Find Verified Iron Tubes Suppliers, Manufacturers and Wholesalers

Material - Galvanized Iron
Thickness - 9-12mm
Application - Grounding, Industrial, Residential
Grade - AISI, ASTM
Condition - New
Surface Treatment - Hot-dipped Galvanized, Zinc Coated

Cast Iron and Ductile Iron tube and fittings PL739

Cast Iron and Ductile Iron tube and fittings can be offered by our comapny to meet different engineering needs.

The difference between ductile iron and gray iron

1. Different chemical composition

Nodular cast iron contains nodular graphite, which can improve its toughness and strength, while reducing brittleness. Gray cast iron contains a lot of carbon, so that its hardness and wear resistance is high, but the toughness is poor.

2. Different organizational structures

The structure of nodular cast iron contains nodular and ferrite, and the distribution of nodular is uniform. While the structure of gray cast iron is mainly ferrite and pearlite, and the distribution of pearlite is uneven.

3. Different performance

Ductile iron has high strength and toughness, and has good corrosion resistance. It is uitable for the manufacture of high load and high pressure parts. The hardness and wear resistance of gray cast iron are high. It is suitable for the manufacture of friction and wear parts.

Application field
Cast iron : because of its low strength and good vibration resistance. It is often used in the production of parts under compressive stress, such as box, base, etc.
Ductile iron : because of its high strength and good toughness. It is often used in the manufacture of parts requiring high strength and toughness, such as crankshaft, connecting rod and so on.

We make "CUSTOM" tubes as per the customer's needs and requirements (Engg. drawing or Sample or Sketch).
Material Test Reports (MTRs) are provided with every supply.

Mill Test Reports are provided as per the customer's needs and requirements.


Material:
Stainless Steel, Brass, Aluminium, Copper, Inconel, and others.

Type: Flat end, Radius, Close end, Open End, Flare End, Pointed End, and Radiation.

Fin Polish or Satin or Nickel Plated.

Qty: 1 to X amount (as per the customer's needs and requirements).

Types of tubes: Flare, Flat, Open, Radius, Close, Radiation, Pointed

We have a unique iron ore resource footprint with large, high-quality resource bases in South Africa and India. Demand for iron ore globally is largely dependent on the state of the steel industry worldwide and, more specifically, on that of the steel manufacturing sector in China. Brat supplies leading quality lump ore and also produces premium fine ore from the mines of its associate company in Goa, India.

Steel tubes are hollow cylindrical or shaped steel products manufactured either by seamless or welded processes.

Material : Carbon Steel / Mild Steel / Stainless Steel
Types : Seamless / ERW / Welded / Galvanized
Shapes : Round / Square / Rectangular
Wall Thickness : 0.5 mm - 50 mm

Iron Ore (Fe) Purity Grades: 52%, 58%, 62%, 65%

As a vital raw material for steel manufacturing, infrastructure, and industrial development, our iron ore is available in multiple purity grades to meet diverse operational needs:

High-Grade (62% & 65%): Perfect for premium steel production, ensuring superior strength and quality.

Standard-Grade (52% & 58%): Cost-effective options for bulk steel manufacturing, optimizing value without compromising performance.

High-grade iron ore sourced from reliable mines, suitable for steel production with consistent quality and bulk supply capability.

High-quality Iron Ore available for steel manufacturing and industrial applications. Our iron ore is sourced from reliable mines and processed to meet international export standards. Available in both lumps and fines with Fe content ranging from 58% to 65%, ensuring excellent metallurgical performance. The product features low impurities, consistent chemical composition, and high iron concentration, making it suitable for blast furnaces, direct reduction plants, and sintering operations.

The material is carefully screened, graded, and quality tested before shipment to guarantee customer satisfaction and compliance with international specifications.

Laminated Tubes are multi player tubes with Aluminum/ Plastic barriers, known as ABL/PBL tubes used in multiple industry - Medicine, Cosmetics, FMCG, Lubricant, Foods and Sauces, and others.

Business Type Manufacturer, Exporter
Type Boiler Tubes
Material Steel
Shape Round

Length 4000-5000mm
Application Industrial Use
Product Code Bs3059
Port India

Tube Bending

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Iron Wood products is still needed throughout the world, it can have significant impact on price increases.
We provide this Iron Wood on an ongoing basis and can serve exports to your country.

