Rebar Steel, Deformed Steel Rebar Iron Rods for Construction Concrete Rebar steel deformed steel rebar iron rods for construction concrete building Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:HRB335,HRB400 Diameter:5.5-250mm Length:6-12m Place of Origin: Thailand Model Number:Q235 Steel grade:ASTM, Q235,SAE1018,SAE1045,20#,45# etc Technique:Cold Drawn or Hot rolled available Surface:HRB400/500/ASTM/BS4449
Scrap Steel to be supplied under the present contract shall conform with the steel scrap specifications and standards of the Institute of Scrap Recycling Industries (ISRI) and SGS INSPECTION will be made at the discharge port after arrival of the vessel at the unloading port and shall be strictly limited to used rails and scrap steel to the standards specifically set out below: a) R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. b) R65: used long rail steel scrap in compliance with ISRI standard classification R65 (64.72 kg/m), in length 1 & 1,5meters on per bar basis, Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. c) Clean scrap without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine, vehicles, and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive or armor-plated materials, excess rust, corrosion, dust and dirt, mud or wastes and without any harmful impurities and totally free of radioactive contamination and poisonous material and any other materials exceeding the level accepted and allowed by international acceptable norms.
The chemical composition is the standard for R50 & R65 rails, original weight 50 pounds per yard or heavier, 6 meters long and over. Material to be suitable for re-rolling into bars and shapes. Free from bent and twisted Rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of a piece of rail. Free from fluff, non-ferrous inclusions excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances and coatings any organic waste, any other harmful substances. Dirt, dust, rust, fluff and other impurities not allowed over 5%. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.
We are looking for the buyer who interested to buy with the product "Iron Steel" . We are the supplier of Iron Steel, origin from Malaysia. - Guarantee Fe 80% - Monthly supply around 300 tons - FOB Port Klang : USD 330.00 - Size : 10mm-120mm
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Deformed bars 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 29mm, 32mm, 36mm, 40mm, 50mm , with length 12meters maximum 15meters
Ferrous metals â?? iron and its alloys (steels, ferroalloys, cast irons), account for more than 90% of the total volume used in the economy of metals, of which the main part is made up of various steels, steel tubes, steel coils, rebar, rubber. Ferrous metals are used to make railway rails, pipes for transporting oil and gas, metal scaffolding, anchors for swimming facilities, nails, needles, springs, and much more.
Think of the greatest structures of the 19th centuryâ??the Eiffel Tower, the Capitol, the Statue of Liberty and you'll be thinking of iron. The fourth most common element in Earth's crust, iron has been in widespread use now for about 6000 years. Hugely versatile, and one of the strongest and cheapest metals, it became an important building block of the Industrial Revolution, but it's also an essential element in plant and animal life. Combined with varying (but tiny) amounts of carbon, iron makes a much stronger material called steel, used in a huge range of human-made objects, from cutlery to warships, skyscrapers, and space rockets. Let's take a closer look at these two superb materials and find out what makes them so popular
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:CGCC Model Number:0.12-2mm*600-1500mm Type:Steel Plate/Coil Technique:Hot Rolled/Cold Rolled Surface Treatment:Galvanized&Coated Application:Building/Boiler/Container/Flange/Ship Plate Special Use:High-strength Steel Plate Width:600-1500mm Length:according customer's requirement Certificate:ISO 9001:2008/SGS/BV Delivery time:7-15 Days Coil Weight:3-5 Tons and custom Hardness:Soft-full Hard Quality:High Quality.SGS Inspection Color:RAL Colors and custom Zinc Coating:30-275g/m2 Price term:CIF CFR FOB EX-WORK
1- Iron used Pipes for sale, these pipes are charged every six months 2- these pipes are as follows: 1/ Pipes are 12 meters long * 50 inches in diameter * 0.5 meters in diameter. 2/ Pipes of 12 meters in length * 25 inches in diameter * 0.5 centimeters. 3/ Pipes of 12 meters * 20 inches in diameter * 0.5 centimeters. Pipes measuring 6 meters long * 6 inches * 0.5 cm thick. Pipes measuring 6 meters long * 5 inches in diameter * 0.5 centimeters thick 3-- quality is SSAW
Mixed iron - steel scraps This product is mixed iron and steel scraps extracted from the close iron ore mine in liberia and with other iron scraps we buy from the local people. The mixed iron and steel scraps are packed in 20 feet container for export.
Mixed iron and steel scraps This product is mixed iron and steel scraps extracted from the close iron ore mine in liberia and with other iron scraps we buy from the local people. The mixed iron and steel scraps are packed in 20 feet container for export.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Standard:AISI, ASTM, BS, DIN, GB Grade:Q235 Place of Origin:China Model Number:DFX-777032509 Type:Steel Plate, stainless steel sheet Technique:Cold Rolled, Cold Rolled Surface Treatment:Coated Application:industrial workshop, warehouse,garage Special Use:High-strength Steel Plate Width:470-1025mm Length:100-12000mm product name:steel sheet Steel frame surface:Galvanized and painting coated earthquake resistance:grade 10 width:840mm,900mm,750mm,820mm,950mm color:white grey, red, blue or as request use:wall and roofing cladding system using life:15 years Payment term:T/T;L/C
Standard:AISI, ASTM, BS, DIN, GB, JIS, EN, AS etc Grade:SGCC Model Number:Hot Dipped GI/Galvanized/Zinc Type:Steel Plate Technique:Cold Rolled Surface Treatment:Coated Application:Container Plate Special Use:High-strength Steel Plate Width:600-1500mm Length:Requirement, 1.8- 5meters or as client's request Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Surface:galvanized coating Coating:Z30-Z150 Spangle:reuglar spangle Thickness Tolerance:+/-0.02mm Width Tolerance:+/-2mm MOQ:25 Mt(one 20ft FCL) Surface treatment:chromated,passivation treatment,oiling Product Name:GI Steel Sheet Standard Size Of Lowes Corrugated Metal Roof
this is Jayant Huang from China We can offer the very low price cargo like : STEEL SCRAPE /IRON SCRAPR/METAL SCRAPE FOB Shenzhen : Iron scrap $5100/20GP 26Ton per 20GP
Size: 0.6mm-5.5mm Zinc coating: 30g-366g/m2 Tensile strength: 350-1500n/mm2 Packing: 25kg-800kgs per roll 25kg-800kgs per coil Plastic inside and woven bag or hessian outside
ItemProductSurface hardnessCore hardness 1High chrome cast grinding media Hrc 58-65More than hrc 55 2Low chrome cast grinding media Hrc 48-55More than hrc 46 3Medium chrome cast grinding mediaHrc 50-60More than hrc 48 4B2 forged grinding mediaHrc 58-65More than hrc 55 5B3 forged grinding mediaHrc 58-65More than hrc 55 6Bu forged grinding mediaHrc 58-65More than hrc 55