Find Verified Nickel Tubes Suppliers, Manufacturers and Wholesalers

Cupro Nickel Tubes 95/5, 90/10 & 70/30 Marine Application :

These Cupro Nickel tubes & pipes for Marine application are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.

Cupro Nickel Tubes 95/5, 90/10 & 70/30 Automobile Industries :

he Move toCopper-Nickel Tubing

Copper had been provedsince the early days to have many good attributes. It was easy to bend and hadvery high corrosion resistance, but there was concern about its lowcorrosion-fatigue strength. When copper-nickel was introduced, it displayedcorrosion resistance similar to copper, higher general strength and betterfatigue strength. Good formability allows ease of flaring and bending, andalthough the metal cost is greater than that of steel alternatives,copper-nickel is very attractive in view of its extra life, trouble-freeinstallation and safety/reliability characteristics.



Properties ofCopper-Nickel Brake Tubing

The copper-nickelalloy used for brake tubing typically contains 10% nickel, with iron andmanganese additions of 1.4% and 0.8% respectively. The product conforms to ASTMB466 (American Society for Testing and Materials), which specifies dimensions,tensile strength and yield strength. Formability and internal cleanlinessconform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturersand Traders). Also, the alloy meets the requirements for pressure containment,fabrication and corrosion resistance for ISO 4038 (International StandardsOrganization) and SAE J1047.

The mechanicalproperties of alloy C70600 in comparison with steel and copper are shown inspecification.



Alloy C70600 isnormally supplied as redrawn tubing in the annealed condition. The combinationof strength and good ductility give excellent formability.

As copper-nickel issofter than steel, it was first feared that fretting might be a problem.Experience has shown this is not the case.

Copper-nickel braketubing provides superior reliability and assures both manufacturers and vehicleowners improved durability for effective long-life functioning of the brakesystem.

Length - 200-300mm
Application - Gas Supplying
Grade - 200
Color - Grey
Condition - New
Finishing - Polished

200 Nickel Tube, Finishing : Polished
Color - Grey
Length - 200-300mm
Grade - 200
Product Supply Type - Manufacturer, Exporters, Suppliers, Importer, Trader

Products Detail
Grade - 200
Condition - New
Length - 200-300mm
Finishing - Polished
Application - Gas Supplying
Color - Grey

Standards
ASTM / ASME B161, B725, B730 / SB161, SB725, SB730


Outer Diameter
6.00 mm OD up to 914.4 mm OD, Sizes up to 24 NB


Thickness
0.3mm - 50 mm


Type
Seamless / ERW / Welded Pipes


Schedule
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS


Seamless Pipes & Tubes Size
1 / 8 NB 24 NB


ERW Pipes & Tubes Size
1 / 8 NB 36 NB


Length
Single Random, Double Random & Required Length


End
Plain End, Beveled End, Treaded

Material - Nickel
Shape - Round
Length - 400-500mm
Application - Gas Supplying, Heating Fabricators
Grade - 201
Color - Grey
Finishing - Polished

Length - 300-400mm
Application - Heating Fabricators
Grade - DIN, GB, JIS
Condition - New
Finishing - Polished
Dimensions - 90-100mm

Finishing - Polished
Length - 400-500mm
Grade - 201
Product Supply Type - Manufacturer, Exporters, Suppliers, Importer, Trader

Products Detail
Shape - Round
Material - Nickel
Length - 400-500mm
Application - Gas Supplying, Heating Fabricators
Finishing - Polished
Color - Grey
Grade - 201

Nickel Alloy Tubes, Application : Heating Fabricators
Grade - DIN, GB, JIS
Dimensions - 90-100mm
Length - 300-40 0mm
Product Supply Type - Manufacturer, Exporters, Suppliers,

Products Detail
Condition - New
Dimensions - 90-100mm
Finishing - Polished
Application - Heating Fabricators
Grade - DIN, GB, JIS
Length - 300-400mm

We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity

Refined nickel metal (99.8%99.9% Ni, LME / ASTM B39) for batteries, alloys, and stainless steel.
Offers superior corrosion resistance (Industrial-Grade Refining).

