Find Verified Heaters Suppliers, Manufacturers and Wholesalers

Specifications:
Height: 4m-12m
Solar panel: 40Wp- 350Wp (poly-crystalline silicon)
Battery: 12V-24V-36V/40AH-400AH (lead acid)
Bulb: 10W-90W LED
Controller: intelligent controller
Charging time: 8-30 hours
Working time: 8hrs/day, 3-7 rainy days (energy saving setup available)
Working temperature: -30? ~ 70?
Protection grade: IP 65


Application:
Roadways, express ways, playgrounds, parking lots, service stations, and so on

1.Stylish slim line design
2. Thermosiphon operation minimises maintenance
3. Electric booster models available
4.Inner tank with vitreous enamel or SUS304
5. Collector absorber with black chrome coating
6. Unpressurized system
7. Reliable, low maintenance operation
8. Flexible option of collector and tank capacity
9. Enhanced protection for maximum life
10. Easy mounting and installation.

Inner Tank Material: Stainless Steel Power Source: Solar

Features:
1) Water tank capacity: 10L x X tube
2) Heat collector machine size: ª¦58 x 2.0m
3) New vacuum hot tube ª¦58 ó¬1800 mm
4) Inside water chest: imported BS SUS304-2B stainless steel (food class)
5) Outer water shell: A luster resembling plate (colors: white, argentine, gold) or stainless steel
6) Heat insulation layer: 60mm ammonia ester integral foaming, superior heat preservation
7) Grade A material: imported hot zinc steel plate
8) Glint plank angle of elevation: 45/50
9) Water tank diameter: 480mm
10) Falling water collection method.

Product Name: Standard Model Separate Solar SystemPlace of Origin: ChinaFeatures:
1) Collector size: 130mm x 130mm
2) Vacuum tube: 1,500mm / »47, 12pcs/sector 24 tubes/set
3) Vacuum tube: 1,800mm / »58, 15pcs/set, 20pcs/set or 30pcs/set
4) Tank: 150L, 200L, 300L
5) Collector housing: 0.8mm stainless steel, frame 1.5mm stainless steel, insulation material, rock wool or olyurethane
6) Porcelain enamel inner tank, super-big magnesium rod, scale-resist, endure 21 bar pressure
7) Works normally if one tube damaged

Product color: black
Product power: 1500W
Voltage: 110-240V
Product size: 157X157X251MM

Model:DY58/1800-24
Capacity:200L
Tr-element hitech Vacuum Tube :
Material:High Boronsilicon 303 Glass
Szie: 58mm*1.8mm
QTY:24pcs
Improve solar energy absorptivoty more than 24% than general tube,double layer glass tube between two layer vacuate (vacuum degree more than 1.3310-3Pa) packaged .Adopt PEPAC Multi target interference film technique add purple paint at the basic technology of megnetron sputtering technology deposits more layer gradual changed selective suction membrane on inner and ouer tube wall.Solar energy absorptivity more than 97%.Thermal emissivity lower 6%. Air Stuffy temperature up to 280,good heat-insulating property.40 also use in winter.Bear diameter 2.5mm hail attack.
Water Tank :Inner Tank +Insulation Layer+Outer Tank
Inner Tank:
material:SUS304-2B Food Grade Stainless Steel
Szie:360*1860mm , Thickness:1.2mm , Hole Distance 750mm
Permanent insulation, 304 stainless steel inculde Chromium,forms Chromium oxidation protective film to protect tank body in surface,Show Matt,No rust
Insulation Layer:
Material:Polyurethane Foam ,Thickness 5.5-6.0cm , high temperature and high pressure Using electronic measurementand integral foaming technology,Primary molding,Super insulation,Keep warm time over 72hours,with thickened foaming layer.
Outer Tank:
Material:304/202 Stainlees Steel
Size:Ã?460*1950mm, Thickness:0.31mm , Hole Distance 750mm,Rivet free inner buckle head cap
Bracket :
Material: Al-alloy
Size:1940mm, Thickness15mm
Angle:45degree, easy install/dismantle,Free offer stailess steel 202 nuts and screw
Packing Details as following:
Vacuum Tune (58mm*1.8m):
8pcs/CTN,Size:1870*270*165;10pcs/CTN Size:1870*330*165mm 12pcs/CTN,Size:1870*270*240mm;15pcs/CTN,1870*330*240mm
40'HQ:6640-7290 pcs; 20'GP:2600pcs
Water Tank Packing Szie:480*480*1970mm
Bracket Packing Size:320*110*2000mm
Remark
1. MOQ: 100set, With Certificated :CE,RoHS ,Energy consumption label.
2. Payment Term: 1). T/T, 30% deposit, Pay balance after see copy B/L. 2).West Union Pay 3). L/C
3. Leadtime: 10-15days
4. Lifetime: Vaccum Tube : 15years, Water Tank:15years, Bracket:15years
5. Price Will Be Reduce 10% If Choose Outer Tank Material :Color Steel Plate; Bracket Material: Galvanized Steel

