The waterbone road marking paint is made of water as the dispersion medium, emulsified polyacrylic resin as the binder, and processed with the corresponding pigments, fillers and additives. During the construction process, the VOC emission is very small. A green product that can achieve clean production.
Fluorescent road marking paint is a kind of coating that emits fluorescence. It is made up of acrylic resin and fluorescent materials and other additives. It can absorb light under the illumination of the light source and convert it into another light of its own color. Therefore, it looks very bright and bright, and it can be painted with various signs to play the role of nighttime indication.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
Product: thermoplastic road marking paint
Used for: asphalt and concrete
Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦
Appearance: powder
Color: white/yellow (or other colors according to buyer's requirement)
Coating thickness: 1.6mm-2.0mm
Abrasion resistance: 56.8
Glass beads: 0%/10%/20%/25%/30%
Softening temperature: 90-104â°c
Heating temperature180-220â°c
Drying time after marking touch dryâ??3 mins full dryâ??10 mins
Shelf life 1 year
Storage: store in a tightly sealed container in a cool & dry place
Area of line:
1 ton thermoplastic paint can mark about 200 m2
Product formation:
Be composed by acrylic resin, special resin, pigment, filler and organic solvent. It is the ambient temperature self dry solvent type coating
, product features:, film hard and durable, high compressive strength, good adhesion, excellent wear resistance, weather resistance. technical data:, color and appearance of paint film colors and smooth film, viscosity (stormer viscometer), ku 80-100, dry film thickness, um 60-70, drying time (25, ), h surface dry1h, hard dry12h, fully cured 7d, adhesion (zoned method), class 2, impact strength, kg, cm 50, bending strength, mm 5, wear resistance, mg, 1000g/200r 50, flexibility, mm 2, water resistance 72days, , using:, widely used in the road, traffic crossing, workshop, warehouse, stadium and other places to set the line, , packing:, paint:20 kg/bucket.
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
Other Names: Traffic Hot-melt Paint, Road marking Paint High-reflective Thermoplastic JOLINE
Place of Origin: Ho Chi Minh City, Vietnam
Main Raw Material: Thermoplastic Ester Gum, Maleic Resin, Glass beads
Usage: Road Marking Paint
Application Method: Road marking applicator
State: Powder Coating
Brand Name: JOTON JOLINE
Model Number: JOLINE CA
Intermix glass beads ratio: >30%
Daytime Reflective index: min 80%
Film thickness: 1.5 -2 mm
Density:
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
52963 Road Marking Reflexive Paint Suppliers
Short on time? Let Road Marking Reflexive Paint sellers contact you.
