosive substance..1.0M(1.0-1.5M(Rail ferrous.(R50/R65) chemical composition shall be according to .1.0M(1.0-1.5M(Rail ferrous.(R50/R65) chemical composition shall be according to R65 gost 8165.75 weight 64.72KG / meter - C = 0.54%-0.82%-Sl=0.18-0.40%-MN=0.60-1.05%-S=0.05%-max-P=0.035% as 0.01 mix of mass share R50 gost 7173.75 weight 51.67KG / meter-C=0.54%-0.82%-Sl=0.18-0.40%MN=0.60-1.05%-S=0.05%-max-P=0.035% as 0.01 mix of mass share

3,650,1110 tone 1 meter 11040200003,939,459 1.20 meter 11040200003,410,586 1.5 meter 11040200003,501,847 1.80 meter 11040200002,960,338 2 meter 11040200002,150280 2.80 meter 110402000019,612,620 MT

A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron.

Features-

Independent feed mechanism with automatic safety device,
Universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen full swing protective cover for easy cleaning and lubrication.
The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques

Feed adjustments
1-50 µm
Overall Dimensions
1 µm


Minimum thickness
1 µm
Net Weight
30 Kgs. approx.


Total Feed excursions
28mm.
Gross Weight
42 Kgs. approx

The complete unit is packed with the following accessories in a wooden case :-

Object Holders (3 Nos.)
1 Set
Lubricating Oil Bottle
1 No.


Knife 120mm in a box
1 No.
Dust Cover
1No.


Honing Stone
1 No.
Operating Manual
1 No.

A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron.

Features :� 

Independent feed mechanism with automatic safety device,
Universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen
� full swing protective cover for easy cleaning and lubrication.
The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques




Feed adjustments
1-50 �µm
Overall Dimensions
1 �µm


Minimum thickness
1 �µm
Net Weight
30 Kgs. approx.


Total Feed excursions
28mm.
Gross Weight
42 Kgs. approx



The complete unit is packed with the following accessories in a wooden case :-



Object Holders (3 Nos.)
1 Set
Lubricating Oil Bottle
1 No.


Knife 120mm in a box
1 No.
Dust Cover
1No.


Honing Stone
1 No.
Operating Manual
1 No.

Garage doors, sectional type, for residential, commercial, industrial & agricultural use.

From 4 feet to 29 feet width. In metric or imperial measurement.

Leading Manufacturer & Dealer of Grid Section, Wire Mesh Bin, Wire Mesh Tray, Medical Shop Display Rack, Supermarket Center Racks and Supermarket Rack

The Model is a floor-to-floor incline or decline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline or decline to horizontal plane.
Detailed Product Description:
Decline Belt Conveyor of China
Bed Stainless Steel Galvanized Carbon Steel Aluminum Section
Belt Widths: 50-1200mm
End Drive (standard)
Driving Mode Motor Reducer
Adjustable Floor Supports Available
Reversible (with Center Drive).


Aluminum Section
Belt Widths: 50-1200mm
End Drive (standard)
Driving Mode Motor Reducer
Adjustable Floor Supports Available
Reversible (with Center Drive).

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.

options:
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 �°C
Choice of quick union or API flanged connections
Choice of bleed port connections

-

wireline BOP lubricator
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
The TIS lubricator and riser section range is available with the following options :

3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections

-

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.

options

The TIS lubricator and riser section range is available with the following options :

3" ID to 9" ID through bores

3ft to 20ft length options

5,000 Psi, 10,000 Psi and 15,000 Psi working pressures

Standard or sour service

Service temperature range of -29 to +121 °C

Choice of quick union or API flanged connections

Choice of bleed port connections

-

quad rams slickline BOP/wireline BOP
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.