Model:DY58/1800-36
Capacity:300L
Tr-element hitech Vacuum Tube :
Material:High Boronsilicon 303 Glass
Szie: 58mm*1.8mm
QTY:36pcs
Improve solar energy absorptivoty more than 24% than general tube,double layer glass tube between two layer vacuate (vacuum degree more than 1.3310-3Pa) packaged .Adopt PEPAC Multi target interference film technique add purple paint at the basic technology of megnetron sputtering technology deposits more layer gradual changed selective suction membrane on inner and ouer tube wall.Solar energy absorptivity more than 97%.Thermal emissivity lower 6%. Air Stuffy temperature up to 280â??,good heat-insulating property.40 also use in winter.Bear diameter 2.5mm hail attack.
Water Tank :Inner Tank +Insulation Layer+Outer Tank
Inner Tank:
material:SUS304-2B Food Grade Stainless Steel
Szie:360*2760mm , Thickness:1.2mm , Hole Distance 750mm
Permanent insulation, 304 stainless steel inculde Chromium,forms Chromium oxidation protective film to protect tank body in surface,Show Matt,No rust
Insulation Layer:
Material:Polyurethane Foam ,Thickness 5.5-6.0cm , high temperature and high pressure Using electronic measurementand integral foaming technology,Primary molding,Super insulation,Keep warm time over 72hours,with thickened foaming layer.
Outer Tank:
Material:304/202 Stainlees Steel
Size:460*2850mm, Thickness:0.31mm , Hole Distance 750mm,Rivet free inner buckle head cap
Bracket :
Material: Al-alloy, Size:2900mm, Thickness15mm, Angle:45degree, easy install/dismantle,Free offer stailess steel 202 nuts and screw
Packing Details as following:
Vacuum Tune (58mm*1.8m):
8pcs/CTN,Size:1870*270*165;10pcs/CTN Size:1870*330*165mm 12pcs/CTN,Size:1870*270*240mm;15pcs/CTN,1870*330*240mm
40'HQ:6640-7290 pcs; 20'GP:2600pcs
Water Tank Packing Szie:480*480*2870mm
Bracket Packing Size:320*110*2920mm
Remark
1. MOQ: 100set, With Certificated :CE,RoHS ,Energy consumption label.
2. Payment Term: 1). T/T, 30% deposit, Pay balance after see copy B/L. 2).West Union Pay 3). L/C
3. Leadtime: 10-15days
4. Lifetime: Vaccum Tube : 15years, Water Tank:15years, Bracket:15years
5. Price Will Be Reduce 10% If Choose Outer Tank Material :Color Steel Plate; Bracket Material: Galvanized Steel

1. Voltage: 110-240v
2. Power: 1500W.
3. PTC heating elements, instant warm
4. Anti-burned grid , no hurt touch
5. Super silent motor, enjoy a quiet and pleasant night.
6. Fall down - Power off design.
7. Two power choice: 750W / 1500W.
8. Removable Base, load more quantites.

Specification
This product mainly consists of alloy electric heating wires and silicone rubber high temperature insulating cloth,it generates heat rapidly with even temperature,high heat efficiency &good toughness,it conforms to American UL94-V0 grade flammability standard, it is easy to use,safe and water-proof,the aging life can be as long as 5 years.
Technical Parameters
1) The maximum temperature resistance of the insulating material:250C
2) Highest service temperature:250 C-300C
3) Insulating resistance:5M
4) Compressive strength:1500v/5s
5) Power deviation rate:±8%
6) High voltage resistance:>5KV
7)Maximum 1000mm 8000mm minimum 20mm, 20mm thickness1.5mm (thinness 0.8mm,thickness 4mm)lead wire length: Standard 200mm, in case
that the above dimensions are exceeded, please contact with our company.
Features
1) Designed according to actual shape and dimensions, including three-dimensional
geometry to meet the requirement of your equipment
2) Moisture-proof and non-slip silicone rubber material offers longer working life of heaters
3) Simply sticking to your components through sulfuration, adhesive or fixer

Specification
Tempera - Control Range - 0-150
Specification - 1860*860mm
Voltage - 220V
Power - 1200W
Material -0 gh temperature resistant cloth + heating wire
Colour - Black, blue, gray, yellow (random)

Product color White
Product size 1000 X 120 X550 MM
Product Weight 12.5KG
Product introduction: The product consists of a heating element and a shell. The heating element is heated by nickel-chromium alloy wire and the aluminum fins dissipate heat. The shell is made of high manganese carbon steel.

* Portable warm heater/cooler fan. Dual mode
* Humanized design: time control. Automatic power off with 4/8/12/24 hours
* High/Low power setting. High: 1900W Low: 1600W
* High temperature. Compact with low noise
* Aluminum-Titanium alloy metal
* Automatic power off when tilt 45 degree within 360 degree
* Shell is not hot and keep at room temperature except "air outlet"
* Dimension: 34x28x15cm

Electrostatic Precipitator Insulator Heater

The ESP (Electrostatic Precipitator) Insulator Heater from Dawei is a premium spare part independently developed and manufactured by the company, ensuring both competitive pricing and guaranteed quality. Engineered to maintain the stable, safe, and efficient operation of high-voltage systems in electrostatic precipitators, this ESP insulator heater prevents condensation on insulator surfaces, effectively reducing the risk of leakage and electrical discharge. With a commitment to customer satisfaction, strict factory management, and cutting-edge technology, Dawei integrates the most advanced solutions from international environmental enterprises to deliver reliable, durable, and first-class products, establishing itself as a pioneer in domestic environmental protection technology.

Working principle and goal of ESP Insulator Heaters
By continuously heating the insulator, the surface temperature is always higher than the dew point temperature of flue gas, so that water vapor cannot condense, thus ensuring that the insulator is dry and has good insulation performance. High-voltage electricity is stable, all of which are used for effective dust removal. Safe operation of equipment to avoid failure.

silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.

We are the manufacture of plug, if u interested in any specification,pls let me know.

