PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.
MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly.
Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure.
Car intake air temperature sensor (IATS)
Automotive coolant temperature sensor (CTS)
automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS)
car was NTC thermistor / temperature sensor
Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions.
Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly.
Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure.
Car intake air temperature sensor (IATS)
Automotive coolant temperature sensor (CTS)
automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS)
car was NTC thermistor / temperature sensor
Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions.
Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes. When the engine coolant temperature gradually increased, Thermistor resistance will gradually decline, On the contrary increases, when the engine coolant temperature changes, the output voltage of the sensor also changes accordingly.
Engine coolant temperature sensor elongated head contact with the cooling liquid, the temperature of the coolant is detected by the change of the resistance value, and this signal is sent to the ECU,Used to detect the engine coolant temperature. The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure.
Car intake air temperature sensor (IATS)
Automotive coolant temperature sensor (CTS)
automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS)
car was NTC thermistor / temperature sensor
Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions.
Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
Food meat smoker oven machine cooking ,drying ,baking ,fumigation ,exhaust,cleaning and other functions.
The fast and slow cycle procedure can be selected according to the process requirements to achieve the best cycle and smoke effect .2.can monitor the smoke temperature,prevent the temperature is too high ,safe and sanitary .3.various types of temperature sensors are available for users to choose. 4.add water circulation cleaning device .
capacity 50-1000kg
10620 Digital Humidity And Temperature Sensor Htu21D Suppliers
Short on time? Let Digital Humidity And Temperature Sensor Htu21D sellers contact you.
2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
1000 g Walnut kernels contain:
50 % 1/2 Kernels (Light)
30 % 1/4 Kernels (Light)
20 % 1/8 Kernels (Light)
100 % Mahogany mixed kernels
Packing - 10 kg carton boxes.
Shell and Foreign Material (by weight) - 0.05% maximum
Fairly uniform in color, matches the Bulgarian Walnut
Color Chart classification for â??lightâ??
Total Defects (by weight)- 5 % maximum
For maximum shelf life, store at refrigerated temperatures
below 2�° C and maximum relative humidity of 55%
Composition per 100 g of Walnut Kernels
Calories - 851
Protein - 14.8%
Fat - 60%
Carbohydrates - 16
Crude fiber - 9.6%
Vitamins
Vitamin A - 0.6
Thiamine, B1 - 24
Riboflavin - 8.21
Vitamin C - 4.4
1000 g Walnut kernels contain:
50 % 1/2 Kernels (Light)
30 % 1/4 Kernels (Light)
20 % 1/8 Kernels (Light)
100 % Mahogany mixed kernels
Packing - 10 kg carton boxes.
Shell and Foreign Material (by weight) - 0.05% maximum
Fairly uniform in color, matches the Bulgarian Walnut
Color Chart classification for â??lightâ??
Total Defects (by weight)- 5 % maximum
For maximum shelf life, store at refrigerated temperatures
below 2�° C and maximum relative humidity of 55%
Composition per 100 g of Walnut Kernels
Calories - 851
Protein - 14.8%
Fat - 60%
Carbohydrates - 16
Crude fiber - 9.6%
Vitamins
Vitamin A - 0.6
Thiamine, B1 - 24
Riboflavin - 8.21
Vitamin C - 4.4
1000 g Walnut kernels contain:
50 % 1/2 Kernels (Light)
30 % 1/4 Kernels (Light)
20 % 1/8 Kernels (Light)
100 % Mahogany mixed kernels
Packing - 10 kg carton boxes.
Shell and Foreign Material (by weight) - 0.05% maximum
Fairly uniform in color, matches the Bulgarian Walnut
Color Chart classification for light
Total Defects (by weight)- 5 % maximum
For maximum shelf life, store at refrigerated temperatures
below 2 C and maximum relative humidity of 55%
Composition per 100 g of Walnut Kernels
Calories - 851
Protein - 14.8%
Fat - 60%
Carbohydrates - 16
Crude fiber - 9.6%
Vitamins
Vitamin A - 0.6
Thiamine, B1 - 24
Riboflavin - 8.21
Vitamin C - 4.4
1000 g Walnut kernels contain:
50 % 1/2 Kernels (Light)
30 % 1/4 Kernels (Light)
20 % 1/8 Kernels (Light)
100 % Mahogany mixed kernels
Packing - 10 kg carton boxes.
Shell and Foreign Material (by weight) - 0.05% maximum
Fairly uniform in color, matches the Bulgarian Walnut
Color Chart classification for light
Total Defects (by weight)- 5 % maximum
For maximum shelf life, store at refrigerated temperatures
below 2 C and maximum relative humidity of 55%
Composition per 100 g of Walnut Kernels
Calories - 851
Protein - 14.8%
Fat - 60%
Carbohydrates - 16
Crude fiber - 9.6%
Vitamins
Vitamin A - 0.6
Thiamine, B1 - 24
Riboflavin - 8.21
Vitamin C - 4.4
DT-625 Humidity & Temperature Meters Description
DT-625 is digital Humidity & Temperature Meter with Wet Bulb Temperature & Dew Point temperature, which has been designed to combine the functions of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point temperature. It is an ideal Humidity & Temperature Meter with scores of practical applications for laboratorial, industrial, Engineer and professional use.
