Common Name: Fipronil
Chemical Name: (¡¨¤)-5-amino-1-(2,6-dichloro-a,a,a-trifluoro-p-tolyl)-4-trifluoromethyl sulfinylpyrazole-3-carbonitrile
Molecular Formula: C12H4Cl2F6N4OS
Molecular Weight: 437.2
Physical Chemistry:
Form White solid. M.p.200-201; (tech, 195.5-203) V.p. 3.7¡¨¢10-4mPa(25); Kowlogp=4.0(shake flask method); Henry 3.7¡¨¢10-5Pam3nol-1(calc.); S.g./density 1.477-1.626(20). Solubility in water 1.9(pH5), 2,4(pH9), 1.9(distilled)(all in mg/l, 20). In acetone 545.9, dichloromethane 22.3, hexane 0.028, toluene 3.0(all in g/l, 20). Stability Stable in water at pH 5 and 7; slowly hydrolysed at pH9(DT50 c.28d). Stable to heat. Slowly degrades in sunlight (c.3% loss after 12d continuous irradiation); rapidly photolysed in aqueous solution (DT50 c.0.33d).
Use:
Control of multiple species of thrips on a broad range of crops by foliar, soil or seed treatment. Control of corn rootworm, wireworms and termites by soil treatment in maize. Control of boll weevil and plant bugs on cotton, diamond-back moth on crucifers, Colorado potato beetle on potatoes by foliar application. Control of stem borers, leaf miners, planthoppers, leaf folder/rollers and weevils in rice. Foliar application rates range from 10-80 g/ha; soil treatment rates 100-200 g/ha.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Castor meal is also variously called castor meal, castor residue, castor extract & de-oiled castor cake
Castor meal - the residue obtained from castor cake by the solvent extraction process - is one of the most versatile natural manures. It is truly organic manure which enhances the fertility of the soil without causing any damage or decay. It is enriched with the three big elements vital and conducive to the proper growth of crops - Nitrogen, Phosphorus and Potassium. It also has traces of nutrients like Manganese, Zinc and Copper, thus making it a balanced fertilizer. Moreover, it helps to neutralize the detrimental effects of chemical fertilizers. Apart from their contribution to Nutrients, they have a number of benefits in agriculture, which none of the synthetic fertilizers or pesticides can offer. They bring in the wonderful molecules that nature has designed to help the plants flourish naturally. They provide slow and steady nourishment, stimulation, protection from soil nematodes and insects; improve yields, and quality of product like taste, flavour, amino acid composition etc.
The pressed cake obtained after the expression of castor bean. The solvent extracted cake, although rich in protein cannot be used as cattle fodder because of its toxicity. However, it can be used as a fertilizer.
The protein content of castor seed meal varies from 21-48% depending upon the extent of decortications. It has an ideal amino acid profile with moderately high Cystine, mithionine, and isoleucine. But its ant nutritional substances, ricin, ricine and an allergen restrict its use in poultry feed, even at a very low level of inclusion.
Castor Cake is an excellent fertilizer because of high content of N (6.4%), Phosphoric Acid (2.55%) and Potash (1%) and moisture retention.
There is negative correlation between the contents of ricinine in castor seeds and oil content (r = -0.76). This content of ricinine in castor seed is determined by Agro climatic conditions.
Nutrient content of Castor Cake:
Organic matter - 75 - 80 %, Nitrogen - 4.0 - 4.5 %, Phosphorous - 1.5 %, Potassium - 1.25 - 1.5 %.
It also contains some micro nutrients viz., Calcium, Magnesium, Sulphur, Iron, Zinc, Manganese, Copper etc.
A typical composition of castor residue/meal is as follows:
Nitrogen - 4% min. approx.
Phosphorous - 1% min. approx.
Potassium - 1% min. approx.
Moisture - 10 - 12 % max. approx.
Oil Content - 0.7% max. approx.
Advantages:
1. It provides all the major & minor nutrients necessary for better plant growth.
2. It also helps in increasing the nutrient uptake by plants.
3. It improves the soil fertility and productivity.
4. It is known to protect the plants from nematodes and termites.
5. It improves the yield & quality of the farm produce.
6. It improves the physical, chemical and biological properties of soil
Red cubes International has more than 20 years of experience in the charcoal industry. supplying the best quality products to many major companies worldwide.