BX7
Product description:
1.Heat cycle
One key start heat cycle, intelligent water cycle, heat the water and transport to each tap
2.Preheat pool
Preheat pool collect cold water and heat cycle hot water mix together and then outlet, maintain water temperature balance
3.Easy heat valve
The easy heat valve is specially designed for houses without back water pipe circuit. Quick installation or upgrading in 30min without redecorating the house .
4.iCloud control
Intelligent core process system combine intelligent control and iCloud operation feedback. Use phone APP control achieve water preheat, heat supply, temperature control, ON/OFF, gas consumption query.
5.Convenient
One key start heat cycle, quick start, preheat. Mobile phone control
6.Durable
300,000 time main controller test, 100,000 time water hammer impact test, 3,000 hour continuity burning test.
7.Energy conservation
One key start ECO mode, reach setting temperature automatic flameout until temperature get under setting temperature, night time automatic select sleep mode, maximum save 15% per day.
8.Technology
LED display, clear interface
9.Silent
Water pump and fan all frequency conversion, basic on machine working feedback adjust air intake and water inlet, to work with three layers chamber, minimum sound volume only 38dB.
10.Dependable
Multiple protection protect you and your family safety every second
11.Reliable
Combine heating and heat cycle two system, quick switch, stable instant heat heating process maintain water temperature balance. Also has three heat cycle mode at your choice
Power:
18kW/24kW

Model L1PD20-18B2
Maximum heating power(kW) 32/12.5
Minimum heating power(kW) 28.8/11
Heating maximum temperature :85
Heating temperature range : Radiator:30~80; floor heating:25~60
Tank capacity(L) :10
Heating area : 100~250
Bathing water Temp.risk 25K(kg/min) 16
Bathing water Temp.risk 30K(kg/min) 13.5
Bathing temperature range 35~60
Bathing water pressure(MPa) : 0.02~0.8
Voltage rating (V / Hz) : 220V-50Hz
Power rating (W) : 100
Product size (mm) : 740*480*356
Net weight (kg) : 44.5

B6.2
Product description:
1.LED tuch screen, quick start
LED touch screen, clear design, easy understand, quick to start. integrated shell.
2.Multiple denoise
Multiple noise design with silent burning system, minimum sound volume only 42dB, Just like whisper.
4.Multiple Protection

Freeze-proofing, explosion proof, flameout protection, over temperature protection and leakage prevention. Protect you and your family safety
5.Precise heating
Automatic fire adaptation, Summer partial combustion, Winter full combustion, Summer the water temperature just right, Winter the water temperature Warm and comfortable, satisfy different season .
5.Energy saving model, maximum save 8% gas
Energy saving or comfort model, Energy saving model can save gas 7.5%, comfort model has balance temperature, feel more joy
7.Internet connect, preheat your home
MACRO second generation WiFi control system, use your phone to connect. Change temperature, ON and OFF, preheat on your phone, even gas quantity, order maintenance
8.Precise heating
Automatic fire adaptation, Summer partial combustion, Winter full combustion, Summer the water temperature just right, Winter the water temperature Warm and comfortable, satisfy different season .

Power:
18kW/24kW

Model L1PD20-20B6.2 L1PD26-26B6.2
Maximum heating power(kW) 20/8.5 25.6/9.5
Minimum heating power(kW) 19/7.9 24.9/9
Highest/Lowest gas quantity(m/h) :20/8.2 26/9.2
Heating maximum temperature : 85
Heating temperature range : Radiator:30~80; floor heating:
Heating maximum water
perssure (Mpa) : 0.3
Tank capacity (L) : 6 6
Heating area : 60~150 80~200
Bathing water Temp.risk 25K(kg/min) 12 15
Bathing water Temp.risk 30K(kg/min) 9 11
Bathing temperature range () 35~60
Bathing water pressure(MPa) 0.02~0.8
Voltage rating (V / Hz) 220V-50Hz
Power rating (W) 135
Product size (mm) 800*420*318
Net weight (kg) 37 48
Highest exhaust temperature : 75

B5
Product description:
1.LED tuch screen, quick start
LED touch screen, clear design, easy understand, quick to start. integrated shell.
2.Multiple denoise
Multiple noise design with silent burning system, minimum sound volume only 42dB, Just like whisper
3.Gas quantity query
Gas quantity query. Easy to check your gas quantity on your phone or the water heater
4.Heat exchanger technology
Dense laminated plate heat exchanger technology, higher heating effectiveness.
5.Multiple Protection
Freeze-proofing, explosion proof, flameout protection, over temperature protection and leakage prevention. Protect you and your family safety
6.Temperature control
Multiple temperature control system, constant monitor inlet/outlet water temperature, reaction faster than common product, heating time decrease 10%
7.Internet connect preheat your home
Macro second generation WiFi control system, use your phone to connect. Change temperature. On and OFF, preheat on your phone, even gas quantity, order maintenance.

Power:
18kW/24kW

Model : L1PD20-18B5 L1PD26-24B5
Maximum heating power(kW) : 20/18 26/24
Rated daily water input : 22 30
Minimum heating power(kW) 8/7 11.2/9.5
Highest/Lowest gas quantity(m/h) 2.2/0.8 3.0/1.12
Heating maximum temperature () 85
Heating temperature range () Radiator:30~80; floor heating:25~60
Heating maximum water
perssure (Mpa) 0.3
Tank capacity (L) 6
Heating area : 60~150 80~200
Bathing water Temp.risk 25K(kg/min) 11 15
Bathing water Temp.risk 30K(kg/min) 9 13
Bathing temperature range () 35~60
Bathing water pressure(MPa) 0.02~0.8
Voltage rating (V / Hz) 220V-50Hz
Power rating (W) 130
Product size (mm) 720*420*365
Net weight (kg) 34

B3
Product description:
1.Internet connect, preheat your home
MACRO second generation WiFi control system, use your phone to connect. Change temperature. ON and OFF, preheat on your phone, even gas quantity, order maintenance.
2.LED tuch screen, quick start
LED touch screen, clear design, easy understand, quick to start. integrated shell.
3.Energy conservation
One key start ECO mode, reach setting temperature automatic flameout until temperature get under setting temperature, night time automatic select sleep mode, maximum save 15% per day.
4.Multiple denoise
Multiple noise design with silent burning system, minimum sound volume only 42dB, Just like whisper.
5.Precise heating
Automatic fire adaptation, Summer partial combustion, Winter full combustion, Summer the water temperature just right, Winter the water temperature Warm and comfortable, satisfy different season .
6.Multiple Protection
Freeze-proofing, explosion proof, flameout protection, over temperature protection and leakage prevention. Protect you and your family safety
Power:
18kW/24kW

