Services : We at martinez choice logistics provide locating any type of equipment from auto parts to building materials. from ship engines to emergency living quarters. from all types of vegetables to any type of dry commodities (wheat and soy beans). we are located in new orleans la. 7th largest port i. the world. best contact person is alberto rojas (504)485 3657. Established: 2010
Standards: APICS, CPIM, CPSM AND CSCP CERTIFICATIONS
Verification Status
Contact Details:
1112 Odwyer Pl New Orleans La,70121
New Orleans -
70121
LA
United States
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.
Applications:
Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.
Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.
Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.
Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.
Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.
Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.
Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
We provide all types of Dolomite "Crushed, Powder or Bulk" Product - Dolomite Ore Specification MGO: 20% min Caco3: 32% min Al2o3: 0.04% Fe2o3: 0.02% Shipping mode - Containerized or Bulk Packing
olomite powder is an anhydrous carbonate mineral which comprises calcium magnesium carbonate. It finds its use widely in Plastic, in PVC footwear, PVC Pipes, cables and others. One of the most widely used Mineral Fillers in the Plastics and Polymer industry, and its use in rigid packaging has increased significantly over the years due to its low cost and abundance availability.
Calcined alumina can be used in the polishing of different alumina products(mainly used in middle, fine polishing).It is also widely used in high-class aluminium refractory material, unshaped refractory materials, high aluminium ceramic product and advanced coating, etc, . Item Al2o3 % Na2o % Sio2 % Fe2o3 % D50 A4m 99.8 0.1 0.05 0.02 3.1
Alumina (Al2O3), the industrial Al2O3 is prepared from alumina (Al2O3, 3H2O) and hard alumina, and the Al2O3, which is high in purity, is usually prepared by chemical methods. Al2O3 has many isomorphic crystals, and there are currently more than 10 known types, mainly three types of crystal, namely gamma-al2o3, beta-al2o3, alpha-al2o3.Which structure is different, with different properties in high temperature above 1300 s almost entirely into alpha Al2O3.
Bentonite as is a particular kind of clay derived from volcanic ash and consists mainly of montmorillonite with minor amount of illite, kaolinite, cristobalite and other minerals. Bentonite has strong colloidal properties and, when in contact with water, increases its volume several fold by swelling, forming a tixotropic, gelatinous substance. Main uses of Bentonite take advantage of these colloidal properties. The main characteristics of Bentonite is its decolorizing power, that is the property of the earth to absorb selectively certain pigments rather than others according to the characteristics of the product to be decolourized(acidity, oxidation degree, origin and biological state etc.)
APPLICATIONS
For Drilling Fluids
Pilling
Binder (e.g. foundry-sand bond, iron ore pelletizer)
Purifier
Electrical Earthing
Agriculture
Cosmetics, Paper, Paints and Ceramics
Absorbent (e.g. pet litter), and
As a Groundwater Barrier.
We CEMENTATION acquire own mines for Bentonite in India. We supply Bentonite for industrial, manufacturing, construction and drilling applications. Our production or supply capacity is more than 250,000 TPA.
At CEMENTATION a special attention is given while mining Bentonite as the materials physical and chemical properties are depended upon the interference of the other metal ions present in the soil.
Once the material sourced from mines are transferred to our factory and are left for drying in an open land to reduce moisture up to the desired level. After the drying process and other checks are done our skilled manpower will do a sorting of the material and then after the material goes to pulverizes for grinding to desired mesh size and are packed according to customers requirement. Our laboratories are well equipped to meet the needs of the diverse markets we serve.
About two thirds of chrome ore deposits are located in South Africa We bring the raw material reliably quickly and efficiently from Mozambique to the buyers destination We can guarantee you the highest product quality with the best service in procurement and logistics