PRODUCT DETAILS :
Size : 25 x 25 X 25 mm
Fixed Carbon : 80% above
Ash : 2% to 3%
Volatile Matter : 12% to 14%
Moisture : 3% to 5%
Ash Color : White
Burning Time : 90 Mins
GCV : Above 7000 Kcal/kg
Packing : 13 to 14 grams x 72 Pcs x 1 kg printed carton box x
10 boxes in 10 kgs 5 ply master corrugated box
Containers : 17 Metric Tons in 20 ft Container - 1700 Boxes
28 Metric Tons in 40 ft Container - 2800 Boxes
Red cubes International has more than 20 years of experience in the charcoal industry. supplying the best quality products to many major companies worldwide.
Here we shared Sawdust charcoal briquette details and specifications ;
Fixed Carbon - Above 80%
Ash Content - Below 5%
Volatile Matter - 12% to 14% Max
Moisture - 5% Max
Gross Calorific Value - 7200 to 7500 Kcal/kg
Burning Time - 6 to 7 hours
Packing - 10 kgs packing with inner PP liner in printed
Master carton boxes
Loading Capacity - 27 Metric Tons in 40 feet container
Advantage - Long Burning Time, No Smoke, No Odour, No Spark
100% Natural & Eco-friendly.
Container - 20 feet & 40 feet container
About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.
GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk
Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Product name: Coconut Peat
Brand name: 99 Gold Data
Block size: 30 x 30 x 15 cm
Weight: 5 kgs (+/- 3%)
pH: 5.8 to 6.8
Compression Ratio: Over 75 Liters / Block
Moisture: 15 â?? 20% max
Electric Conductivity (E.C):
o High EC (Animal Bedding): 3.5 - 5 mS/cm.
o Low EC (For Plant Growth) < 0.5 mS/cm.
Impurities/sand: 3% max
Fiber length: Less than 2cm
Price: Negotiation
Packing: In PP bag 20kgs, or 5kg/block, 192 blocks/pallet, 24 pallets/40ft (23 MTs)
Payment method: T/T 40 in advance, 60% on scan bill, L/C at sight 100%
Delivery time: 10 - 20 days
Commodity: Nata De Coco / Coconut Jelly in Syrup or Raw
Ingredient: 80% jelly, 20% syrup or 50/50; 40/60 ( as buyer's requests)
Size: 3 mm, 5 mm; 7 mm, 10 mm; 12 mm, 14 mm as buyer request
Type: Star, animal, cuttle or buyer's request
Quality Specifications: Premium quality, naturally sweet, chewy texture, no added sugars or preservatives.
Quantity Load: 10 tons per shipment
Packing Details: 500g packs, 20 packs per carton
MOQ (optional): 5 tons
Payment Terms: T/T, L/C
Lead Time: 2 weeks from order confirmation
Prices & Grades (optional): $80 - $100 per kg depending on the grade
Specifications:
Clean and fresh.
Color: plump, shiny.
Place of Origin: Vietnam.
Supply period: All year round.
Size: 80-150g, 150g up. (5-8 cm, 8-12 cm).
MOQ: 1*20FCL.
Packing: 20kgs mesh bag or 10/20 kgs carton.
Payment & Delivery Terms:
Payment: T/T (50% in advance, balance negotiable)
Delivery: Fast and reliable shipping with secure packaging
Beside it, we also have other types like: Red Chilli, Lemongrass, Lime, Turmeric, Pepper. If you require additional pictures or videos, feel free to contact me
Automatic single-sided saw bone meat machine with 1pcs saw blade, automatic bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Paramters:
Machine size : 1350x2170x1700mm
Workbench size: 650x800
Food height for card loading (mm): 150
Dimensional accuracy (mm): 0.1
Cut thickness (mm): 80
The highest saw blade movement (m/s): 34
Saw blade specification (mm): 3084x16x0.56
Motor power (Kw): 3.5
Voltage: 380V/50HZ
Weight: 1100KG
Pressure increase (MPa): 0.4
Air volume requirement (L/min): 10
Cut back (times/minute): 10
Lactic Acid powder, E270, CAS no.50-21-5, Chemical Formula C3H6O3, It is a white powder used as food acidulent.
As an experienced Lactic Acid powder manufacturer and supplier, we has been supplying and exporting Lactic Acid powder for almost 10 years, we supply Lactic Acid Powder Food Grade 55%, 60% ; Lactic Acid Powder Feed Grade 52%, Lactic Acid powder 20%, 97%. please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Categories Preservatives
Qty in 20â??FCL 9000kg
Min Order 1000kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E270
CAS No. 50-21-5
HS Code 291811
Specification FCC/USP
Lactic Acid Powder Specification
Item specification
Appearance White powder
Assay(lactic acid) 58%-62%
Assay (calcium lactate) 35%-39%
Assay(silicon dioxide) 0-3%
Water solution 2.0%
Heavy metal total 0.001%
Sulphate 0.02%
Chloride 0.002%
Iron 0.005%
Arsenic 0.0001%