Model L1PD20-18B3 L1PD26-24B3
Maximum heating power(kW) 20/18 26/24
Minimum heating power(kW) 8/7 11.2/9.5
Highest/Lowest gas quantity(m/h) 2.0/0.8 2.6/1.12
Heating maximum temperature () 85
Heating temperature range () Radiator:30~80; floor heating:25~60
Heating maximum water
perssure (Mpa) 0.3
Tank capacity (L) 6 6
Heating area ( :60~150 80~200
Bathing water Temp.risk 25K(kg/min) 10 13
Bathing water Temp.risk 30K(kg/min) 8 11
Bathing temperature range :35~60
Bathing water pressure(MPa) 0.02~0.8
Voltage rating (V / Hz) 220V-50Hz
Power rating (W) 130 135
Product size (mm) 720*420*365
Net weight (kg) 36 37

1.Intelligent mode and reservation
2.Display adopted
3. Instant and quick heating mode
4. Heating Countdown
5. Electricity inquiry
6. Medium temperature insulation
7. Energy saving single wash
8. MAX Multiplication
9. Eleven-fold Safety Protection

Capacity:
25L

Model X4
Capacity 25L
Product size : 740*318*405
Heating power
Temperature range : Voltage rating 220V~50Hz

S9
Product description:
1.Non Electric water more secure
2.Water flow start disconnect
3.Internet control for preheat
4.Multi bath mode
5.Durable inner tank
6.Anti-electric leakage system
7.Special water purifier
8.Display remaining water
9.Self-cleaning system
Capacity:
60L

Model S9
Capacity 60L
Product size : 860*456*450
Heating power : 100W/2000W/3000W
Temperature range : 30~75
Voltage rating : 220V~50Hz
Socket specification : 16A

S3
Product description:
1.Non Electric water more secure
2.Water flow start disconnect
3.Anti-electric leakage system
4.Add magnesium rod increase service life
5.Digital screen
6.2000W fleah heat
Capacity:
50L/60L/80L/100L

Model D50-S3 D60-S3 D80-S3 D100-S3
Capacity 50L 60L 80L 100L
Product size : 410*750< 410*870, 480*800, 480*950
Heating power 2000W 2000W 2000W 2000W
Temperature range 30~75, 30~75 30~75, 30~75
Voltage rating : 220V~50Hz 220V~50Hz 220V~50Hz 220V~50Hz
Socket specification : 16A 16A 16A 16A

LOW NOX SERIES
Product description:
1.uCO : 600ppm
2.Nox : 20ppm
3.Sound :60dB

Capacity:
16L/20L

E5
Product description:
1.Temperature control
2.Outdoor installation with maximum line controllers
3.PC broad

Capacity:
25L/28L

Model JSW50-25E5 JSW56-28E5
Capacity 25L 28L
Net Weight 20KG 23KG
Gross Weight : 22.2KG 25.5KG
Gas Type : NG&LPG NG&LPG
Product Size : mm : 587*364*181 587*364*181
Packing Size :742*452*277 718*455*252
Pipe Size : 60 60

K3S
Product description:
1.Changeable liter
2.Proportional valve
3.Temperature control

Capacity:
10L/12L/13L

Model JSG20-10K3S JSG24-12K3S JSG26-13K3S
Capacity 10L 12L 13L
Net Weight 10.5KG 10.5KG 11KG
Gross Weight 13.5KG 13.5KG 14KG
Gas Type NG&LPG NG&LPG NG&LPG
Product Size : mm : 525*340*155 525*340*155 525*340*155
Packing Size : 717*472*270 717*472*270 717*472*270
Pipe Size : 60/100 60/100 60/100

BF1
Product description:
1.LED adopted
2.Double ignition pin, automatic electrical pulse ignition device
3.Anti wind flow back device

Capacity:
8L/10L

Product Parameter :
Model JSQ16-8BF1 JSQ20-10BF1
Capacity 8L 10L
Net Weight 10KG 10KG
Gross Weight 13KG 13KG
Gas Type NG&LPG NG&LPG
Product Size : mm : 525*340*155 525*340*155
Packing Size : 717*472*270 717*472*270
Pipe Size : 60 60

A8
Product description:
Product Description :
1.Changeable liter
2.multiple temperature inspect system
3.Hand make spare part
4.Efficient heating
Capacity:
13L/14L/16L

Product Parameter; :
Model JSQ28-13A8 JSQ28-14A8 JSQ28-16A8
Capacity 13L 14L 16L
Net Weight 11.5KG 12KG 12KG
Gross Weight 14.5KG 15.5KG 15.5KG
Gas Type NG NG NG
Product Size mm : 525*340*155 525*340*155 525*340*155
Packing Size : 717*472*270 717*472*270 717*472*270
Pipe Size : 60 60 60

SEGMENT- Boiler Economiser

SEGMENT- boiler flue gas waste heat recovery device

G_ Pulverized Coal Fired Boilers
Single drum, single furnace, natural circulation pulverized coal fired boiler is regularly arranged with equilibrating ventilation, solid removal, all steel suspension structure, all welled membrane walls, control damper at the back passes. Platen super-heater, end super-heater and low temperature super-heater, economizer and air pre-heater are arranged along with smoke flow process in sequence.

Technical Features
1. The unit is equipped with tilting corner nozzles for a tangential firing system to keep the air dynamic field inside the furnace without tilting
2. The furnace is optimally designed with proven structures proper arrangement and thermal parameters. A certain control margin are reserved sufficient to ensure complete combustion, high thermal efficiency , safe and stable operation
3. The thick-light patent is adopted for the primary air to allow easy firing and anti-sintering
4. The damper structure makes it a nice appearance
5. Three stages arrangement for super-heaters and two stages of water spray de-super-heating.
6. Tubular air pre-heater with the primary and secondary air separate arrangement.

