Product Brief
Three output line Max output could reach 160-200pcs/min.
Stable quality and convenient operating.
The Aluminum Mask Making Machine is well designed and orderly.
Suitable for non-woven Material.
Equipment size 9800*3000*1800 mm
speed 160~200pcs/min
voltage 220v - 50~60Hz
Total power of equipment 12.8KW
Equipment weight 2850Kg
Product Brief
Three output line Max output could reach 160-200pcs/min.
Stable quality and convenient operating.
The Aluminum Mask Making Machine is well designed and orderly.
Suitable for non-woven Material.
Equipment size 9800*3000*1800 mm
speed ~200pcs/min
voltage 220v - 50~60Hz
Total power of equipment 12.8KW
Equipment weight 2850Kg 160
Product Brief
Three output line Max output could reach 160-200pcs/min.
Stable quality and convenient operating.
The Aluminum Mask Making Machine is well designed and orderly.
Suitable for non-woven Material.
Equipment size 9800*3000*1800 mm
speed 160~200pcs/min
voltage 220v - 50~60Hz
Total power of equipment 12.8KW
Equipment weight 2850Kg
Product Brief
Three output line Max output could reach 160-200pcs/min.
Stable quality and convenient operating.
The Aluminum Mask Making Machine is well designed and orderly.
Suitable for non-woven Material.
Equipment size 9800*3000*1800 mm
speed 160~200pcs/min
voltage 220v - 50~60Hz
Total power of equipment 12.8KW
Equipment weight 2850Kg
Non Woven Free Size Disposable Shoe It Keeps Both Contamination From Shoes And Contaminated Shoes From Spreading The Disease. Put On Your Shoe Covers, Make Sure That All Areas Of The Foot And Shoe Are Covered. Try Not To Touch The Floor Or Other Areas With Your Hands While Putting The Shoes Covers On
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Blue face masks flat Non Woven Thick 3-Layers disposable Breathable Facial Masks with EarloopÂ
3-i: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch.
Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen.
Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
Upgraded Nose Clip & Ear Loop-- The Extra-soft elastic ear loops could eliminate pressure to the ears for maximum comfort. It can be used with earloop holders for additional comfort
� Widely Applicapable Indoor&Outdoor Facial Masks for Daily Uses-- Our personal protective masks are worn all over the world in most common workplace environments. They are suitable for public transportation, shopping, school, and other public settings.
3-Layered Protection-- The disposable face mask is made of Premium Melt-Blown Cloth; the outer layers is a high-quality non-woven fabric and the center layer is a filtration non-woven fabric.
Product Tech
SMS Medical Nonwoven Fabric
Composition
100% PP
Weight Range
10gsm-100gsm
Workable Width
Between 100 and 3,100mm
Roll Diameter
Between 800 and 1,500 mm
Core Dia
76 mm
Color Option
White
Applications
Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature
1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging
Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications
ISO9001:2000, GMPC, SGS
Production Lead
20-40 days after receiving the deposit and confirming the samples
Payment Terms
30%T/T Deposit, Balance Against B/L Copy
OEM Service
Yes
Product Tech SMS Medical Nonwoven Fabric
Composition 100% PP
Weight Range 10gsm-100gsm
Workable Width Between 100 and 3,100mm
Roll Diameter Between 800 and 1,500 mm
Core Dia 76 mm
Color Option White
Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature 1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications ISO9001:2000, GMPC, SGS
Production Lead 20-40 days after receiving the deposit and confirming the samples
Payment Terms 30%T/T Deposit, Balance Against B/L Copy
OEM Service Yes
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
Origin: Guatemala
Code: 2025875BN
Material: PP Non-woven on bales Natural
Category: PP
Type: Non-woven
Color: Natural
Quantity: 680Tons
Loading weight: 17 Tons
Specification: "40 loads are available PP non-woven on bales from melon production,
will have some dirt/moisture. Yield % for this should be 60% or higher, might be higher than 70%.
It has some dirt and moisture but I would rather be cautious on yield %.
Loading weight: 17 MT+
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Fruits like apples, oranges, papaya, pear, lemon, kiwi, loquat, melon, vegetables like potatoes, garlic, tomato, ginger, carrots, cucumber, pepper, onion, garments, face mask, coffee beans, windows and doors (a different kind), glasses (different of glasses), sun houses, wooden pellets furniture, pet products kids toys.
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
TEXTILE WASTE WHITE FABRIC CLIPS CUTTINGS NON WOVEN BALES
Composition of clips cuttings approx 60 POLYESTER approx 30 VISCOSE and approx 10 TENCEL LYOCELL
May have foreign bodies approx 1 comes from baling procedure
POST INDUSTRIAL
MATERIALS COME FROM FACTORY THAT PRODUCE BABY WIPES
Can load in 1x40HC container approx 22 MT 10
29695 Non Woven Mask Three Output Line Suppliers
Short on time? Let Non Woven Mask Three Output Line sellers contact you.
