Automatic lighting surge generator (or lighting surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gb/t17626.5 standards.
Specifications:
Product modelSg61000-5Sg61000-5tSg61000-5h12Sg61000-5h
Output voltage (open)1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%
Output current (short)8/20µs±20%8/20µs±20%8/20µs±20%8/20µs±20%
Output impedance2o2o2o and 500o2o and 500o
Output voltage range0~6kv±10%0~6kv±10%0~12kv±10%0~10kv±10%
Output current range0~3ka±10%0~3ka±10%0~6ka±10%0~5ka±10%
Surge repetition1~9999 times1~9999 times1~9999 times1~9999 times
Interval time20~9999s20~9999s20~9999s20~9999s
PolarityPositive, negative or positive/negative automatic
Phase shiftAsynchronous, synchronization 0°~ 360° or specific angle
Coupling/decoupling network (cdn)Includes a 16a single phase cdnIncludes a 20a 3phases cdnIncludes a 30a 3phases cdnBuilt-in 20a 3phases cdn
Dimensions (wxdxh)44x45x35cm44x45x55cm56x69x165cm56x69x155cm
Gross weightAbout 30kgAbout 48kgAbout 300kgAbout 270kg
Touch screen with super big lcd and built-in windows ce
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds.
OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems.
Tiny blood sample (1 microlitre)
End-fill strip automatically draws in blood
Indicator window shows when you have enough blood
Touchable strip
Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
7885 Automatic Lightning Surge Generator For Emc Test Suppliers
Short on time? Let Automatic Lightning Surge Generator For Emc Test sellers contact you.
Potassium chloride (KCl) is a chemical compound composed of potassium and chlorine. It is a white crystalline salt with the chemical formula KCl. Potassium chloride is widely used in various applications, including agriculture, food processing, medical treatments, and industrial processes. Here are some key points about potassium chloride:
Solubility: Potassium chloride is highly soluble in water, which makes it suitable for use in liquid fertilizers and irrigation systems.
Agricultural Use: Potassium chloride is a common source of potassium in fertilizers. Potassium is an essential nutrient for plant growth, contributing to processes like photosynthesis, enzyme activation, and osmoregulation.
It is particularly beneficial for crops that have a high demand for potassium, such as fruits and vegetables.
Fertilizer Grades: Potassium chloride is available in different fertilizer grades, with varying concentrations of potassium. The two primary grades are Muriate of Potash (MOP) and Sulfate of Potash (SOP).
Industrial Applications: Potassium chloride is used in various industrial processes, including the production of certain chemicals, pharmaceuticals, and metal processing.
It is employed in water softening systems to replace calcium and magnesium ions with potassium ions.
Food Additive: In the food industry, potassium chloride is used as a salt substitute for individuals seeking to reduce their sodium intake. It is often found in low-sodium or "lite" products.
Medical Uses: Potassium chloride is used medically, both as a supplement for individuals with potassium deficiencies and as part of intravenous fluids.
It is also used in certain medical tests and diagnostic procedures.
Compatibility: Potassium chloride is generally compatible with other fertilizers, and it can be used in combination with them to provide a balanced nutrient profile for plants.
Safety Considerations: While potassium chloride is generally recognized as safe when used appropriately, excessive intake can have health implications. Individuals with certain medical conditions, such as kidney problems, may need to monitor their potassium intake.
Environmental Impact: The application of potassium chloride in agriculture should be done responsibly to minimize environmental impact, such as nutrient runoff into water bodies.
Product Description
Categories Sweeteners
Qty in 20 FCL 9000kg, 11250kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E951
CAS No. 22839-47-0
HS Code 292429
Specification FCC/USP
Aspartame is an artificial sweetener, like Acesulfame Potassium, Sucralose, Sodium Saccharin, Sodium Cyclamate and Neotame. It is widely in daily food products to replace sugar. There are too many types of Aspartame in the market, generally are powder 100mesh, Granular 20-60mesh, Fine Granular 60-100mesh, HDP 100-200mesh and Super Fine Powder 300mesh.
