The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)
Used Rails shall be considered free of alloys when the residual alloying elements do not exceed
Cut to 1.5 meter length (standard)
1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
We supply 100% used engine oil /Used Engine Oil/Waste Engine Oil/UEO from vehicles, which are of higher quality and quantities at very good competitive prices, and we have the ability to supply up to 2500 MT per month, as we try to keep the quality at the highest in its grade.
Water : +/- 2%
Gross calorific Value : Min 10 000 Kcal
Sulfur content : Max 0.
Packaging & Delivery
Packaging Details: DRUMS or as per buyer's request
Delivery Detail: prompt delivery once order is confirmed
Specification:
Ash Content (mass %) 0.01
Free fatty acids 3 % Max
M.I.U(Moisture and Impurities) 0.1 % max
Saponification value: 18185-1955-195
Iodine value: 120
Titre C (melting point) 13.75 C
Specific Gravity a 25 C 0.915
Density (kg/m3) 920
Flashpoint by P.-M. (Degree C) 220
Calorific Value (kj/kg) 36,000
Used cooking oil, also known as waste cooking oil (UCO), refers to cooking oils and fats that have been utilized for frying or cooking in food preparation and have subsequently become unsuitable for further culinary use. It is often collected from households, restaurants, and food processing establishments as a byproduct of cooking processes. Recycling used cooking oil is an environmentally responsible practice, as it can be processed into biodiesel or used as an ingredient in animal feed, industrial applications, and even the production of soap and other products. Proper disposal and recycling of used cooking oil are important for reducing environmental pollution and promoting sustainability.