Brief Introduction of the CFB Boiler
The circulating fluidized bed boiler is a high pressure, single drum, steel structure and natural circulation boiler. The arrangement for the integrated boiler is adopted. Rectangular section of the combustion is adopted for the boiler. The membrane wall construction is arranged for the four sides walls of the furnace and enclosure of the rear pass. Water-cooled platen and secondary super-heater are arranged in the furnace while abrasion resistant refractory is lined in the emulsion zone at the lower part of the furnace to protect the furnace from erosion in operation. The super-heaters are divided into SH1, SH2 and SH3. Convection super-heater, economizer and horizontal tubular air pre-heater with primary and secondary airflow separators are arranged in the rear pass in sequence.
Two hot or steam-cooling cyclones with U type loop seal is arranged between the furnace and rear pass of the boiler. The cyclones are lined with refractory to assure reliable operation. Anti-explosion buck-stay and expansion center with non-metal expansion joint are arranged for the boiler to solve the tri-direction expansion problem.



Technical Features of the Boiler
* The design of the advanced water-cooled grid with even distributed air, large bell type nozzle, reasonable resistance and no blocking makes the boiler long service life ;
* Large width-to-depth ratio of the furnace to facilitate the secondary air passing through and being mixed ;
* High efficiency heat insulation cyclone separator is adopted ;
* Stable and reliable operation and high efficiency insulated or air-cooled cyclone ;
* Self equilibrating U type loop seal for returning the circulating material to make the control simple and reliable ;
* Three stage super-heater arrangement with the secondary super-heater in the furnace to improve the radiant characteristic of the super-heater efficiency ;
* Spray type de-super-heating is adopted to get fast de-super-heating reliably and safely ;
* Tubular air pre-heater with the primary and secondary air separate arrangement.

We are the manufacture of cartridge heaters, if u interested in any specification,pls let me know.

We are the manufacture of nozzle heaters,if u interested in any specification,pls let me know.

Coil heater series
WE ARE THE MANUFACTURE OF COIL HEATERS.
It is a company that specializes in manufacturing all kinds of these products, has high-tech content.

SPECIFICATION:
1) Ni-Cr alloyed metal as heating element.
2) Round, square and rectangular cross sections.
3) Dimensions (cross sections in mm)
Square: 2x2mm,3x3mm, 3.5x3.5mm, 4x4mm,5x5mm,6x6mm,7x7mm,8x8mm
Round:1.5mm,1.8mm, 2.5mm,3mm, 4mm, 5mm,6mm,7mm,8mm
Rectangular: 4x2mm,4.2x2.2mm
4) Rated Voltage: 220V, 230V, 240V,380V,110V,127V,24V,36V,12V
5) Rated Power:30w (min)
6) Inner Diameter:6mm(min)
7) Length:20mm(min)
8) Type J and K thermocouples available
9) Luster: Polished or Sand-blasted

Band Heater series
Double-deck stainless steel heating circle HSB1-B2

We have established ourselves in international markets as a trusted firm, which is dealing in Annealing Furnace. It is made by utilizing highly qualitative components following the specifications of given by our patrons so as to gain their optimum satisfaction. In addition to this, the fabrication of this furnace is completed within committed time-frame. Reasonable amount is charged for fabrication of Annealing Furnace to suit clients\' budgetary constraints.

Product Introduction:
The Product GX-SQ Double Curved Bending & Tempering Furnace is a high-end solution engineered for producing true 3D curved tempered glass. Unlike standard bending machines, this system bends glass simultaneously in two directions, making it essential for complex automotive rear windshields, sunroofs, and modern architectural domes.

By integrating forced convection heating with a high-performance quench system, the GX-SQ ensures uniform stress distribution and eliminates optical distortion, providing the reliability industrial manufacturers need for high-stakes safety glass production .

Application:
You can apply the Product GX-SQ Double Curved Bending & Tempering Furnace to a variety of high-demand sectors:

�· Automotive: Rear windshields, sunroofs, and engineering vehicle windows.

�· Architecture: Glass domes, skylights, and double-curved fa�§ade panels.

�· Furniture: High-end 3D curved decorative glass and functional panels.


Technical Characteristics:
�· Process stability first: Designed for repeatabilityâ??critical for automotive glazing and engineered architectural projects.

�· Energy-saving focus: Optimized insulation and airflow paths help reduce unnecessary heat loss.

�· Optical quality focus: Uniform heating + stable quench helps reduce common curved-glass appearance issues.

�· Customization depth: Furnace size, heating zones, mold solution, quench structure, and automation level can be matched to your glass geometry and output targets.



Features and Advantages:
�·True 3D Bending Technology: Enables simultaneous two-directional bending for complex geometries that single-curve machines cannot achieve.

�·Forced Convection Heating: Ensures uniform temperature across the glass surface, preventing local overheating and maintaining excellent optical quality.

�·High-Precision Quench System: Rapidly stabilizes double-curved shapes to meet strict automotive and construction safety standards .

�·Intelligent PLC Automation: Precisely controls the entire bending and tempering cycle for high repeatability.

�·Energy Efficiency: Optimized airflow design reduces power consumption while maintaining industrial-grade performance.



Technical Parameters(mm)

ModelThickness Max LoadingArea Min Radius Max Depth Productivity (Loads/H)
GX-SQ1608 3.5-6 1600*800 100 150 35-65
GX-SQ1610 3.5-6 1600*1000 100 150 35-65
GX-SQ1612 3.5-6 1600*1200 100 150 35-65
GX-SQ1808 4-6 1800*800 150 150 35-65
GX-SQ1810 4-6 1800*1000 150 150 35-65
GX-SQ1812 4-6 1800*1200 150 150 35-65
GX-SQ2010 4-6 2000*1000 150 250 35-65
GX-SQ2210 4-6 2200*1000 180 250 35-65
GX-SQ2216 4-6 2200*1600 180 250 35-65

Tonexus carbon capture and storage oil and gas technology uses a fast-absorbing, low-energy solvent (<2.0 t steam/tCO), advanced heat recovery, and optimized gas-liquid separation to minimize solvent loss. This sophisticated wet scrubbing technology, combined with efficient equipment and energy-saving design, achieves leading performance and low operational costs in China's carbon capture at source industry.