We supply copper nickel material with purity combination of 90:10 and 70:30

We supply following copper nickel material -

Copper Nickel Pipe
Copper Nickel Tubes
Copper Nickel Pipe Bend
Copper Nickel Forged Fitting
Cupro Nickel Round Bar
Copper Nickel Wire
DIN 17664

For price specifications and more details please contact us

* We are one of the prime manufacturers of Nickel Alloy Pipes and Tubes that are being sourced by using high quality of raw material and makes sure to provide durability of highest quality of industry standard products. Nickel Alloy or super alloys or High performance alloys are highly superior combination of high temperature corrosion resistance, toughness, heat resistance and heat strength and for the most demanding applications.

* These Nickel Alloy Seamless Pipe, Seamless Tubes used in Machined Components, Valves, Machine tools, Pump Shafts, line pipe, oil & gas industry, Dairy Equipments and Surgical & Medical Parts.

Features:
Good Mechanical strength and better resistance at high temperatures.
Excellent surface stability
Available in various grades
Oxidant and Corrosion resistant
Standards : ASTM / ASME
Grade :Nickel Alloy 200 (UNS No. N02200) Pipes & Tubes, 2.4060, 2.4066
Nickel 200 Seamless Pipes & Tubes: 161 / 163,B 161 / B 163
Nickel 200 Welded Pipes & Tubes: 725 / 730, B 725 / B730
Size : 4 to 219mm W. T.: 0.5 to 20mm
Length : Within 13500mm

We make "CUSTOM" tubes as per the customer's needs and requirements (Engg. drawing or Sample or Sketch).
Material Test Reports (MTRs) are provided with every supply.

Mill Test Reports are provided as per the customer's needs and requirements.


Material:
Stainless Steel, Brass, Aluminium, Copper, Inconel, and others.

Type: Flat end, Radius, Close end, Open End, Flare End, Pointed End, and Radiation.

Fin Polish or Satin or Nickel Plated.

Qty: 1 to X amount (as per the customer's needs and requirements).

Types of tubes: Flare, Flat, Open, Radius, Close, Radiation, Pointed

Nickel Sheets & Cathodes High-Purity Nickel for Industrial Applications

Our nickel sheets and cathodes are refined nickel products produced to high purity standards, typically meeting or exceeding 99.8% nickel content. These materials are essential in a wide range of industries due to their excellent corrosion resistance, heat stability, and strong mechanical properties.

Nickel cathodes are primarily used as raw material in stainless steel, alloy, and battery production, while nickel sheets are widely used in fabrication, plating, and chemical processing equipment. Their consistent quality ensures efficient melting, forming, and industrial performance.

Key Features:

High-purity nickel (â?¥ 99.8% Ni content)
Available in cathodes (for remelting) and sheets (for fabrication)
Excellent resistance to corrosion, oxidation, and high temperatures
Uniform chemical composition for reliable industrial use
Suitable for stainless steel, superalloys, and battery manufacturing
Ideal for chemical processing, marine, and aerospace applications
Smooth surface finish for easy handling and processing
Available in various sizes, thicknesses, and forms
Supplied in bulk for wholesale and export supply
Manufactured to meet international quality standards

Steel tubes are hollow cylindrical or shaped steel products manufactured either by seamless or welded processes.

Material : Carbon Steel / Mild Steel / Stainless Steel
Types : Seamless / ERW / Welded / Galvanized
Shapes : Round / Square / Rectangular
Wall Thickness : 0.5 mm - 50 mm

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Nickel Wire

NP1
*Purity*: 99.9799 - 99.9839

*Diameter*: 0.025 mm

*Origin*: Czech Republic

*Current Location*: Dubai

*Storage Location*: Etihad Secure Logistics

*Quantity*: 38.2 million meters, packed in 18 secure boxes

*Monthly Production*:

60 million meters

*Price*: Depends on quantity

*Minimum Order Quantity*: 5 million meters. 2: Transaction Process: Steps

1. Letter of Intent (LOI) on company letterhead

2. We will reply with a Formal Order of Contribution (FCO) containing all documents

3. Buyer submits Internal Request for Quotation (ICPO), and we will arrange inspection

4. We submit a commercial invoice

5. Buyer pays the purchase price; ownership transfers to the buyer upon receipt of payment.

6. Once the transfer of ownership is complete, the buyer authorizes us to ship the nickel wire to the new owner, as ownership of SKR now belongs to them. We will arrange shipment to the nearest airport. 3. Price: The minimum order quantity is 5 million meters, and the price is US$22.5 meter; this is the CIF price.

