Other Names: Traffic Hot-melt Paint, Road marking Paint High-reflective Thermoplastic JOLINE
Place of Origin: Ho Chi Minh City, Vietnam
Main Raw Material: Thermoplastic Ester Gum, Maleic Resin, Glass beads
Usage: Road Marking Paint
Application Method: Road marking applicator
State: Powder Coating
Brand Name: JOTON JOLINE
Model Number: JOLINE CA
Intermix glass beads ratio: >30%
Daytime Reflective index: min 80%
Film thickness: 1.5 -2 mm
Density:
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint. The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type. Generally applicable to the old road over coating and road sections with very rough road structure.
Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,
Road Marking Paint
Road Marking Reflexive Paint (yellow, Black)
Supplier: Emulsions, enamels, water based interior and exterior coatings. epoxy, polyurethane, textured paints, universal tinters, nc paints for wood and metals and powder coatings, water based decorative paints, emulsions enamel (oil based paints) , Wood glue
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