With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe.

With our full support we help you become an importer of the products we sell.

Smart Home Appliances- Irons
Cordless Iron
OEI-687 CL DX
Pink

? 1200W Power
? Cordless Steam / Spray / Dry Ironing
? German Grade Non Stick Coated Sole Plate
? Cast In Sole Plate Technology For Faster and Uniform
Heating
? Thermostat for Variable Temperature Control with Power Indicator
? Thermal Fuse for Over Heat Safety Protection
? Drip Stop Technology
? Shock Proof Plastic Body
? Cool Touch Body with Comfortable Handle Grip
? Button Groove: Reaches into Tricky

Smart Home Appliances
Irons
Cordless Iron
OEI-687
CL DX Green

1200W Power
Cordless Steam / Spray / Dry Ironing
German Grade Non Stick Coated Sole Plate
Cast In Sole Plate Technology For Faster and Uniform
Heating
Thermostat for Variable Temperature Control with Power Indicator
Thermal Fuse for Over Heat Safety Protection
Drip Stop Technology
Shock Proof Plastic Body
Cool Touch Body with Comfortable Handle Grip
Button Groove: Reaches into Tricky

Smart Home Appliances
Irons
Cordless Iron
OEI-687
CL DX – Blue

? 1200W Power
? Cordless Steam / Spray / Dry Ironing
? German Grade Non Stick Coated Sole Plate
? Cast In Sole Plate Technology For Faster and Uniform
Heating
? Thermostat for Variable Temperature Control with Power Indicator
? Thermal Fuse for Over Heat Safety Protection
? Drip Stop Technology
? Shock Proof Plastic Body
? Cool Touch Body with Comfortable Handle Grip
? Button Groove: Reaches into Tricky

Smart Home Appliances
Irons
Cordless Iron
OEI-687
CL DX
Pista Green

? 1200W Power
? Cordless Steam / Spray / Dry Ironing
? German Grade Non Stick Coated Sole Plate
? Cast In Sole Plate Technology For Faster and Uniform
Heating
? Thermostat for Variable Temperature Control with Power Indicator
? Thermal Fuse for Over Heat Safety Protection
? Drip Stop Technology
? Shock Proof Plastic Body
? Cool Touch Body with Comfortable Handle Grip
? Button Groove: Reaches into Tricky

OEI - 707

1900 Watts Power
Steam / Burst / Spray Ironing
German Grade Non Stick Coated Sole Plate
Cast In Sole Plate Technology for Faster and Uniform Heating
Button Groove: Reaches into Tricky Areas
Adjustable Steam Control
Drip stop technology keeps your garments spotless while ironing
Continuous steam upto 30gm per minute for better crease removal
Triple precision tip for optimal

Model NO : OEI - 717 TC

1400 Watts Power
Steam / Burst / Spray Ironing
German Grade Non Stick Coated Sole Plate
Cast In Sole Plate Technology for Faster and Uniform Heating
Button Groove: Reaches into Tricky Areas
Adjustable Steam Control
Thermostat for Variable Temperature Control
Thermal Fuse for Over Heat Safety Protection
Shock Proof Plastic Body
Silk Braided
360 degree Swivel Cord for Easy

OEI - 607

1100 Watts Power
Steam / Dry Ironing
German Grade Non Stick Coated Sole Plate
Cast In Sole Plate Technology for Faster and Uniform Heating
Thermostat for Variable Temperature Control
Thermal Fuse for Over Heat Safety Protection
Shock Proof Plastic Body
Cool Touch Body with Comfortable Handle Grip
Button Groove: Reaches into Tricky Areas
Silk Braided 180 degree swivel Power

Pig Iron comprises three main types: Basic Pig Iron, Foundry Pig Iron and Nuclear Pig iron. We supply compositions within fairly narrow ranges of specifications with the objective of optimizing customer's costs

Moisture : 6% - 12%
Loss on Ignition (LOI) : As specified by buyer
Form : Fines, lumps, pellets, concentrates
Color : Dark red, reddish-brown, black
Bulk Density ; 2.0 - 3.5 MT/m
Particle Size (Fines) : Below 10 mm
Particle Size (Lumps) : 6 - 40 mm
Moisture : As per contract specification

We can supply the Iron Ore (min. 62%) from Mexico, and Venezuela (63.5%)
Please send me your LOI with detail information (quantity, target price, etc..)
The price term is depending on the quantity.
FOB is $83.00/MT major port in Mexico, and $73.00/MT major port in Venezuela
We have been doing this business since 1982 in NY, USA.

