Sodium Silicate is an inorganic chemical wherein its formulations vary depending on amount of Na2O and SiO2. This compound is well known as Water Glass in industries.
We mainly supply following types of Sodium Silicate:
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber
2002 Fiberglass Suppliers
Short on time? Let Fiberglass sellers contact you.
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality.
black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)
Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Fiberglass really is made of glass similar to that in windows or kitchen drinking glasses. To manufacture fiberglass, glass is heated until molten, then forced through superfine holes. This creates glass filaments that are extremely thin so thin, in fact, that they're best measured in microns
Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement.
It has the following advantages in relation to metal:
9 times lighter
3 times stronger
corrosion resistant
significantly accelerates the reinforcement process (knitting on the object is not necessary)
no need to put chairs
low thermal conductivity
Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different.
The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors.
With this exception, almost the entire range of concrete structures remains:
The main products of the company are: pipeline glass fiber cloth, non-alkali glass fiber cloth, non-alkali hydrophobic glass fiber cloth, 7628/2116/1080 electronic cloth, glass fiber belt, black glass fiber cloth, mesh cloth, high silicon oxygen fiber cloth, fire cloth, fire blanket, three anti cloth, T cloth, etc.
Our HighFlux Aruvi series hollow fiber Cartridges have the following salient features
Membrane Packing - About 50 square meter Membrane Area
Pre-filtration - Suitable Pre-filter for RO; Municipal Water & Industrial Wastewater
Low Pressure - Around 2 bar Pressure Operation
Higher Permeate - up to 1-3 cubic meter Permeate (vary depends on actual conditions)
Backshwash - Easy backwash process and cleaning
The product is a structural plate which uses high-strength E-Glass roving as reinforcing material, thermosetting resin as matrix and then cast and formed on a special metal mold. It provides properties such as: light in weight, high strength, corrosion resistance, fire resistance, solid and anti-skid,.
Pultrusion profile is a kind of compound materials which is formed by taking fiberglass as the reinforced material, and taking thermosetting resin as base, the fiberglass continuous roving enable the product to have the extremely high longitudinal strength, the fiberglass mat (continuous strand mat, knitted mat and so on) makes the product have the good transverse strength. The thermosetting resin base is usually the unsaturated polyester resin, the vinyl resin, or the epoxy resin and the phenolic resin, the resin base enable the product to have the good anti-corrosion property, the different resin enables the product to be suitable for various corrosion environment, to add the ultraviolet inhibitor and fire retardant may enable the product to have the outstanding anti-aging property and the different rank anti-flammable property.
Adopted filament winding technique, computer-controlled Lianzhong filament winding FRP corrosion-resistant tanks possesses the advantages of lightness, high strength and corrosion resistance and was mainly used as the container of acid, alkali, salt etc. raw material and the middle, final products in the chemical industry.
FRP pultruded grating has the most characteristics of molded grating, but it has its distinct advantages, it has very high fiberglass content in the loading direction, so it has very high load capability, it has more superiority when used at wide span, so that the basic support will be decreased and the project cost will be reduced accordingly.
The spec as follows:
Name:E- Fiber glass
micron:9-11micron
Length:30cm-70mm
Color:white
We also can supply it with your requirements.Please kindly give us your requirements.
Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.
Packaging
Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.
Stroge
Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate
Model : K9291, K9292, K9293, K9296, K9297
Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.
2002 Fiberglass Suppliers
Short on time? Let Fiberglass sellers contact you.