Laminated Tubes are multi player tubes with Aluminum/ Plastic barriers, known as ABL/PBL tubes used in multiple industry - Medicine, Cosmetics, FMCG, Lubricant, Foods and Sauces, and others.

Business Type Manufacturer, Exporter
Type Boiler Tubes
Material Steel
Shape Round

Length 4000-5000mm
Application Industrial Use
Product Code Bs3059
Port India

Tube Bending

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

High Nickel Alloy Feed Pipes are high-performance piping components designed for demanding applications involving elevated temperatures, high pressures, and corrosive operating environments. Manufactured from nickel-rich alloys, these feed pipes offer excellent mechanical strength, oxidation resistance, corrosion resistance, and resistance to pitting, crevice corrosion, and chloride stress corrosion cracking.

Stainless Steel Impex manufactures, supplies, exports, and stocks High Nickel Alloy Feed Pipes in different grades, dimensions, wall thicknesses, and configurations according to customer requirements and applicable standards. These pipes are suitable for reactors, vessels, condensers, heat-transfer systems, petrochemical equipment, and other industrial applications where reliable performance is essential.

The pipes can be supplied in air feed and column feed configurations and are available in hot-rolled and other manufacturing conditions. They offer good weldability, toughness, durability, and workability, making them suitable for demanding industrial environments. Quality inspection and testing are carried out to ensure dimensional accuracy, material integrity, and dependable service performance.

High Nickel Alloy Feed Pipes Types

â?¢ High Nickel Alloy Air Feed Pipe
â?¢ High Nickel Alloy Column Feed Pipe

Specifications: ASTM A106 / ASME SA106

Outer Diameters: Ranging from 31.8 mm to 711 mm

Wall Thicknesses: From 2.3 mm to 100 mm

Nickel Wire diameter 0.025 mm
Description: Nickel Wire is a cold-formed, round, normal manufacturing accuracy, in a solid state metal thread, with a diameter of 0.025 mm, supplied on a reel.
Packaging: The Nickel Wire we offer is supplied on spools in transparent containers with net weight of 136 grams. The packaging ensures the safety of the wire during storage and transportation.
1 kg of wire with a diameter of 0.025 mm contains - 227272 linear meters.
Quality Grade:
Purity grade 1: Ni at least 99.9% - 99.98%
HS code: 7505210000
Certification:
Chemical composition of Nickel Wire is certified by the IGAS RESEARCH laboratory, Germany. The chemical purity is measured with Inductively Coupled Plasma Optical Emission spectroscopy.
QUANTITY: 1.0 kg â?? 20.0 kg
MOQ: 1.0 kg.
Price: upon request.
Delivery: FOT Germany or Hungary. Air freight is available. We offer flexible shipping options to meet your specific needs.
Payment: bank transfer in advance against the invoice

The cost of the goods is directly affected by the purchase volume. Please contact us to get the best prices depending on the quantity requested.
Please provide us a Letter of Intent (LOI) mentioning the quantity of the product and target price, Proof of Funds (POF) in form of a Bank Comfort Letter (BCL).

Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite.
On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens.
Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials,
Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.