Cast iron scrap available for immediate export

Bulk Quantity Steel iron scrap

Type: Cast Iron Scrap
Fe Content: Mixed
Weight: 20 Tons
Fe Content (%): 99
Iron Scrap: Grade AA+
High purity iron scrap: aa
Packaging Details: on buyers request
Delivery Detail: Shipped in 10 days after payment

Category Type of scrap Note
1 �«A�» Lump cut-off with a thickness of â?¥6, a mass of 0.5-40, which is subjected to remelting The exception is wire
2 �«A�» and �«B�» Waste in chunks, ingots This includes shaped rolled products, pipes and ingots that have been written off

Uniform, high-density iron ore pellets designed for efficient steel manufacturing, ensuring better performance and reduced impurities.

We are offering a wide range of cast Iron Powder. Our offered cast iron powder is processed in line with global quality standards using the best quality basic chemicals at customer end. Tested on an assortment of parameters set by the industry, these are broadly demanded all across the globe.

MATERIAL : Drip Tube Bale

CATEGORY :Drip Tube

TYPE :Bales

SPECIFICATION :18 tons per load

5 loads ready

Origin in USA

LOADING WEIGHT : 18 Tons

CNF (USD/Ton) : $430-630 cnf Port klang west port or Laem chabang

$500 - 700 Jebel Ali

Length : 30 -45cm
Thickness : 2.5mm up
Moisture : 13.5% max

Consistent innovation, coupled with an alert understanding of customer?s needs & demands, makes us the most renowned manufacturer, exporter, trader and supplier of supreme grade Hydraulic Fitting such as Hydraulic Hose Metric Banjo, Metric O-ring Crimp Hose Fittings, Elbow Swaged Metric Fitting, Hydraulic Hose Fitting Coupling, Carbon Steel Fitting, Flat Seal Hose Fitting. This fitting is manufactured with the help of supreme grade metal and advanced techniques in adherence to set industry norms. Our offered fitting provided leak free solution to various pneumatic instruments. Clients can avail this fitting from us at market leading prices.

Finishing Polished
Color Metalic Grey
Material Grade JIS

Material Stainless Steel
Outer Diameter 20-25mm

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW WATER AND GAS ABSORPTION
TRANSPARENT TO LIGHT AND RAYS
NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE UPTO 200 Degree Celsius

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 1.0 TO 35.0 ID X 2.0 TO 38.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL & COLORED - 2.0 ID TO 100.0 ID ON REQUEST



PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 31 Mpa
Ultimate elongation - ASTM D638 - 305 %
Flexural modulus - ASTM D790 - 586 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 155
Hardness - ASTM D2240 - 57 Shore D
Coefficient of dynamic friction - 0.2
Melting point - 260 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
205 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 45KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 10 by 18 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID


TECHNICAL DATA SHEET

PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 24.5 Mpa
Ultimate elongation - ASTM D638 - 350 %
Flexural modulus - ASTM D790 - 490 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 107
Hardness - ASTM D2240 - 55 Shore D
Coefficient of dynamic friction - 0.1
Melting point - 327 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
260 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 24KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 1018 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Aluminum Square Tube is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name

Aluminum Square Tube

Price range

$1000-$2000 Discounts are available for large orders

Minimum order quantity

1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard

ASTM, JIS, DIN, GB,

Steel Grade

ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test

Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

Product

certification

ISO,SGS,BV,TUV,

Processing Service

Welding, Drilling, Cutting, Bending

Surface treatment

Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing

Wooden pallet or according to customer's request

Lead time

7 to 15 working days

Payment terms

T/T ,LC

Exporting country

Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

* ISO Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ISO Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storag :e

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* ASTM Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ASTM Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications : Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

This by-product derives from the iron industries and its a valuable material for melting and manufacturing of ferrock for construction purposes.As a leading supplier of eco-conscious materials, we take pride in offering a diverse range of recycled materials, including cryolite, carbon anodes, carbon dust, bath material, steel scrap, fine iron scrap, rebars and more. With a strong commitment to sustainability, our materials are engineered to meet the demanding needs of industrial projects while promoting environmental responsibility.

