Find Verified Lead Tubes Suppliers, Manufacturers and Wholesalers

We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.

Leads
Composition structure
1. There must be no molten slag, particulate oxygen, inclusions and external pollution on the surface of lead ingots.
2. Lead ingots must not have cold partitions, and must not have flash burrs larger than 10mm (repairing is allowed).
Sign
1. Each lead ingot will be cast or printed with the trademark and batch number.
2. Use paint that is not easy to fall off to mark the brand mark on the lead ingot. The color and position of the mark should meet the requirements.
3. Each bundle of lead ingots should have a striking and difficult to fall off mark, indicating the manufacturer's name, product name, brand number, batch number and net weight.
Single weight of small ingot
48kg�±3kg,42kg�±2kg,40kg�±2kg,24kg�±1kg;
Single weight of large ingot
950 kg�±50kg,500 kg�±25kg
Package
The small ingots are bundled and packed with non-corrosive packaging tape. Large ingots are supplied as bare ingots

We make "CUSTOM" tubes as per the customer's needs and requirements (Engg. drawing or Sample or Sketch).
Material Test Reports (MTRs) are provided with every supply.

Mill Test Reports are provided as per the customer's needs and requirements.


Material:
Stainless Steel, Brass, Aluminium, Copper, Inconel, and others.

Type: Flat end, Radius, Close end, Open End, Flare End, Pointed End, and Radiation.

Fin Polish or Satin or Nickel Plated.

Qty: 1 to X amount (as per the customer's needs and requirements).

Types of tubes: Flare, Flat, Open, Radius, Close, Radiation, Pointed

Overview

Lead Nitrate (Pb(NO3)2) is a white, odorless crystalline solid with high water solubility and strong oxidizing properties. As a soluble lead salt, it serves as a key industrial raw material and chemical intermediate, widely applied in metallurgy, pigments, electroplating, and chemical synthesis. It is classified as a 5.1 oxidizer + 6.1 toxic substance for safe handling and transport.

Key Specifications
Chemical Formula: (Pb(NO3)2)
Molecular Weight: 331.2 g/mol
Appearance: White crystalline powder/granules
Purity: 98% min (industrial grade); 99.0%/99.9% (high purity)
Density: 4.53 g/cm (25 C)
Solubility: 343 g/L in water (20 C)
Melting Point: Decomposes at 470 C
pH (10% solution): 3.5-4.5

Applications
Metallurgy & Mining: Gold extraction (cyanidation process), ore flotation agent, and lead salt production.
Pigments & Coatings: Raw material for lead-based pigments, glass/enamel colorants, and corrosion-resistant coatings.
Electroplating & Surface Treatment: Lead plating solutions, metal surface passivation, and circuit board processing.
Chemical Industry: Oxidizing agent, raw material for lead compounds, and organic synthesis intermediate.
Other Uses: Textile dyeing mordant, photography sensitizer, and matches/explosives manufacturing.

Packaging & Storage
Packing: 25kg plastic-lined woven bags or sealed iron drums.
Storage: Keep in a cool, dry, ventilated warehouse; seal tightly and separate from organics, reducing agents, and food materials.
Transport: UN 1469 (Class 5.1+6.1); avoid friction, impact, and direct sunlight.

Company Profile
Shanghai Jianxin Chemical Co., Ltd, established in 2019 and located in Shanghai Jing'an District. An innovative enterprise, specialized in the R&D, production and sales of metalworking fluids and industrial lubricants. It has excellent R&D, management and sales service teams to solve the problems of lubrication, rust prevention, oxidation, odor and foam in the process of metal processing.
We provide solutions for adjusting metalworking fluids and industrial lubricants to address issues such as surface smoothness, scratches, short lifespan, and cleaning and cooling, striving to achieve optimal results in your machining.
Our company's service philosophy is "customers' needs is what we should do", striving to create a national brand in the fields of metalworking fluids and industrial lubricants

Lead, Zinc Ore from Nigeria

Steel tubes are hollow cylindrical or shaped steel products manufactured either by seamless or welded processes.