MATERIAL : Drip Tube Bale

CATEGORY :Drip Tube

TYPE :Bales

SPECIFICATION :18 tons per load

5 loads ready

Origin in USA

LOADING WEIGHT : 18 Tons

CNF (USD/Ton) : $430-630 cnf Port klang west port or Laem chabang

$500 - 700 Jebel Ali

Length : 30 -45cm
Thickness : 2.5mm up
Moisture : 13.5% max

Consistent innovation, coupled with an alert understanding of customer?s needs & demands, makes us the most renowned manufacturer, exporter, trader and supplier of supreme grade Hydraulic Fitting such as Hydraulic Hose Metric Banjo, Metric O-ring Crimp Hose Fittings, Elbow Swaged Metric Fitting, Hydraulic Hose Fitting Coupling, Carbon Steel Fitting, Flat Seal Hose Fitting. This fitting is manufactured with the help of supreme grade metal and advanced techniques in adherence to set industry norms. Our offered fitting provided leak free solution to various pneumatic instruments. Clients can avail this fitting from us at market leading prices.

Finishing Polished
Color Metalic Grey
Material Grade JIS

Material Stainless Steel
Outer Diameter 20-25mm

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW WATER AND GAS ABSORPTION
TRANSPARENT TO LIGHT AND RAYS
NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE UPTO 200 Degree Celsius

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 1.0 TO 35.0 ID X 2.0 TO 38.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL & COLORED - 2.0 ID TO 100.0 ID ON REQUEST



PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 31 Mpa
Ultimate elongation - ASTM D638 - 305 %
Flexural modulus - ASTM D790 - 586 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 155
Hardness - ASTM D2240 - 57 Shore D
Coefficient of dynamic friction - 0.2
Melting point - 260 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
205 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 45KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 10 by 18 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID


TECHNICAL DATA SHEET

PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 24.5 Mpa
Ultimate elongation - ASTM D638 - 350 %
Flexural modulus - ASTM D790 - 490 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 107
Hardness - ASTM D2240 - 55 Shore D
Coefficient of dynamic friction - 0.1
Melting point - 327 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
260 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 24KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 1018 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum Square Tube is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name

Aluminum Square Tube

Price range

$1000-$2000 Discounts are available for large orders

Minimum order quantity

1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard

ASTM, JIS, DIN, GB,

Steel Grade

ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test

Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

Product

certification

ISO,SGS,BV,TUV,

Processing Service

Welding, Drilling, Cutting, Bending

Surface treatment

Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing

Wooden pallet or according to customer's request

Lead time

7 to 15 working days

Payment terms

T/T ,LC

Exporting country

Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

* ISO Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ISO Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storag :e

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* ASTM Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ASTM Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications : Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Certified Clinical & Engineering Specifications

Indicated for enteral nutrition, stomach decompression, and oral drug administration

Biocompatible flexible PVC (Shore A80) with frosted low-friction outer finish

Embedded radiopaque lead balls in distal tip for immediate fluoroscopic placement confirmation

Four staggered lateral eyes to prevent occlusion and ensure continuous suction flow

Calibrated depth rings at 40, 50, 60, and 70 cm from the tip with or without adaptor

Export Packaging Standard
50 pcs/box 400 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 13485, Sterile EO

Sterilization / Cleanroom
ISO Class 7/8 100% EO Sterilized

Certified Clinical & Engineering Specifications

Thermosensitive transparent medical PVC contouring smoothly to airway anatomy

Features atraumatic rounded tip with Murphy Eye ensuring continuous bilateral ventilation

Continuous radiopaque X-ray line along full length with calibrated depth centimeter markings

Universal 15 mm standard connector compatible with all ventilators and anesthesia machines

High Volume Low Pressure (HVLP) cuff provides optimal tracheal seal without mucosal ischemia


Export Packaging Standard
10 pcs/box-100 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 5356-1, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

Certified Clinical & Engineering Specifications

Complete extracorporeal blood circuit comprising color-coded Arterial (Red) and Venous (Blue) lines

Precision-calibrated silicone pump segment compatible with major dialysis systems (Fresenius, Gambro, Nipro, Baxter, B.Braun)

Fitted with hydrophobic transducer protectors, heparin infusion line, drip chambers, and priming bag

Biocompatible non-DEHP medical PVC formulated to minimize hemolysis and thrombogenesis

100% Egyptian precision cleanroom extrusion, ultrasonic assembly, and EO sterilization

Export Packaging Standard
1 set/sterile pouch 24 sets/master ctn

Harmonized Tariff Code
HS 9018.90

Quality & Regulatory Marks
CE, ISO 8637-2, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

**Title:** Nickel Alloy Scrap for Sale

High Grade Industrial Metal Scrap

**Description:**
We supply high-quality Nickel Alloy Scrap sourced from industrial and manufacturing residues. The material is carefully sorted and graded to ensure consistent composition, making it suitable for recycling and metal recovery processes.