Large, easy-to-read backlit LCD with dual display;
Fast Response Time: 10s (90% at 25C still air) 2% High Accuracy (625);
Dew Point Temperature (-30C~100C/-22F~199F) (625)
Wet Bulb Temperature (0C~80C/32F~176F) (625);
Resolution 0.1%RH, 0.1C/0.1F
Max/Min Hold and Data Hold Function (625);
Microprocessor-based Design (625)
Dual Display Temperature & Humidity
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly.
Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 , C to 120 , C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure.
Weichai water temperature sensor 612600090673/612600090673
Dongfeng Tianlong, day Kam water temperature sensor water temperature plug / 0281002209 / D5010412450
Weichai Europe three cooling water temperature sensor 612600090919/612600090919
Nanchong natural gas engine 36.2D-02012 water temperature sensor assembly (ECU) / 36.2D-02012
FAW Xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010
Dongfeng warrior accessories EQ2050 - water temperature is too low / too high sensor / 3839C21-010
Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627
Natural gas engine water temperature sensor 3602160-55D
Heavy Duty Hau Wo LNG Natural Gas Engine Cooling Water Temperature Sensor / R61540090004
Weichai WP10 water temperature sensor 612600090358
Nanchong natural gas engine water temperature sensor 36.2D-02012 / 36.2D-02012
Weichai engine country 3 EFI cooling water temperature sensor 612630060035
Chongqing Cummins engine M11 water temperature sensor 4921477 Shiyan Auto Parts City / 4921477
MAKEND�° CBS 355E is a hydrogenated and fractionated Palm Kernel Oil based Cocoa Butter Substitute (CBS) with very sharp melting profile thus providing excellent mouthfeel.
PACKING:
20kg or 25kg cartons with PE liners.
SHELF LIFE:
Shelf life 12 months from date of manufacture, provided, product is stored in original unopen packing in a cool, dry and odour free area with ambient temperature not above 20�°C and below 60% relative humidity.
Cocoa butter substitutes (CBS) are vegetable fats used to replace cocoa butter in chocolate and confectionery products. They are typically made from lauric acid oils like coconut or palm kernel oil. A key specification for CBS is that they are not compatible with cocoa butter and are used to completely replace it. Specifics include a slip melting point of 33-35�°C, a maximum iodine value of 1.0, and a maximum free fatty acid content (as lauric acid) of 0.1%.
Physical and Chemical Properties:
Slip Melting Point: The range is typically 33-35�°C.
Iodine Value: A maximum of 1.0 (Wijs) is generally specified.
Free Fatty Acid (FFA): Maximum of 0.1% (as lauric acid).
Moisture and Impurities: A maximum of 0.1%.
Saponification Value: Typically between 240 and 260.
Color: Can be white or pale yellow.
Appearance: Should be white or pale yellow with a bland flavor and no odor.
Solid Fat Content: While not a universal specification, some patents mention solid fat content at various temperatures, for example, 35-60% at 10�°C, according to WO2013132284A1.
Isolated Soy Protein, CAS no.9010-10-0, is manufactured from high quality Non-GMO soybean, available as yellow or milk white powder. It has excellent dispersibility, a high viscosity. Isolated Soy Protein is used in high protein beverages, infant formulas, cereals, nutritional bars, meat products, low-temperature barbeque products, reformed cheese, sausages, fish food, and frozen food.
As an experienced Isolated Soy Protein manufacturer and supplier, we has been supplying and exporting Isolated Soy Protein for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Isolated Soy Protein Specification
SOY PROTEIN ISOALTE (Emulsion Type) is our new special designed soy protein isolate with higher viscosity and stronger emulsification, it can help meat processors to achieve higher emulsification requested and higher water binding to reduce the cooking loss and prevent fat loss and improve the structure of final products in a cost effective way.
Physical Characteristics
Protein(in dry basis N 6.25 mfb) 90% min
Moisture 7% max
Ash 6% max
Crude fiber 0.5% max
Fat 0.5%max
PH 7.3 ± 0.5
Colour light
Flavour neutral
Typical Bacteriological Analysis
Standard plate count 20,000/g max Coliforms 100/g max
E Coli (in 0.1g) negative Yeast and mould 100/g max
Salmonella (in 25g) negative
Particle Distribution (Typical Analysis)99% through 100# U.S. standard screenHeavy Metal Analysis
lead 1.0 mg/kg max
Arsenic 0.5 mg/kg max
Packing: 20kg net weight, paper/plastic bag poly-lined.Storage: below 75â?? and 60% relative humidity promotes longer shelf life.Certificate: BRC, HACCP, ISO9000, ISO22000, IP, Kosher & Halal certificatedShelf life: one year.
2.Features:
¨® led displays measuring temp.Values, clear, direct and not affected by the ray.
¨® inlaid panel, 220vac power supply, easy to install.
¨® wide temp, measuring range and high accuracy.
10620 Digital Humidity And Temperature Sensor Htu21D Suppliers
Short on time? Let Digital Humidity And Temperature Sensor Htu21D sellers contact you.