CO Capture via Wet Scrubbing Technology: The Capture and Regeneration Process
Our carbon capture technology responds to the needs of owners to capture and recover CO from flue gases. The absorption solvent (the core of the wet capture technology)used has a fast absorption rate, a high net COâ?? capture load, and the lowest regeneration energy value in China (the lowest regeneration energy value can be less than 2.0t steam/tCO)

In terms of heat utilization within the carbon capture steel device, the proprietary heat exchanger equipment is designed with a perturbed structure to achieve a very low temperature difference(5~7k)at the hot end of the heat exchanger, realizing highly efficient heat recovery and utilization. At the same time, the latent heat of regenerated gas is skillfully applied to solve the problem of unutilized latent heat of regenerated gas in the traditional process.
Within the low-carbon transformation of industrial and energy sectors, flue gas services cover the integrated technical work of capture, purification, conditioning and subsequent utilization or storage of carbon dioxide present in combustion exhaust gases. Operators providing such services must account for both the cost of carbon per ton and the CCUS cost per ton, because these two indicators define the commercial viability, technical route selection and long-term operating performance of emission reduction projects.

For more details of flue gas denitrification, please leave us a message.

As a carbon capture sequestration technology co., ltd., we will do our best to meet all the needs of clients.

Product Features
1. Adopting a wet back structure, offsetting the furnace chamber, and corrugated furnace liner greatly improves the heating surface and strength.
2. The boiler has a large heating surface area, fast temperature and pressure rise, and easy operation.
3. Reasonable and compact structure, strong load adaptability, complete combustion, and high thermal efficiency of 105%.
4. The condenser is made of high-quality sulfuric acid dew point corrosion resistant steel 09CrCuSb (ND steel) spiral finned tubes, which have a long service life.
5. The condenser is installed on the upper part of the boiler, without occupying any space, and the condensed water on the heat transfer surface can also be naturally discharged.
6. The safety accessories of the main body are complete, ensuring safe and economical operation.
7. Equipped with high-quality and high-performance burners, the combustion is stable and reliable. Ultra low nitrogen emissions, meeting the strictest environmental standards.
8. High degree of automation, saving labor.
9. The boiler has a small volume, light weight, small footprint, and low infrastructure investment.

LHG series vertical biomass steam generator adopts biomass pellet, wood chips, sawdust as fuel. It features automatic feeding, sufficient combustion, high thermal efficiency and low operating cost.
Equipped with multiâ??level safety protection devices and PLC control system, easy operation. Compact vertical structure, small floor occupation, convenient for installation.
Widely applied for food processing, textile industry, feed processing, distillation, drying, sterilization, hotel heating and other industrial steam supply.
Support customized working pressure and capacity according to customer requirements, CE certificate available.

Hot Dip Galvanizing Furnace Manufacturer Engineered for Your Production Line
Annuo designs and manufactures hot dip galvanizing furnaces for plants of all sizes â?? from general batch galvanizing lines to special furnaces for tubes, pipes, and steel structures. Each furnace is engineered around the customer's actual zinc kettle dimensions, production capacity, and available fuel source, rather than built to a fixed template.
We have built more than 30 complete hot dip galvanizing plants for customers in China and abroad. Recent furnace projects include a general galvanizing line in Chongqing engineered for a 6500-2000-3000mm zinc kettle, and a large steel-structure galvanizing line in Jiangsu Province engineered for a 13500-2200-3500mm kettle see more in our� project case studies.

Understanding the Galvanizing Furnace
The galvanizing furnace is the enclosure in which the zinc kettle is heated to maintain molten zinc at the correct working temperature throughout the galvanizing process. A PLC-based temperature management system continuously monitors and regulates heat input to keep the kettle within its target range, preventing the local overheating that shortens kettle service life.
Heating intensity depends on the fuel source natural gas, oil, or electricity selected according to the customer's local fuel availability and cost. A properly engineered furnace typically has a service life of around 20 years, while the zinc kettle itself (a separate component manufactured from low-carbon, low-silicon steel see our Zinc Kettle page for material specifications) typically lasts 7-9 years before replacement.

Furnace Construction & Features
Three integrated systems: furnace body system, combustion system, and control system
Furnace body structure: welded section steel and steel plates using high-quality carbon steel, with strictly controlled welding deformation to ensure structural stiffness and strength
Internal lining: ceramic refractory fiber composite structure 60mm ceramic refractory fiber layer plus a 300mm ceramic high-alumina refractory fiber folding block, keeping the outer wall temperature low and minimizing heat loss during operation
Combustion system: velocity burning nozzle with dedicated controller for even heat distribution around the kettle, preventing local overheating
Control system:PLC system with instruments, gauges, and a ratio pulse control system for precise, automated temperature management
Modular assembly: ceramic fiber modular construction allows accessible, no-stop inspection and maintenance of burners, ventilation, and regulating valves during production
Fuel flexibility: can be configured for natural gas, oil, or electric heating depending on plant requirements

Capitalizing years of experience in this domain, we manufacture an exceptional range of Industrial furnaces. Integrated with panel-mounted control gear, it is made by using high-quality material with utmost precision in accordance with predefined industry standards. Checked on different stern parameters, it finds wide application in aerospace, aluminum, brass, ceramics, electronics, ferrous metals, finishing, foundry and glass. Extensively used for drying, curing and baking components, parts and final products, this industrial furnace is highly acclaimed in the market.