options
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections

-

Injection blow hollow molding machine
This machine is composed of injection section, injection clamping, molding section, blow plastic clamping molding section, rotary lifting, stripping section, hydraulic section, electric control section, blow control section and others. A compressor and two mould temperature controllers must be bought by customer or are equipped according to the contract.
1.Usage
Our machine adopts injection blow molding technology and once-molding technology. It is a bottle of blower of making hollow bottles. It can produce high-grade bottle whose bottleneck has high precision. It is widely used manufacturing package bottles in pharmacy, food, cosmetics, chemical and others trades.2.Main structure
The machine is composed of frame, injection device, clamping molding device, injection blow rotary device, stripping device, hydraulic system, gas circuit system, electric control system and others. An air compressor and two mould temperature controllers must be bought by consumer or are equipped according to the contract.3.Characteristics
1). It adopts a thermal flow system and high pressure injection molding to get high recision of bottle mouth, bottleneck and screw.
2). The injection section adopts single-screw stem horizontal injection method.
3). High voltage locking mould adopts energy storing device, improve production efficiency.
4). It adopts auto stripping, auto flame treating and auto counting to ensure the products not be polluted to meet the healthy demands of food and pharmacy trades.
5). Adjust rings can be fixed in mechanical, hydraulic, air-control, electric.
6). The machine has low-mould protection, proportion pressure, flowing adjustment and other functions. It adopts advanced reliable hydraulic and electric components. Its noise is low and power consumption is small, the operation is safe and convenient.

Size :3.55f-1.46f-2.25
Weight :about 2t

A very versatile conveyor, the Horizontal Belt Conveyor can be used in many types of material handling situations such as assembly line operations, sorting, packing, and inspection. Conveyor sets up quickly and easily to save on installation time.
Detailed Product Description:
Belt Conveyor of China
Bed - Stainless Steel Galvanized Carbon Steel Aluminum Section
Belt Widths: 50-1200mm
End Drive (standard)
Driving Mode Motor Reducer Dynamoelectric Roller
Adjustable Floor Supports Available
Reversible (with Center Drive).


Bed - Stainless Steel Galvanized Carbon Steel Aluminum Section
Belt Widths: 50-1200mm
End Drive (standard)
Driving Mode Motor Reducer Dynamoelectric Roller
Adjustable Floor Supports Available
Reversible (with Center Drive).

Briefcase

A4 size document holder attached with 1 disk pocket, 1business card holder, 4 credit card slots, 1 digital calculator; 1 pen loop in the center and 1a4 size pad section of 50 pages on the other side

Model: Inflatable River Raft (YHR-2)
Length: 14'
Width: 7'
Weight: 126 lbs.
Frame Width: 66"
Max Frame Length: 82"
Tube Diameter: 20"
Thwart Diameter: 13.5"
Center Compartment: 45"W x 52"L
KickRocker (BowStern): 29"
Number of Air Chambers: 6
Number of D-Rings: 12
Number of Handles: 4.


140x68x50cm.

Backed by a team of dexterous experts, we are well known Manufacturer & Supplier of NOVA224 Premium Market Umbrella in New Taipei City, Northern Taiwan, Taiwan.

Features:-
- Operates with manual open system for your easy and quick use
- 4 fiberglass ribs for extra strength and steel center pole
- resist wind better
- Last longer. Without base
- Powder coated frame. 100% polyester 180gsm fabric with PU coated and color fastness, water resistant and not easy to fade
- Ideal for both residential and commercial locations. 6.5 feet
- Shade your 38" to 45" round, square or rectangle table with 3-4 chairs
- Reliable and Valuable Partner to Brighten Your Patio Life!

Specification
-Type: Square, w/o base, 4 ribs
-Overall Height: 7.3 ft.
-Canopy Diameter:6.5 ft. x 6.5 ft.
-Fabric: 6 oz. 180g/gsm polyester, water resistant PU coated, much thicker
-Color fastness to light: Fade-resistant. Grade 4 min. at 200 hours
-Fabric Color: Pacific Blue, Navy Blue, Hunter Green, Natural, Tuscan, Taupe, Antique Beige, Lime Green, Brick, Yellow
-Pole: Steel
-Pole Diameter: 1.14/1.25 inch (29/32 mm)
-Ribs: 9.5 mm in Diameter (hallow), fiberglass color finish 4 ribs
-Opening Mechanism: Manual Open
-Air vent: Yes
-Weatherable: Yes
-Commercial/Residential: Both