Weâ??re China Aspartame supplier not only sell Aspartame but also provide manufacturers analysis, market price trends, free samples and also other food additives for mix combined.
Aspartame Powder 100mesh Specification
Test Item Specification
Appearance White Powder
Odor/Taste Conforms to Quality Standards
Identification Meets Requirements
Assay (on dry basis) 98.0% to 102%
Loss on Drying 4.5%
Residue on Ignition / Sulphated Ash < 0.2%
Optical (Specific) Rotation +14.5 and +16.5
Conductivity 30 Scm-1
Transmittance 95%
Extraneous Matter Free from material foreign to product
pH (0.8% Solution) 4.5 ~6.0
Heavy Metal (as Pb) 10 ppm
Lead < 1 ppm
Arsenic < 3 ppm
Residual Solvents Meets Requirements
5-benzyl-3,6-dioxo-2 Piperazineacetic Acid (DKP) 1.5%
Other Related Substances 2.0% USP/NF; 1.5% EP
L-phenylalanine 0.5%
Solubility Completely Dissolves
Particle Size NMT 5% on 100 mesh
Bulk Density 0.3 +/- 0.1 g/mL
Total Aerobic Plate Count 250 CFU/g
Yeast and Mold Count 100 CFU/g
Coliforms 3.0 MPN/g
Escherichia Coli Negative/g
Salmonella Negative/25g
Lump sulfur, also known as granular or rock sulfur, is typically characterized by a purity of 99.80% or higher, with a maximum ash content of 0.05%.
It should also have a limited acidity (H2SO4) of 0.02% or 0.03% and minimal moisture content (0.5% or 0.2%).
More detailed breakdown of lump sulfur specifications:
Purity:
Dry Basis: 99.80% minimum purity is a common specification.
Other Standards: Some standards like Refinery Specifications, may specify a purity of 99.98%.
Impurities:
Ash Content: A maximum ash content of 0.05% is a typical requirement.
Acidity: A maximum acidity (H2SO4) of 0.02% or 0.03% is common.
Organic Substances: Some specifications limit organic substances to 0.01% or 0.03% maximum.
Moisture: A maximum moisture content of 0.5% or 0.2% is generally specified.
Mechanical Impurities: Some specifications require the absence of mechanical impurities like paper, wood, or sand.
Other Impurities: Some standards specify limits for arsenic, selenium, tellurium, and lead impurities.
Color and Appearance:
Color: Bright yellow is the typical color specification.
Other Considerations:
Test Methods:
Specifications often include test methods, such as ASTM D-4239, ASTM D-1509, ASTM D-1613, and ASTM D-2790, for determining the various parameters.
Bulk Density:
Granular sulfur has a bulk density of around 70 lb/cu ft (1121.29 kg/cu m).
Solubility:
Sulfur is insoluble in water, partially soluble in acetone, and slightly soluble in diethyl ether and alcohol.
Small diesel generator set is a diesel-fuelled internal combustion engine driven alternator small power generation equipment, power range is usually between 7-30kW, by the diesel engine, generator, control box and fuel tanks and other core components, suitable for emergency power supply or mobile scene.
The units are usually air-cooled, and some models are equipped with water-cooled cooling structure to improve efficiency, and the silent design can control the noise at 65-73dB. The structure integrates shock-absorbing spring base, universal wheels and handles to support mobile deployment. Standard features include voltage/current monitoring, battery starter, and optional ATS automatic switching and remote start. Technical improvements include a spiral tube cooling system with a ventilated electric fan for synergistic cooling, as well as multiple protection mechanisms such as low fuel consumption (205g/kw.h) and automatic voltage regulation [1].
Manual start/stop mode - Electronic control panel selects manual mode, one key to start, one key to stop.
Automatic start-stop mode - electronic control panel AUTO one-key automation; utility power outage automatic start,
utility power incoming automatic shutdown.