PRODUCT OVERVIEW
Carbonization Process: Feeding raw material and sealing the furnace Preheating and drying the raw material Anaerobic carbonization, Cooling and discharging the carbon.

CARBON MAKING MACHINE
Carbon making machine, charcoal furnace and charcoal stove clay are made by horizontal manufacturing process, in which there is a three-layer structure with polyurethane insulation material in the middle to keep the temperature inside the furnace. The door of the furnace is sealed with filler, which does not enter the air, and the carbon output is much higher than that of the conventional charring furnace. It is called green carbonization furnace because the carbonizing process produces a lot of yellowish combustible gases from the sticks. These gases pass through the charring furnace with its own pipeline, which allows the combustible gases to be transferred to the charring furnace combustion area for secondary fire heating. It is more environmentally friendly and saves fuel. Excess gas from the charring furnace can be used to dry sawdust or to fire the boiler. The cooling time of the charring furnace is shorter, we use the gap between the intermediate layers to naturally cool the charring furnace with unit water cooling, which is more efficient and convenient.

Charcoal carbonization furnace, smokeless charcoal stove and wood ash charcoal machine can use different material as heating source.Such as the waste wood, coal, gas, natural gas, liquefied gas, combustible gas(produced during the carbonized process)

CONTINUOUS CARBONIZATION FURNACE
Continuous carbonation machine uses the carbonized flue gas purification into combustible gas generated in combustion itself. it can continuous product 24 hours. It has an advantages of zero pollution, zero emission, save labor, high capacity, energy-saving consumption, the high degree of automation and advanced technology. Which is suitable for large-scale production, with high carbonation rate, high carbon production rate, energy saving, environmental protection, high efficiency advantages. This machine is suitable for all kinds of forestry and agriculture powder particles.

KUNTENG Group Service Items
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

Product Description
The continuous rotary furnace is an ideal equipment for dry distillation, anaerobic carbonization and high carbonization rate of wood chips, rice husks, peanut shells, plant stalks, bark and other carbon-containing wood materials (the volume is less than 15mm granular) in the furnace under high temperature conditions.
The continuous rotary furnace reasonably adopts the advanced technology of recovery, purification and circulation combustion of combustible gases such as carbon monoxide, methane and oxygen produced in the carbonization process of materials. That is to solve the problem of environmental pollution caused by the smoke generated by the ordinary carbonization furnace in the carbonization project, and solve the thermal energy problem required by the equipment, fully achieve self-supply, improve the continuity and economy of the equipment, make full use of agricultural and forestry leftovers, make it into treasure, reduce the contradiction between the supply and demand of China's forestry resources, and make more contributions to the green environment.

Working princinple of The continuous rotary furnace
The working principle of the continuous carbonization furnace is that there is a guide plate in the carbonization furnace. After the raw material enters the main carbonization furnace, it moves horizontally under the action of the guide plate with the rotation of the main carbonization furnace, and gradually moves from the feed port to the outlet port, and is carbonized in the moving process. After the feed and discharge of carbon, there are air closures to isolate the air, and the induced draft fan of the carbonization main furnace is used to achieve the oxygen-poor environment in the main furnace during the continuous feed and discharge process.

Company Profile
KUNTENG Machinery Co., Ltd serves the Carbonizing Equipment,Briquetting Machines And Dryers industry and has mature experience in research & development, design, manufacturing and installation. Machinery has cooperated with many manufacturers in China and other countries to provide Carbonizing Equipment,Briquetting Machines And Dryers equipment for the production lines of many manufacturers. Machinery pays attention to customer applicability and product research and development, and the level of production skills is perfect. We undertake the design and manufacturing of various types of Continuous carbonization furnace, horizontal carbonization furnace , lifting carbonization furnace, briquetting machine and dryer,etc.

FAQ
Q1. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
Q2. why should you buy from us not from other suppliers?
Our team has mature experience in research & development, design, manufacturing and installation. Every process is strictly controlled in order to provide you the best products.

Product Description
The composition of lifting carbonization furnace: Including furnace body, furnace cover, heating chamber, exhaust pipe, the furnace body is equipped with a carbonized inner tank, and the carbonized inner tank is installed with a sealing cap, the upper edge of the carbonized inner tank is fixed with a downward folding ring flange, the downward folding ring flange and the upper part of the furnace fixed ring sealing ring matching buckle installation. A lifting ear is fixed on the side wall of the carbonized inner liner, on the upper cover of the carbonized inner liner and on the furnace cover respectively.

Applicable Material
1, the drying stage: from the beginning of the ignition combustion furnace temperature up to 160 �° C, this stage is also a wet stage, mainly rely on the heat generated by the bottom of the fuel to heat the wet, this stage logs, rods or other raw material chemical composition almost no change.
2, the initial stage of carbonization: this stage mainly depends on the external heat value, the furnace temperature rises to between 160 and 280�°C. In this case, the wood thermal decomposition reaction, the composition begins to change. Among the unstable substances are hemicellulose decomposition of carbon dioxide and a small amount of acetic acid and other substances.
3.carbonization stage: temperature 300 ~ 650â??. At this stage, the raw materials are rapidly decomposed and a large number of combustible gases containing tar and other impurities are generated. The combustible gas is transported to the bottom of the furnace through the gas pipeline for circulation combustion, and the raw materials in the furnace are rapidly carbonized to generate carbon rods under high temperature conditions.

