Find Verified Wire Mesh Screen Suppliers, Manufacturers and Wholesalers

Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big

Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.

The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.

Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.

The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.

Y series vibrating screen is vibrated by the circling motion, its high efficient screen for filter materials into multiple grade according to the gravel size. For the compact structure and the convenient installation, it is the ideal screening device for prefilter of the feed materials before the primary crushing in the quarry site, it also can be used as separation and filtration solely.

Vibrating screen adopts cylinder type eccentric shaft vibrator and partial block to adjust the amplitude. The materiel sieve drip line is long and more sieving specifications. The circular vibrating screen can also be used for production classifying in quarry, mine, construction, electricity, chemical industry,etc.

Working principle
Y series vibrating screen is mainly composed of screen box, screen mesh, vibrator, damping spring device, bottom frame and so on. The side plate of vibrating screen is made of high quality steel plate.It is connected with the beam and bottom seat of the vibration exciter with high strength bolts or ring slot rivets, and cylinder type eccentric shaft exciter and eccentric block are used to adjust the amplitude.

Vibrator is installed on the screen box side plate to drive vibrator eccentric block produce high-speed rotation through v-belt by the motor so that could produce large centrifugal force to stimulate the screen box produce a certain amplitude of circular movement.The material on the screen is subjected to the impulse passed by the screen box on the titled screen surface and produces continuous throwing motion.So particles that are smaller than the screen hole pass through the screen so as to achieve classification when material enters the screen surface.

Features & Benefits
1. Vibrating screen YA is of several decks whose moving track is round.
2. The moving track of material is very long; the size of material can be separated into several specifications.
3. It adopts cylinder style inspiring vibrator device and eccentric shaft to adjust. It has the features of reliable structure, strong vibrating generation, high screening efficient, low noise, easy maintenance, safe performance, etc.
4. It is widely used in separating gravel and is also suitable for mining, construction material, transportation, energy, chemical industry and so on.

Long-term is usually taken into account when we choosing spare parts for crushers and screens. And perfect-match spare parts are crucial to the successful operation of any process equipment.
Xinning Minetech screen meshes are adaptable to virious envirometns and tasks designed to offer maximum productivity without compromising on quality.
We help you choose the right screen mesh for your application to maximize the productivity and potimize the screening process with high availability.

Specification
Size : as clients
Aperture : 3mm - big
Wire Diameter : according to aperture
Strip Material : Polyurethane or
Strip Width : 1.5cm - big
Strip Thickness : 8mm - big
Strips Quantity : as client's requests

Description
Self-cleaning screens are a non-blinding, high quality screening surface that provides accurate screening and sizing.
Having many advantages over other screen types, self cleaning mesh gives higher production rates while eliminating the problem of Large unwanted flat
material that contaminates the finished product. We also can add some pu strips on the bars, it will be more wearproof to improve the life.

Advantage:

Anti-clogging
Anti-pegging
Increased wear life
Accurate sizing
Available to suit all types of mobile and static screens

With high quality, non-blinding screening surface the Flexi-Harp is the perfect mesh. The combination of different size wire used in manufacture means that
they vibrate at varying frequencies to produce a self-cleaning surface. Due to its flat surface (no knuckles Self-cleaning screens can use a smaller wire diameter
than woven wire for some applications. Separates flakes and slivers from finished product while greatly reducing problems like plugging and blinding.

Usage Applications:
Iron ore at 6mm with 15% moisture
Raw sand at 3mm with 6% moisture
Compost at 10mm with 50% moisture
Slag at 3mm with 10% moisture
Salt at 3 mm with 5 % moisture
at 3mm with 20% moisture
Lignite at 6mm with 50% moisture
Coal at 6mm with 18% moisture
Limestone at 3mm with 20% moisture
Pet at 3mm with 18% moisture
Plus other hard to screen materials like Wood Chips, Bamboo Chips, Washery Waste, Building Rubble, Soil, Plastic, Auto Parts etc.

Description
Polyurethane Flip Flop Screen Mats have been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane
elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems,
so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics.

Panel size: Length & Width & Thickness are custom designed
Aperture size: 3~32mm
Aperture shape: Square, Rectangle, Slot, Circular

Polyurethane Flip Flop Screen Mats offered make use of quality elastomers that guarantees highest performance support as demanded by the customers. Being used for applications involving screening moist or humid materials, these are also suitable for screening of products material like wood chips, building rubble, plastic and others and can also be custom developed as specified by the customers. These are suitable for screening of moist or humid materials like Iron ore at 6mm with 15% moisture, Raw sand at 3mm with 6% moisture, Compost at 10mm with 50% moisture,
Slag at 3mm with 10% moisture and others.