Material : Carbon Steel / Mild Steel / Stainless Steel
Types : Seamless / ERW / Welded / Galvanized
Shapes : Round / Square / Rectangular
Wall Thickness : 0.5 mm - 50 mm

Brand Name Custom
Model Number Lead battery Scrap
Pb Content (%) 99
Product name Lead battery Scrap
Packing Customet's Request
Origin USA
Grade A
Quality High Qualtiy
Purity 99 % Min

Our Acid Battery Scrap on 99.99%.
Monthly Supply Capacity: 500 - 1500 metric tons,
Type: all kind of scrap batteries,
Fe Content: HMS



Fe Content (%): 100%)
Drained Battery Scrap: Black
Packaging Detail: Pallet with shrink wrapping

Battery features:
- Sealed and maintenance free operation battery
- Non-Spillable construction design.
- ABS Containers and Covers (UL94HB), UL94V-0 optional.
- Safety valve installation for explosion proof.
- High quality and high reliability.
- Exceptional deep discharge recovery performance.
- Low self discharge characteristic.
- Flexibility design for multiple install positions.
- No memory effec
- CE certificate
- Wide operating temperature range

Battery Application:
-Solar system
- Alarm System
- Cable Television
- Communication Equipment
- Control Equipment
- Security System
- Medical Equipment
- UPS
- Power Tools
- Toys
- Emergency Power System
- LED Lig
WE ARE TRADING MANUFACTURERS OF ALL TYPES OF used car scrap battery
WORLDWIDE.
Specifications
we are offer
1.dry charged battery & MF battery
2.Meet all DIN & JIS standard
3.Powerful quick
scrap used a car battery
Specifications
Specifications
1.dry charged battery & MF battery
2.Meet all DIN & JIS standard
3.Powerful quick start & long life
4.1-2 year
used car scrap battery
2/Product Feature:
(1)Maintenance-free operation.there is no need to check specific
the gravity of the electrolyte or add water to a battery during float
service life.
(2)Low self-discharge rate, small internal resistance.
(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantees leakproof operation in and
position with no adverse effect on capacity or service life.
(4)With our high-quality lead-tin-calcium alloy grids, it has a long
usage life and deep discharge recoverability.
(5)No pollution and no harm.
Drained Lead Car Battery Scraps (Rains)
Drained Lead-Acid Battery Scrap (RAINS per ISRI

Product Description And Specification;

1. Dry charged battery & MF battery.

2. Meet all DIN & JIS standard.

3. Powerful quick scrap used car batter.

Product Feature;

(1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life.



(2)Low self-discharge rate, small internal resistance.



(3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life.



(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.



(5)No pollution and no harm.
Drained Lead Car Battery Scraps (Rains)

Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications).
Our Acid Battery Scrap on 99.99%.



Fe Content (%): 100%) Battery features;

- Sealed and maintenance free operation battery

- Non- Spill able construction design.

- ABS Containers and Covers (UL94HB), UL94V-0 optional.

- Safety valve installation for explosion proof.

- High quality and high reliability.

- Exceptional deep discharge recovery performance.

- Low self-discharge characteristic.

- Flexibility design for multiple install positions.

- No memory effect.

- CE certificate.

- Wide operating temperature range.



Battery Application;

-Solar system

- Alarm System

- Cable Television

- Communication Equipment

- Control Equipment
- Security System

- Medical Equipment â?? UPS
- Power Tools

- Toys

- Emergency Power System

- LED Lig

Laminated Tubes are multi player tubes with Aluminum/ Plastic barriers, known as ABL/PBL tubes used in multiple industry - Medicine, Cosmetics, FMCG, Lubricant, Foods and Sauces, and others.

Business Type Manufacturer, Exporter
Type Boiler Tubes
Material Steel
Shape Round

Length 4000-5000mm
Application Industrial Use
Product Code Bs3059
Port India

Tube Bending

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.



Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,

Content
Pb â?¥ 99.99 %

Density
11.34 g / cm 2

Color
Bluish

Weight
35 kgs / lump, 55 kgs / lump

Dimension
21" x 4" x 2.5"

Package
Standard Sea-worthy package, fixed by belt per ton

Shape
Rectangular Lump


Application

lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps

cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil

Container Size

20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter
40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter
40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

We operate in the supply of Quality Lead battery scrap

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products.


1.dry battery & MF battery
2.Meet all DIN & JIS standard
3.Powerful quick
scrap used car battery

MATERIAL : Drip Tube Bale

CATEGORY :Drip Tube

TYPE :Bales

SPECIFICATION :18 tons per load

5 loads ready

Origin in USA

LOADING WEIGHT : 18 Tons

CNF (USD/Ton) : $430-630 cnf Port klang west port or Laem chabang

$500 - 700 Jebel Ali

Length : 30 -45cm
Thickness : 2.5mm up
Moisture : 13.5% max

Consistent innovation, coupled with an alert understanding of customer?s needs & demands, makes us the most renowned manufacturer, exporter, trader and supplier of supreme grade Hydraulic Fitting such as Hydraulic Hose Metric Banjo, Metric O-ring Crimp Hose Fittings, Elbow Swaged Metric Fitting, Hydraulic Hose Fitting Coupling, Carbon Steel Fitting, Flat Seal Hose Fitting. This fitting is manufactured with the help of supreme grade metal and advanced techniques in adherence to set industry norms. Our offered fitting provided leak free solution to various pneumatic instruments. Clients can avail this fitting from us at market leading prices.

