Pneumatic/hydraulic rotary connector slipring
Main parameter
Path number: per customer request
Working pressure: 0~1MPa or higher
Working media: Compressed air, Condensate water etc.
Working Temperature: -20°C~+60°C
Working speed: 0~50rpm or higher
Installation method: per customer request, or site design
Changeable parameter
Sealing element: material use China made or import
Structural material: carbon steel, aluminium alloy, stainless steel etc.
Connection mode: fast inserting, thread, flanged
Flow aperture: per customer request
Connection mode and specification: per customer request
Function desc:
Use on any rotating object to transfer tiny voltage , HF signal, EMF, thermocouple, computer signals, strain gauge, current, Inter Bus, Can-Bus, Profibus, RS422, RS485, PLC, digital/analog video, digital audio , Gigabit Ethernet, sensor signal and so on.
Specifications:
Electrical data: items value
Power signal
Voltage: 380vAC/DC or higher240vAC/DC
Wire specifications: UL Teflon Teflon
Insulation resistance: 1000M @ 500VDC500m@ 500vdc
Current rating: 10A per circuit or signal
Dielectric strength: 1000V@50HZ
Electric noise: 100M@6VDC,50ma,5rpm/min
Mechanical data
Circuits1--48
Operating speed: 600rpm
Working temperature: -40~ +80
Working humidity: 65%rh or higher
Wire length: 200mm
Housing material: aluminum alloy
Torque: 10g.m
Protection: IP51 or Higher.
With the increasing degree of factory automation, more and more mobile devices need to be powered or control signals transmitted. Although cable reels are easily overlooked, they are an efficient and stable mobile power supply solution.
The driving mode of cable reel is divided into spring drive and motor drive. Use these two drive forms to retract the cables needed for mobile devices. When the device moves in the opposite direction, the reel spools. The retractable cable is the basic operation of the reel and is the key to the safety and efficiency of mobile devices.
The use of cable reels can well accommodate the cables of mobile devices, avoiding the presence of exposed cables on the factory floor, thereby reducing personnel hazards. At the same time, the work efficiency is improved, the wear of the cable is greatly reduced, and the maintenance cost is reduced.
The electric cable reel not only includes the winding body and the drive mechanism, but also includes a slip ring box. The slip ring box is equipped with a slip ring and a brush assembly installed according to the requirements of the cable. Its role is to transfer the electrical energy from the power supply point to the cable reel cable. The slip ring and the brush complete the process. This is a kind of effective transmission of electrical energy. However, brushes are consumables that need to be inspected regularly and replaced in time after wear.
Victory-way Electronic(Shenzhen) Co., Ltd. is a professional manufacturer of conductive slip rings. The product design, production, and inspection process of cable reel slip rings are mature and advanced. Product quality is high quality and reliable. Our slip ring has been sold to more than 100 countries around the world and has won unanimous praise from customers.
To ensure that the cable line is always smooth, the slip ring is indispensable. According to different installation methods of the conductive slip ring, it is divided into three types of structures: slip ring internal type, slip ring external type, and cantilever type. Among them, the internal type slip ring has a compact internal structure and beautiful appearance; the external type slip ring is easy to repair; the cantilever slip ring is suitable for winding longer and heavier cables.
We select high-quality raw material suppliers; use advanced precious metal fiber brush technology to ensure the stable and reliable transmission of current and signal data; through scientific calculations, the pressure between the fiber brush and the ring road is optimized, making the slip ring Maximize the service life; every slip ring manufactured has undergone rigorous testing and provides comprehensive after-sales service.
Optical rotary connector slipring
Main parameter
Path number: per customer request
Working wavelength: 650nm~1550nm or others
Working Temperature: -40°C~+60°C
Working speed: 0~100rpm or higher
Insertion loss: differents depends on path number and fiber types
Echo loss: >50dB
Dynamic loss:
Rose Damascena flower water may be used as face clean toner.
Rose water Improves skin water balance.The contect of Rose oil into Rose water (around 0,06%) acts as a disinfectant and antibacterial ,so Rose water can be used to:
-disinfection in skin irritations, redness, insect bites
It cleanses, tones and gives a youthful appearance to each skin type while preserving the natural hydro-balance in the epidermis. Regular use of rose water in the form of tonic and face cleanser regulates the production of sebum and soothes and regenerates irritated skin.
It has antibacterial action. Applied externally to inflammatory processes, acne, skin redness, eczema and itchy skin. Suitable for baby skin.
-Aromatherapy uses its relaxing and soothing effect by placing it in a aromatherapy bath, in the bath, or spraying through a spray in the room. The fresh scent refreshes the spirit and harmonizes the mind. It has a toning and restoring effect, it brings a sense of romance.
23924 Through Bore Slip Ring For Wind Turbine Use Suppliers
Short on time? Let Through Bore Slip Ring For Wind Turbine Use sellers contact you.
Ethernet slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
The HE012 support 2 ~ 24 circiuts signal or power and 1 channel Profibus ethernet slip rings, with through bore size 12.7mm , overall diameter 56mm, flange mounting can optionel. It is standard, off-the-shelf, Color-coded lead wires are used on both the stator and rotor for simplified electrical connections.