Certified Clinical & Engineering Specifications

Indicated for enteral nutrition, stomach decompression, and oral drug administration

Biocompatible flexible PVC (Shore A80) with frosted low-friction outer finish

Embedded radiopaque lead balls in distal tip for immediate fluoroscopic placement confirmation

Four staggered lateral eyes to prevent occlusion and ensure continuous suction flow

Calibrated depth rings at 40, 50, 60, and 70 cm from the tip with or without adaptor

Export Packaging Standard
50 pcs/box 400 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 13485, Sterile EO

Sterilization / Cleanroom
ISO Class 7/8 100% EO Sterilized

Certified Clinical & Engineering Specifications

Thermosensitive transparent medical PVC contouring smoothly to airway anatomy

Features atraumatic rounded tip with Murphy Eye ensuring continuous bilateral ventilation

Continuous radiopaque X-ray line along full length with calibrated depth centimeter markings

Universal 15 mm standard connector compatible with all ventilators and anesthesia machines

High Volume Low Pressure (HVLP) cuff provides optimal tracheal seal without mucosal ischemia


Export Packaging Standard
10 pcs/box-100 pcs/ctn

Harmonized Tariff Code
HS 9018.39

Quality & Regulatory Marks
CE, ISO 5356-1, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

Certified Clinical & Engineering Specifications

Complete extracorporeal blood circuit comprising color-coded Arterial (Red) and Venous (Blue) lines

Precision-calibrated silicone pump segment compatible with major dialysis systems (Fresenius, Gambro, Nipro, Baxter, B.Braun)

Fitted with hydrophobic transducer protectors, heparin infusion line, drip chambers, and priming bag

Biocompatible non-DEHP medical PVC formulated to minimize hemolysis and thrombogenesis

100% Egyptian precision cleanroom extrusion, ultrasonic assembly, and EO sterilization

Export Packaging Standard
1 set/sterile pouch 24 sets/master ctn

Harmonized Tariff Code
HS 9018.90

Quality & Regulatory Marks
CE, ISO 8637-2, ISO 13485

Sterilization / Cleanroom
ISO Class 7/8, 100% EO Sterilized

Gremlog Trading DMCC stands at the forefront of the metal recycling industry, offering a meticulously curated selection of carefully sourced and recycled metal scrap solutions. Our comprehensive range includes:

Cast Iron Scrap: Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.

Aluminium Scrap: Crafted from precise recycling processes, our aluminium scrap adheres to stringent purity standards, ensuring optimal performance in the production of high-quality aluminum alloys.

Steel Scrap: Derived from the efficient recycling process our steel scrap undergoes rigorous processing to meet exacting specifications, guaranteeing consistency and reliability for diverse industrial applications.

Rebars: Our meticulously sorted and processed rebars are characterized by its uniformity and purity, ideal for applications demanding precise metallurgical properties.

Fine Iron Scrap: Engineered for excellence, our fine FE scrap undergoes advanced processing, delivering a product that meets the stringent demands of modern manufacturing processes.

Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.

Engineered for excellence, our fine FE scrap undergoes advanced processing, delivering a product that meets the stringent demands of modern manufacturing processes.

Especially in protected cultivation during the spring and summer months, when temperatures and relative humidity are high, elongation problems occur in plants due to irregular temperature and watering. During these periods, plants may undergo excessive vertical growth, leading to the interruption of generative development.

Unico Iron Man prevents this excessive growth in plants by:

Tightening the internodes

Thickening the cluster stems to prevent breakage and fruit drop

Restraining excessive vertical growth and protecting the plant against diseases

Positively encouraging root development

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.

Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

We are supplying high quality of C.I/D.I Fittings. C.I.D Joints (sizes 80 mm to 1200 mm), Butter Fly Valves, Non Return Valves & Air Valves (sizes 80 mm to 1200 mm), Pipes, Fittings and Flanges.