B29 PASS
Affordable/economical prices
Not hot on hands.
Fragrant and fresh
Lots of foam and easy to rinse
Clean and sturdy for cooking utensils
The cream is soft on the hands.
Size : 100 gr x 48 x Dimensi Ctn (mm) 300 x 222 x 102
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
14298 Foldable Passing Arc Suppliers
Short on time? Let Foldable Passing Arc sellers contact you.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 250 to 350 GSM.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Quilting -
Middle Layer - Normal wadding or FR wadding as per needs
Inner Layer - Normal lining or FR lining as per needs.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Quilting -
Middle Layer - Normal wadding or FR wadding as per needs
Inner Layer - Normal lining or FR lining as per needs.
Size �?�¢??
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic IFR, 180 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 240 GSM
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU)
Safety Performance -
General - EN ISO 13688, EN ISO 20471, ISO 15797
Arc - EN 14116, EN 11611, EN 11612, NFPA 2112
Fire - EN 61482, EN 1149, EN 2112
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
Malaysia Cardinal / Passed SGS Available
50% TT ï¼?$ 14.40 Buyer $ 0.8 Commission
Production quantity 300K-50M
Production time 1-12 Monthly
Otg first week 300K-3M
2 Moq 300K
3 FOB
A SBLC Price $14.90 /boxed
Buyer Part 0.7Commission
B Advance 50% TT Price $ 14.40 /Box
Buyer Part 0.8 Commission
4 CIF Sea ADD 0.70
AIR Discuss
*Make up 50% for each buyer and seller
SOP:
1, NCNDA, ICPO KYC
2, Seller FCO buyer Prove Fund or Bank Draft SBLC
3 DRAF SPA SPA SIGNED.IMFPA
4 Pay SBLC/ /TT 50%
4 INSPECTION AND PAY
5 CIF OR DD CIF +Boat $0.70
Air Price can discuss
6 Close deal, Going to next rolling
Notice
1, We are seller /Title
2 Marking Up Available
3 USA and CANADA Lawyer logistics Team
4 Why Insure get Production
We are Reseller/Title Holder We are not AH
Suppilier have over 20 success performance Case ï¼?we arrange Previous Performance sgs
Why can't ALLOCATION Holder get the goods or production line? We can get it
We pay T/T and Success experience this is why we can get all Production &Then sell to buyer ,We are reseller and Title holder We offer 2 % PB
Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.
Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass
Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.
Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
1. Product Functions and Features
Sodium Selenite is a supplement of selenite for animal nutrition.
The product has stable quality and good liquidity and is easy to mix process.
2. Â Introduction
Mixed feed additives and sodium selenite.
The additive of microelement selenite in feed.
Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes.
3. Appearance
Light Grey Powder
4. Product quality standard
1%selenite 5% Â selenite
Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10
Moisture % 5
Pass 450 m test sieve% 95
Total arsenic content (counted by As)% 0.0005
Lead content (counted by Pb)% 0.002
Cadmium content (counted by Cd)% 0.001
5.Packing:25kg/bag
6. Storage conditions, methods and precautions:
stored in cool and dry places, and used up as soon as possible once unpacked.
Product Name Sodium Benzoate
Specification Food Grade
Appearance White Powder/Granular/Sphere
Certification FDA, GMP, HACCP, ISO, KOSHER, QS, Halal
Purity: 99.5% min
[Molecular formula] C7H5NaO2
[Molecular weight] 144.11
[Use] widely used in food industry as Antiseptic, anti-animalcule and antifreezing agent used in food, medicine, tobacco, plating, printing and dyeing
[Quality index] in accordance with GB1902-2005 standard for edible grade and BP98 and China national codex 2000 for medicinal grade
Package: 25kg net packed in woven bag, or 600kg net packed in ton bag
Container: 17MTS/20'FCL without pallets, 14MTS/20'FCL with pallets
For extruded, 16MTS/20' container
For powder: 17MTS/20' container
For granule: 20MTS/20' container
Item GB1902-94 version BP98 version China pharmacopoeia 2000 version
Content(base on C7H5NaO2 dry basis),% 99.0 99.0-100.5 99.0
Drying loss,% 1.5 2.0 1.5
Dissolve Meet the stipulation Meet the stipulatio
Transparency and color / Meet the stipulation
Alkalinity acidity; Meet the stipulation Meet the stipulation Meet the stipulation
Cchloride (base on Cl) 500PPm 200PPm/
Chloride(base on Cl),/ 300PPm/
Heavy metal(base on Pb) 10PPm 10PPm 10PPm
As(base on As),2PPm/ 5PPm
Sulfate (base on SO4),1000PPm //
Readily oxidizable substance Passed the test/
o-benzene tricarbonic acid Passed the test/
Product Physical Properties
WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE.
Specifications:
Appearance: white free-flowing crystalline powder without agglomeration
Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum)
Chloride (as Cl), % by weight 0.20(maximum)
Sulphates (as SO4),% by weight 0.10(maximum)
Iron (as Fe), % by weight 0.004(maximum)
Nonvolatile matter, % by weight 0.10(maximum)
Heavy metals (as Pb), ppm 2.50(maximum)
Copper (as Cu), ppm 5.0(maximum)
Arsenic (as As), ppm 0.6(maximum)
Tarry matter To pass test
Oil Content Less than 10 ppm
Melamine Content NIL
USAGE
BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC.
PACKING
OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST.
Paper gelato spoons, paper cutlery with food grade materials. sgs tested passed. haccp, fsc certified, cornstarch and baggasse containers, cutlery, cups , paper cutlery white and colored, paper icecream spoons colored, wooden cutlery, corn starch containers and cups, plates, cutlery, baggasse containers and cups, plates, cutlery, . paper plates, . paper cups, paper sorbetto spoon, paper spoons, paper cutlery, paper straw.
Native Rice Starch | Food Grade | HACCP, HALAL, US FDA Certified | FOB Thailand
Price : USD 350
Product Description :
"Product Description:
Our Native Rice Starch is a high-quality, food-grade ingredient extracted from premium Thai rice. With excellent whiteness, smooth texture, and neutral flavor, it is ideal for a wide range of applications including snacks, bakery products, baby food, sauces, and gluten-free recipes. Manufactured under internationally recognized food safety standards, this starch meets strict quality and purity criteria for global markets.
Key Features:
Superior Whiteness & Texture Bright, smooth, and ideal for clean-label food applications
Neutral Taste Perfect for taste-sensitive recipes and baby foods
Gluten-Free & Allergen-Free Natural alternative to wheat or corn starch
High Functionality Excellent thickening, binding, and gelling properties
International Certifications Fully compliant with global food safety standards
Custom Packaging & OEM Support Export-ready for private label and industrial supply
Packaging & Delivery:
Pricing Terms: FOB Thailand, $350 per metric ton
Minimum Order Quantity (MOQ): 25 Metric Tons/20 feet container
Packaging Options: 5kg, 10kg, 25kg, 50kg PP Bags or Customized Packaging Available
Contact US
Contact us today for samples, pricing, and detailed technical sheets. Ensure consistent, premium-quality rice starch for your business at competitive FOB Thailand prices. Inquire now to start a long-term, reliable partnership.