Finishing Polished
Color Metalic Grey
Material Grade JIS

Material Stainless Steel
Outer Diameter 20-25mm

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW WATER AND GAS ABSORPTION
TRANSPARENT TO LIGHT AND RAYS
NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE UPTO 200 Degree Celsius

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 1.0 TO 35.0 ID X 2.0 TO 38.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL & COLORED - 2.0 ID TO 100.0 ID ON REQUEST



PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 31 Mpa
Ultimate elongation - ASTM D638 - 305 %
Flexural modulus - ASTM D790 - 586 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 155
Hardness - ASTM D2240 - 57 Shore D
Coefficient of dynamic friction - 0.2
Melting point - 260 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
205 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 45KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 10 by 18 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID


TECHNICAL DATA SHEET

PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 24.5 Mpa
Ultimate elongation - ASTM D638 - 350 %
Flexural modulus - ASTM D790 - 490 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 107
Hardness - ASTM D2240 - 55 Shore D
Coefficient of dynamic friction - 0.1
Melting point - 327 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
260 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 24KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 1018 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum Square Tube is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name

Aluminum Square Tube

Price range

$1000-$2000 Discounts are available for large orders

Minimum order quantity

1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard

ASTM, JIS, DIN, GB,

Steel Grade

ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test

Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

Product

certification

ISO,SGS,BV,TUV,

Processing Service

Welding, Drilling, Cutting, Bending

Surface treatment

Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing

Wooden pallet or according to customer's request

Lead time

7 to 15 working days

Payment terms

T/T ,LC

Exporting country

Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

* ISO Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ISO Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storag :e

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* ASTM Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ASTM Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications : Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Can be cater made to suit requirement at Constructions ( Plumbing and Roofing), Foundation ( Shock observer), Copper Recovery Refineries, Ferrous Tank Linings and for Radiation protection ( Hospitals and Nuclear plants)

Drained Lead-Acid Battery Scrap

Drained lead acid Battery scrap for sale

Certified Clinical & Engineering Specifications

Indicated for enteral nutrition, stomach decompression, and oral drug administration

Biocompatible flexible PVC (Shore A80) with frosted low-friction outer finish

Embedded radiopaque lead balls in distal tip for immediate fluoroscopic placement confirmation

Four staggered lateral eyes to prevent occlusion and ensure continuous suction flow

Calibrated depth rings at 40, 50, 60, and 70 cm from the tip with or without adaptor

Export Packaging Standard
50 pcs/box 400 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 13485, Sterile EO

Sterilization / Cleanroom
ISO Class 7/8 100% EO Sterilized

Certified Clinical & Engineering Specifications

Thermosensitive transparent medical PVC contouring smoothly to airway anatomy

Features atraumatic rounded tip with Murphy Eye ensuring continuous bilateral ventilation

Continuous radiopaque X-ray line along full length with calibrated depth centimeter markings

Universal 15 mm standard connector compatible with all ventilators and anesthesia machines

High Volume Low Pressure (HVLP) cuff provides optimal tracheal seal without mucosal ischemia


Export Packaging Standard
10 pcs/box-100 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 5356-1, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

Certified Clinical & Engineering Specifications

Complete extracorporeal blood circuit comprising color-coded Arterial (Red) and Venous (Blue) lines

Precision-calibrated silicone pump segment compatible with major dialysis systems (Fresenius, Gambro, Nipro, Baxter, B.Braun)

Fitted with hydrophobic transducer protectors, heparin infusion line, drip chambers, and priming bag

Biocompatible non-DEHP medical PVC formulated to minimize hemolysis and thrombogenesis

100% Egyptian precision cleanroom extrusion, ultrasonic assembly, and EO sterilization

Export Packaging Standard
1 set/sterile pouch 24 sets/master ctn

Harmonized Tariff Code
HS 9018.90

Quality & Regulatory Marks
CE, ISO 8637-2, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

Lead Ore is a naturally occurring mineral containing lead-bearing minerals, primarily galena (PbS). It is an important raw material for the production of lead metal and lead-based industrial products. Commercial lead ore is generally supplied according to its lead (Pb) content, moisture level, mineral composition, and impurity profile. It is typically processed through crushing, grinding, concentration, and smelting/refining operations.

Zinc (Zn) : Buyer/specification dependent
Copper (Cu) : Buyer/specification dependent
Iron (Fe) : Controlled according to grade
Silver (Ag) : May be present as a valuable associated metal

Key Advantages
High lead-bearing mineral content
Suitable feedstock for lead smelters and refineries
Can contain commercially valuable silver and other associated minerals
Available in different grades and particle sizes

Origin:United States

Code: 2025787BN

Material: LDPE Drip Tube Black

Category: LDPE

Type: Drip Tube

Color: Black

Quantity: 68 Tons

Loading weight: 17 Tons

Specification:"LDPE Drip Tube Black

Yield rate about 70% plus

Available 4 loads"

Thanks for contacting us!