Emergency stop mode - The unit is equipped with an external emergency stop button safety device, realising one-key stop in emergency.
Backup Start Mode - Car type key ignition start.
Note: To avoid the failure of the electronic control panel to start the unit
and add the standby type double insurance start, in the emergency power outage needs
to use the generator set is more secure!
With the help of experienced and skilled professionals, we are offering to our valuable clients a wide array of� Pigeon Breeder Feed: Grain Mixture Format� that is demanded among the clients to meet their requirements. These products are tested on several quality parameters to check their pure and unmatched quality. Our offered assortment of this product is available at the most reasonable and competitive prices.
Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor
Ingredient Profile : 100% Vegetarian
Product Form : Coarse Mash Form / Pellet Form
Product Branding : HAF
Net Weight : 39 Kgs When Packed
Product Pricing : On Unit Basis (for each 39 Kgs Packing)
Production Capacity per Day : 450 MT/Day
Factory Visit : Not Permissible
Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)
Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
We are involved in producing an exclusive range of� Low Yielding Cattle Feed.� These products are prepared using the best quality ingredient and tested on various quality parameters in order to ensure their optimum quality. Apart from this, we offer these feeds within a committed period of time.
Product Details:
Crude Protein : 16.0 % Minimum
Crude Fat : 2.0 % Minimum
Crude Fibre : 14.0 % Maximum
Acid Insoluble Ash : 5.0 % Maximum
Moisture (%) : 12% Maximum
General Details:
Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor
Ingredient Profile : 100% Vegetarian
Net Weight : 39 Kgs When Packed
Product Branding : HAF
Product Form : Coarse Mash Form / Pellet Form
Form : Granule
Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor
Ingredient Profile : 100% Vegetarian
Moisture (% Maximum) : 12
Product Form : Coarse Mash Form / Pellet Form
Product Branding : HAF
Net Weight : 39 Kgs When Packed
Product Pricing : On Unit Basis (for each 39 Kgs Packing)
Production Capacity per Day : 450 MT/Day
Factory Visit : Not Permissible
Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)
Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Peanut Hay Pellets are produced from Sun Cured Peanut Hay of Indian Origin. The Hay is passed through a Complex Process of Production, wherein required Steam and Cooking of the Hay is done. Removal of Toxic and Hazardous Contents is done to maximum possible extent. Being an Agro-Based Derivative, the nutritional value of the Hay Pellets is highly volatile in Nature. Due to efficient Production System the Volume of the Hay is densified to a maximum possible extent. The final product is absolutely� suitable for feeding Dairy and Meat Livestock and other Domestic Farm Animals.
Product Details:
Crude Protein : 12% to 16%
Crude Fat : 1.5% to 3%
Crude Fibre : 15% to 20%
Ash : 3.5 to 5%
Moisture : 12% Maximum
GENERAL DETAILSÃ? Ã?Â
Ingredients : Sun Cured Peanut Hay of Indian Origin
Ingredient Profile : 100% Vegetarian
Moisture (% Maximum) : 12
Product Form : Pellet Form
Product Branding : HAF�®
Net Weight : 39 Kgs When Packed
Product Pricing : On Unit Basis (for each 39 Kgs Packing)
Factory Visit : Not Permissible
Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)
Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Beef Stock Feed (BC-190220)
Provided Beef Stock Feed has been produced from ingredients like pulses, vitamins, corn based gluten meal, toxin binders, trace minerals, dried distillers grains with soluble corn, mold inhibitor, minerals and essential amino acids.
Product Details :
Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor
Ingredient Profile : 100% Vegetarian
Moisture (% Maximum) : 12
Product Form : Coarse Mash Form / Pellet Form
Product Branding : HAF
Net Weight : 39 Kgs When Packed
Product Pricing : On Unit Basis (for each 39 Kgs Packing)
Production Capacity per Day : 450 MT/Day
Factory Visit : Not Permissible
Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)
Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
