The bamboo-glued concrete formworks board mainly made from bamboo, it is a new-style formwork as construction material.
1) High strength, good tenacity, static camber of the formwork is about 4-5 times harder than the wood-glued board, this will be able to reduce the consumption of the formworks supporting in practice
2) Wider width, less patching joint (3m2/pc), the square equals to the 6.6pcs of steel formworks at 15 x 3m, faster formwork supporting and removing job. The expenditure is 1-2 times less than the normal steel formwork and wood formwork
3) Glossy surface, easy for formwork removing job, smooth concrete surface, these will bring you a fast construction schedule to the project and make less cost
4) Fine waterproof performance, the adhensive will not come unglued after water boiling, no deformation when be affected with water and damp, indubitable antisepsis and mothproof
5) Thermal coefficient of the formwork is 0.14-0.16 /M.MO,which is much less than the steel formwork, this is propitious to heat preservation during winter construction work
6) High turnover of the formwork due to the both sides utilizing; currently the turnover can be over 10 times under civilized using and proper storage.
The bamboo-glued formwork has wide applications, it is suitable for the horizontal or vertical formwork, high-rise, extempore-pouring concrete wall, floor slab, viaduct, cloverleaf junction, main dam, tunnel and beam column construction.
Our traditonal specifications are 4' x 8' x 10~15mm, 1,000 x 2,000 x 10~15mm.
1) Formaldehyde-free adhesive used in the lamination process that conforms to the European E1 standards
2) Coating:
a) 5-coating finish system provides anti-wear protection of aluminum oxide with 2 topcoats of anti-scratch polyurethane
b) Coating materials: water-based, solvent-free, 100% solid, non-off gassing
3) Rigidity: 1642 (better than maple)
4) Bounce coefficient: 940,000PSI
5) Stability: over 2.5 times than wooden floor