We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading

Could you please give us more details about your company and demand for us to offer you the suitable material?



1.What is your company name and address?

2.Have you imported this material before?

3.If yes, which is your port of destination and HS code which you use to import this material?

4.How many tons do you need per month?

5.Which grade and color are you looking for?

6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Code 52110: For surgical wound drainage

Features
Nature rubber formation.

Non-sterile.

Smooth tubing wall, both outside & inside.

X-ray opaque, ready to implant.

Peel apart package.

Length : 18(12 is also available)

Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1

- Packaging: Vacuum Pack, Bag
- Shape ; Sliced
- Specification: 10g up
- Shelf Life: 24 months
- Ingredients : 100% basa fish maw
- Content : Fish maw
- Weight (kg): 10
- Additives: None
- Freezing Process : IQF
- Max. Moisture (%): 5%

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world

Storage Type: Clean and cool place

Shelf life: 24 months

Part: Fish maw

Style: Dried

Packing: By bag or carton

Specifications

Shape: Butterfly shape and Tube shape

Quantity: 24 - 27 Pcs/1kg

Shelf life: 12 months

Other Information

- Fish maw is dried under sunshine

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world

Storage Type: Dried Place

Specification: Dried fish maw

Shelf life: 12 months

Instruction for use: For Food

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Storage Type: Clean and cool place
Shelf life: 24 months
Part: Fish maw
Style: Dried
Packing: By bag or carton

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Storage Type: Clean and cool place
Shelf life: 24 months
Part: Fish maw
Style: Dried
Packing: By bag or carton

Specifications
Shape
Butterfly shape and Tube shape
Quantity
24 - 27 Pcs/1kg
Shelf life
12 months
Other Information
- Fish maw is dried under sunshine
- No unknown smell

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world

Storage Type: Dried Place

Specification: Dried fish maw

Shelf life: 12 months

Instruction for use: For Food

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Storage Type: Dried Place
Specification: Dried fish maw
Shelf life: 12 months
Instruction for use: For Food

Warmest greeting from HUVY IMPORT EXPORT CO., LTD. We are one of the leading companies specializes in fresh fruit to many countries in the world. We always try our best the offer the best quality with the most competive prices to our customer. Long term cooperative is our company purpose
SPECIFICATION:
Type: BAKED TUBE FISH MAW
Manufacturer: Viet Nam
Ingredients: 100% dried and natural fish maw, no chemical
Color: Light Yellow
Feature: Low-Fat, Organic, Vitamins, NATURE, Nutritious
Material: 100% Natural Fish Air Bladder
Type: Fried with Oil, Fried without Oil, Baked
Shape: Piece, Big Tubular, Small Tubular
Instruction for use: cook
Size (cm): 5-10 cm, 10-20 cm, 20-30 cm/piece

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Origin : VIET NAM
Length: 26-32 cm - Packing : 6kgs/ bag or depend on customers' request .
Fish maw contains rich proteins and nutrients such as phosphor and calcium. It nourishes 'yin', replenishes kidney and boosts stamina. It is effective in healing weak lung and kidney, anemia, etc Our product has been exporting to many countries in the world such us: Malaysia, singapore, Hong Kong..

Innovative technology of pre-materials suitable for gas springs
welded and drawn according to ASTM A213
various ID tolerance requirement of H8, H9, H10 and H11
surface roughness below 15RA (0.40 �¼m)
mechanical properties are controlled to endure excessive stress
hardness, tensile strength, yield strength and elongation
servicing high precision pneumatic cylinder applications

ODï¼?mm) ID(mm) WT(mm) ID Tolerances,+0/-0.05) Specifications Materials Surface Finish(max)
15.0 13.0 1.0 CGS-031,H9 A213
SAE1010/#10;

SEA1020/#20

;Q235;

304L;316L

ID < 20 RA <0.4um
18.0 16.0 1.0 A269 OD < 32 RA <0.8um
19.0 17.0 1.0
19.0 16.0 1.5 CGS-021,H10 A213 ID < 20 RA <0.4um
22.0 19.0 1.5 A269 OD < 32 RA <0.8um
27.0 24.0 1.5
28.0 24.0 2.0 CGS-011,H11 ID < 20 RA <0.4um
30.0 25.0 2.5 A213 OD < 32 RA <0.8um
32.0 29.0 1.5 A269
32.0 28.0 2.0
40.0 36.0 2.0
40.0 35.0 2.5
44.0 40.0 2.0
50.0 45.0 2.5