Machine Characteristic
Machine characteristics of Lifting Carbonization Furnace
1, carbonization rate of up to 80%, no smoke emission, no pollution, high efficiency
2. The raw materials are carbonized into carbon rods after 6-8 hours. Three internal Dan alternately carbonized continuous work, 24 hours a day can produce carbon 3 times
3. the gas recovery and recycling, their own heating, the recovery rate of up to 90%, saving 75% of energy
4. The lifting carbonization furnace is equipped with a flue gas recovery device, and the recovered flue gas can be ignited like liquefied gas, as a heat source for its own carbonization, and the production environment is smokeless and tasteless.
5. Continuity of production
6. Shut off coke
7.Controllable and adjustable carbonization temperature
8. High heat transfer, high wear resistance of the composite material to form a high-efficiency carbonization chamber

Packing & Delivery
1. Single machine will be packed in wooden case.
2. The machines for whole production line will be loaded into the container directly.

PRODUCT OVERVIEW
Compared with traditional batch carbonization furnaces, KUNTENG rotary drum carbonization furnace,horizontal airflow carbonization furnace, sawdust briquette charcoal making machine, achieve continuous feeding, continuous carbonization, and continuous output, shortening carbonization time, greatly improve production efficiency. KUNTENG sawdust briquette charcoal making machine can be matched with large-scale Shisha charcoal making line or barbecue charcoal making line.
Our sawdust briquette charcoal making machine can also achieve the production process of "carbon, gas, and oil" co production, which is environmentally friendly and no pollution.

Sawdust briquette charcoal making machine Advantages:
1.Continuous production,short carbonization time,large capacity.
2.Closed quenching coke.
3.Controllable and adjustable carbonization temperature.
3.The composite material with high heat transfer and high wear resistance forms a high-efficiency carbonization chamber.
5. All gas is returned to the furnace for combustion without waste gas pollution.

CHARCOAL PRODUCTION LINE
Working principle:
Wood scraps, coconut shell, corn sticks,bamboo scraps,etc, are crushed by shredder machine,if crushed materials moisture â?¤12% can be directly carbonized, otherwise they need to be dried by rotary dryer then carbonized by continuous rotary carbonization furnace, --- After carbonization, it becomes charcoal powder which enters the hopper---mixed with the formula by mixer machine---pressed to shisha charcoal or barbecue charcoal by briquette press machine.

Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

COMPANY PROFILE
Kunteng Machinery founded in 1999, Our mature equipment include Charcoal carbonization furnace, Charcoal briquette press machine,Horizontal carbonizing furnace,Hoisting carbonization furnace.etc. Kunteng Machinery is a high-tech modern enterprise integrating scientific research and development, production and sales, engineering design, installation services. Our machine has passed ISO9001:2000 CCC,CE certification.Our machines has already spread over the world.We can provide customers with one-stop service and solutions, complete equipment, on-site installation, and after-sales support.

Product Description
This Smokeless Charcoal Carbonization Furnace used to transfer material into charcoal.Allow the material to undergo high temperature,remove impurities and obtain the final carbon portion.
And this type furnace suitable for small size material less than 20mm,like sawdust,palm shells,rice husk,peanut shell,bamboo powder etc.

Production Line
If your raw material is small size material,such as sawdust,bamboo powder,rick husk ect.,you can refer to the below production line:Rotary charcoal furnace-Dust free grinder-Mixer-Hydraulci briquette machine-BBQ charcoal or Shisha charcoal.

Packaging & Shipping
The machines for whole production line will be loaded into the 20/40 GP container directly.

Company Information
1.Founded in 1999, KUNTENG Machinery is a technology-based enterprise integrating R&D, manufacturing, sales and after-sales.
2.We have our own R&D(research and development)team. We have ability design the factory building, circuit direction, and machine assemble for the entire project.
3.Wood Charcoal Carbonization Furnace is strictly controlled by the quality inspection department before loading to the container to ensure that each set of equipment work smoothly.
4.The company's products have passed more than 100 national patents, and passed passed ISO, CE quality system certification.

Our service:
Improve the added value of our products, and let the clients free from the using troubles:
1) Assisting the clients preparing for the first construction scheme;
2) Installing and testing the equipment;
3) Training the first-line operators on site;
4) Examining the equipment regularly;
5) Taking the initiatives to eliminate the failure(s) rapidly at site;
6) Distributing the guarantee fittings door-to-door;
7) Providing technical exchanging;
8) Providing maintenance for big items.

FAQ:
1.How many days do you need to produce this machine?
This is specially designed machine according to your specific requirement. From engineer designing
to production completion, It needs about 20-30 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very begining to the end of production. Every
machine will be fully assembled and carefully tested before shipment.
3. What's your machine quality guarantee?
Quality guarantee time is one year, we choose world famous brand components to keep our machine in
perfect working condition.
4. Are you able to give installation and commissioning overseas? How long will it take?
Yes, we supply overseas service, but customer needs to pay for the engineers flight tickets and hotel
foods.Small machine usually takes within 5 days.Big machine usually takes about 20 days.

Asia Pacific Symbol (Shandong) Pulp and Paper Co., Ltd.

1. Help customers meet the emission requirements of export NOx emission concentration � 40mg/Nm³.

2. The equipment is simple and stable, the operating cost is low, and the later maintenance is simpler.

We canprovide kinds of air cleaner that removes dust and the best dust removal machine for sale, anything you need, please contact us.

SOx removal from flue gases is the process of reducing or eliminating sulfur oxides, mainly sulfur dioxide, from combustion exhaust streams before they are released into the atmosphere. This treatment step is important for controlling air pollution and for protecting downstream equipment from corrosion and fouling.

If you want to know more about co2 sequestration technology, please visit our website.

LDR series electric steam boiler is vertical resistance heating type steam generating equipment. It adopts electric heating tube as heat source, fast steamâ??out, clean and zeroâ??emission.
Equipped with PLC intelligent control system, automatic water feeding, pressure adjustment, highâ??low water level protection, overâ??pressure protection, overâ??temperature protection.
Compact floorâ??standing structure, easy for installation and operation. Widely used for food processing, textile, pharmaceutical, chemical industry, sterilization, heating and other production scenarios.
Support 3â??phase 415V/380V custom voltage. CE certification available.