**Product Details:**

* Product: Nickel Alloy Scrap
* Type: Inconel / Monel / Stainless Nickel Alloys (as available)
* Form: Sheets / Turnings / Offcuts / Solid Scrap
* Quality: Industrial grade / Recyclable material
* Origin: Available on request

**Applications:**

* Metal recycling and refining
* Stainless steel production
* Alloy manufacturing
* Industrial remelting processes

**Key Features:**
High nickel content material
Sorted and quality-checked scrap
Suitable for smelting and recovery
Consistent industrial supply

**Packaging:** Bundled / Drums / Loose bulk loading
**Minimum Order Quantity (MOQ):** Negotiable (bulk supply available)
**Price:** Competitive- Contact for quotation

**Contact:**
Serious buyers and direct scrap processors only. Message us for analysis reports, photos, and pricing details.

Nickel Scrap High-Grade Alloy Metal for Industrial Recycling

Our nickel scrap consists of high-quality nickel-bearing materials sourced from industrial components, alloys, plating residues, batteries, and manufacturing waste. Known for its strength, corrosion resistance, and heat resistance, nickel is widely used in stainless steel production, superalloys, and specialized industrial applications.

The scrap is carefully sorted and processed to ensure minimal contamination and consistent composition. Nickel scrap is commonly used in smelting and refining processes to produce new nickel alloys and stainless steel products, making it a valuable raw material for the metallurgical industry.

Key Features:

High-quality nickel-containing scrap
Sourced from industrial alloys, plating, and manufacturing waste
Cleaned and sorted to reduce impurities and non-metal contaminants
Excellent corrosion and heat resistance properties
Suitable for remelting and alloy production
Widely used in stainless steel and superalloy manufacturing
Consistent material for efficient recycling and processing
Available in bulk for wholesale and export supply
Carefully handled to maintain composition and material value

Origin:United States

Code: 2025787BN

Material: LDPE Drip Tube Black

Category: LDPE

Type: Drip Tube

Color: Black

Quantity: 68 Tons

Loading weight: 17 Tons

Specification:"LDPE Drip Tube Black

Yield rate about 70% plus

Available 4 loads"

Thanks for contacting us!

We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading

Could you please give us more details about your company and demand for us to offer you the suitable material?



1.What is your company name and address?

2.Have you imported this material before?

3.If yes, which is your port of destination and HS code which you use to import this material?

4.How many tons do you need per month?

5.Which grade and color are you looking for?

6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Code 52110: For surgical wound drainage

Features
Nature rubber formation.

Non-sterile.

Smooth tubing wall, both outside & inside.

X-ray opaque, ready to implant.

Peel apart package.

Length : 18(12 is also available)

Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1

- Packaging: Vacuum Pack, Bag
- Shape ; Sliced
- Specification: 10g up
- Shelf Life: 24 months
- Ingredients : 100% basa fish maw
- Content : Fish maw
- Weight (kg): 10
- Additives: None
- Freezing Process : IQF
- Max. Moisture (%): 5%

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world

Storage Type: Clean and cool place

Shelf life: 24 months

Part: Fish maw

Style: Dried

Packing: By bag or carton

Specifications

Shape: Butterfly shape and Tube shape

Quantity: 24 - 27 Pcs/1kg

Shelf life: 12 months

Other Information

- Fish maw is dried under sunshine

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world

Storage Type: Dried Place

Specification: Dried fish maw

Shelf life: 12 months

Instruction for use: For Food

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Storage Type: Clean and cool place
Shelf life: 24 months
Part: Fish maw
Style: Dried
Packing: By bag or carton

Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world
Storage Type: Clean and cool place
Shelf life: 24 months
Part: Fish maw
Style: Dried
Packing: By bag or carton