Ethernet slip ring can mixed with electrical power and signal channel
USB slip ring can support 1-10 channels at the same time
Slip ring Ethernet can support the RJ45 connector
Military coating tenology , pricious metal and hard gold plating
Super low BER error rate and high signal to noise ratio
Benefits:
Unique signal handling performance with minimal electrical circuit noise
JARCH is a professional manufacturer of slip rings, cable reel, hose reel, carbon brush and rotary joints,founded in 1998,located in Baoan,Shenzhen,with more than 80 employees and 1000m2 plant.
We have 8 types of patented products at present and have established extensive and long-term cooperation with many domestic research institutes(Beijing University,SAS,,Beihang University,etc), and own a skilled management team.To creat the brand and do famous brand,we carry out strict performance ISO9001 standard of CQC.
Our slip rings are widely used in civil and military fields ranging from robot,spacecrafts, industrial automation, electric power generation, measurement instruments, medial equipments to building construction. Our main products have fiber optic rotary joint / Electro optical slip ring/ through bore slip ring/ Pneumatic electric rotary union/ Hydraulic rotary union/through bore slip ring/ Pneumatic rotary joint,etc.
Our products are sold to more than thirty provinces in China and exported to more than 38 countries. Our main customers have Huawei,Foxconn,Sany Heavy Industry,BYD,etc.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
Machine Structure Horizontal
Color Grey
Voltage 440
Condition Used
Operating Mode Automatic
Power 3-6kw
Pressure High Pressure
Uses Automotive Industry, Steel Industry
Specialities High Performance
Port India port
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents.
Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray.
A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear.
Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators.
Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
Fam: Cupressaceae
Juniper is widely distributed throughout the northern hemisphere and its birthplace is obscure. It is found in Europe, North Africa, North America and northern Asia. The main commercial producers are Hungary and southern Europe, especially Italy. The berries were known to Greek, Roman and early Arab physicians as a medicinal fruit and are mentioned in the Bible. In the Renaissance, they were recommended against snake bite, and plague and pestilence. Because of its air-cleansing piney fragrance, the foliage was used as a strewing herb to freshen stale air and the Swiss burned the berries with heating fuel in winter to sanitize stale air. Gin, the alcoholic drink that gets its unique flavour from juniper berries, is named from an adaptation of the Dutch word for juniper, "geneva".
Spice Description
Initially hard and pale green, juniper berries ripen to blue-black, become fleshy and contain three sticky, hard, brown seeds. When dried, the berries remain soft but if broken open one will find the pith surrounding the seeds is easily crumbled.
Bouquet: Fragrant and flowery, combining the aromas of gin and turpentine.
Flavour:Aromatic, bittersweet and piny.
Hotness Scale: 1
Preparation and Storage
Juniper berries are at their best when they are still moist and soft to the touch, squashing fairly easily between one's fingers. It is possible to make a purée from juniper berries or to extract the flavour and aroma by macerating them in hot water, but as all parts are edible and the texture is agreeable, it is usually just as well to use the entire fruit, split or crushed. The berries are quite powerful, one heaped teaspoon of crushed fruits serving for a dish for four people. Store in a cool place in an airtight container.
Culinary Uses
Juniper berries perform a quite unique role, by contributing as much to the character of food through their 'freshening' ability, as they do by way of their specific taste profile. As well as flavouring a dish, juniper cuts the gaminess of game, reduces the fatty effect of duck and pork and perks up a bread stuffing. The strong hearty flavour of juniper goes well with strong meats, such as game. Pork chops, roast leg of lamb, veal, rabbit, venison and wild boar are all enlivened with a hint of juniper. Juniper berries blend well with other herbs and spices, especially thyme, sage, oregano, marjoram, bay leaves, allspice and onions and garlic. One application I am particularly fond of is in a simple chicken casserole, It can effectively be added to wine marinades for meats, and is used with coriander in smoking meat. It seasons pâtés and sauces and in Sweden. Goulash and Sauerkraut often feature a juniper taste, as do some home-pickled meats like salt beef, salt pork and ham. Generally juniper can well be used in any dish requiring alcohol. Fruit dishes, such as apple tart and pickled peaches, also harmonize with this flavour.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality.
They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Chemical formula C4H6O5
C.A.S number 004-525-33-1
Formula weight 134.09
Appearance Colourless liquid
Assay Not less than 99.8%
Density 1.25g/cm3(20C/68F)
Application Using for the different beverages:
flavored water
energy drinks
tea drinks
juice till 100%
Mechanism of efficiency of DMDC DMDC can permeate through the cell membrane, and block the metabolism through reacting with the enzymes of microorganism, then achieve the purpose of sterilization. Even in very low additive amount, DMDC can effectively kill typical spoilage bacteria in beverage, and not affect the taste, flavor and color of the beverage. Furthermore, it could be rapidly and completely hydrolyzed to carbon dioxide and methanol, which are the natural ingredients of juice.
Package Gauga: 4KG/20KG
Storage conditions In optimal storage conditions (storage temperature: 20C-30C), the storage period is one year
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Slip rings also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
The TH038 uses JARCH's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 6.0mm through-bore for routing hydraulic or pneumatic lines. The 2~5 amps /circuit are available in 1-24 ring.
23924 Through Bore Slip Ring For Wind Turbine Use Suppliers
Short on time? Let Through Bore Slip Ring For Wind Turbine Use sellers contact you.