Specification:
Main technical parameters of Multi-deck Vibrating Stack Sizer
Dimensions: Width 1500mmX Length 4892mmX4142mm
Machine weight: about 4 tons
Screening area: 7.3
Screening inclination: 17.5
Screening efficiency: 85~90%
Amplitude: 0.8~2mm
Maximum Capacity: 45T/h -120 T/h
Screen Panel Aperture: Minimum 0.043mm - 10mm
Decks : 1-deck stack sizer, 2-deck stack sizer , 3-deck stack sizer , 4-deck stack sizer, 5-deck stack sizer

Description:
1. The main body of the Multi-deck Vibrating Stack Sizer is riveted with rivets, which ensures the reliability and stability of the long-term operation of the equipment,
and reduces the number of maintenance and labor.
2. The surface of the Multi-deck Vibrating Stack Sizer is treated with polyurea spraying technology as a whole,
which increases the wear resistance and corrosion resistance of the equipment and prolongs the service life of the equipment.
3. With the self-developed polyweb urethane screen panel (minimum 0.043mm) , the screen is not easy to be blocked,
and five channels are fed at the same time, with large processing capacity and high screening efficiency.

Advantageï¼?
1. Fine screen obtains larger screening capacity with smaller footprint.
2. Greatly improve the mill capacity and greatly reduce the power consumption per unit of ore grinding.
3. Minimize the over-powdering of useful minerals (mudification).
4. Improve metal recovery rate and reduce flotation reagent consumption.
5. Successfully applied to the sorting of metallic and non-metallic minerals.

Shaker screens including but not limited to the following types

Steel Frame Shake Screen

Composite Frame Shaker Screen

Pyramid Shaker Screen

Hook Strip Flat Screen

Hook Strip Soft Screen



We provides all the API series screens from API 20 to API 400.



Our shale shaker screens are available

Specification
The vibrating screen uses the exciting force generated by the exciter.The screen body periodically reciprocates along the direction of the exciting force.
The material bounces around the screen surface. The screen surface is collected and transported to the designated area to achieve the purpose of grading or
de-intermediation. The amplitude can be adjusted by adjusting the weight of the eccentric block. generally divided into circular vibrating screen and linear vibrating screen .

Description
Vibrating screen is an important equipment for solid physical classification and is widely used in mining, building materials, coal preparation, energy, chemical and other industries.

The vibrating screen uses the exciting force generated by the exciter. The screen body periodically reciprocates along the direction of the exciting force.
The material bounces around the screen surface. The screen surface is collected and transported to the designated area to achieve the purpose of grading or
de-intermediation. The amplitude can be adjusted by adjusting the weight of the eccentric block. generally divided into circular vibrating screen and linear vibrating screen.
In order to improve the capacity, we can design the deck size and layers of deck, such as: double decks and 3 decks and 4decks etc.

Features
1. The vibrating screen adopts a side-vibration eccentric block exciter.
2. The exciter adopts the block eccentric form, which not only increases the single excitation force of the eccentric mass of the exciter,
but also can be adjusted randomly, which is convenient for modular design and use.
3. The screen mesh has various structures, including rod screen plate, polyurethane square hole and polyurethane weaving, and manganese steel wire weaving.
4. The eccentric block adjusts the amplitude, the material screen has a long flow line, and there are many screening specifications.
5. It has the characteristics of reliable structure, strong excitation force, high screening efficiency, low vibration noise, sturdy and durable, convenient maintenance and use.
6. The equipment maintenance is simple and convenient, and the operation efficiency of the whole machine is obviously improved.
7. The flexible connection such as cross shaft universal drive shaft or rubber coupling is adopted, and the operation is stable.
8. The structure of the screen machine tends to be simplified, which is conducive to improving the manufacturing process level and assembly accuracy of the equipment.
9. The screening machine has higher screening efficiency, larger processing capacity, longer service cycle and longer service life of the whole machine.

Material
sus 210 304 304l 316 316l 310s 904l 2205 410 430 2507 stainless steel wire.
Mest count
plain weave can be woven from 1- 400 mesh
twill weave can be woven from 2- 635 mesh
dutch wevae can be woven up to 500 3500 mesh

Hole shape square
Wire diameter 0.018-2.2mm
Stock size 1 30m/roll 1.2 30m/roll 1.5 30m/roll or coseomized
Customzied Other sizes can be customzied as per your requiremnts