YAMAHA OUTBOARD ENGINES
HS Code 840820
PRICE = US$2,000/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama.
Electric-Drive Technical specs
Amp Draw 42
Voltage 12
Mount Feature Lever lock
Max Thrust (kg) 18.2
Speeds (FWD/REV) 5 FWD/3 REV
Digital Maximizer False
Shaft Length 914 mm
Battery Meter False
Control Telescoping Tiller
A unique copolymer warp yarn sizing agent for Cotton, Rayon, Modal Polyester and Blends of Polyester/Cotton/Viscose Spun yarns. Heavy fabric constructions are easier to weave at low size add-on using SizeMagik-LP4. Low add-on also permits greater protection on high speed looms expensive reeds and sensitive mechanical parts life. Better film properties of the product provide the lower warp breaks and it improve the finished products quality. Reduced dropping level in sizing and weaving it provide more comfortable working conditions and reduce maintenance cost.
Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.
SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................
33302 Engine Parts Speed Controller Ot2022 Suppliers
Short on time? Let Engine Parts Speed Controller Ot2022 sellers contact you.
Fashion Water Sport 20HP 30HP Yam aha Boat Engines New Outboard Motor
Many types of sport fishing boats using yam aha outboard motor. This four stroke engine with excellent fuel economy and clean emission performance. The high-powered outboard engine is equipped with a high-performance fuel nozzle, further enhancing its overall performance. The four stroke engine with advanced technology has excellent acceleration performance.
Engine type:4 stroke/4 cyl
Weight:36-58KG
Control typeremote
Fuel:Gasoline
Fashion Water Sport 20HP 30HP Yam aha Boat Engines New Outboard Motor
Many types of sport fishing boats using ya maha outboard motor. This four stroke engine with excellent fuel economy and clean emission performance. The high-powered outboard engine is equipped with a high-performance fuel nozzle, further enhancing its overall performance. The four stroke engine with advanced technology has excellent acceleration performance.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT
DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life.
SPECIFICATIONS
1. Appearance: Off white Granules
2. Solubility: Soluble at 800C
3. Viscosity of 4% solution: 10 to 30 cPs
(Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc)
4. Ash content (w/w) : Max 3%
5. Bulk density (gm/ml) : 0.65 to 0.85
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually sprinkle SizeMagikTM-LP4.
3. Add the required quantity of softener.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
ECONIMICAL ADVANTAGES
Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
Technical applications
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.
MATERIAL: PC regrind mixed color
CATEGORY: PC
TYPE: egrind
GRADE: mixed color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 900$ - 1100$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.
MATERIAL: PC regrind natural color
CATEGORY: PC
TYPE: regrind
GRADE: natural color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1200$ - 1400$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PC-GF 20% regrind black color - Origin Japan has been processed into plastic particles, which are very convenient for transportation as well as in the recycling process to create new products. We always provide the same products as reality, and we use 100% real images.
Technical applications
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.
MATERIAL: PC-GF 20% regrind black color
CATEGORY: PC-GF 20%
TYPE: regrind
GRADE: black color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 600$ - 900$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
POM Regrind from zipper Teeth, industry lump, industry runner
Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.
One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.
MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Description by Manufacturer
ENGINE
Engine Type V6
Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm)
Displacement 186 CID (3,046 cc)
DIMENSIONS
Shaft Length 25 in. (635 mm)
Weight 528 lb. (240 kg)
GENERAL
Propshaft Horsepower 175 HP (131 kW)
Full Throttle Operating Range 5000-6000 RPM
Gear Ratio / Shift F-N-R
Cooling Water-cooled with thermostat & pressure-controlled
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
KEY FEATURES
Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
Built for the podium and bred to win, the 2020 GP1800R is back and faster than ever.
Since its release in 2017, the Yamaha GP1800R SVHO has completely dominated the Australian and World Pro Stock race scene. Pro Stock racing, also known as the â??Manufacturers Classâ??, provides the best comparison of out-of-the-box performance of each manufacturers race ski offerings.
From short course to long distance offshore endurance racing, no other watercraft model has achieved as many victories as the GP1800R SVHO over the last three years.
Engine Type: 4-stroke, 4-cyl DOHC, 16-Valve, Super Vortex High Output Marine Engine
HIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Specification
Product
Authentic Product
Safe Packaging
Shock-Resistant - Three layer of packaging
Accessories
Comes with complete accessories in Original Box
Items
Original
Packing & Delivery
SHIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
SHIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Specification
Product
Authentic Product
Safe Packaging
Shock-Resistant - Three layer of packaging
Accessories
Comes with complete accessories in Original Box
Items
Original
Packing & Delivery
SHIPPING AND DELIVERY :
* We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep.
* Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures.
* We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount.
* Tracking number is issued immediately after shipment is done..
Payments
How To Order ?
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
Step 1 : Please tell us what model and quantity you need.
Step 2: We will make an Order Invoice for you to confirm the order details.
Step 3: When we confirm everything, You proceed with the payment arrangement.
Step 4: Finally we deliver the goods within the stipulated time.
FAQ
Q1: Can you accept small orders?
A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future.
Q2:.What's your payment terms?
A: We accept Bank , Alibaba Payment
Q3: What are the shipment terms ?
A: Express( DHL, FEDEX, TNT, UPS).
-- Takes 3-7 Days express delivery after receipt of payment.
-- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
33302 Engine Parts Speed Controller Ot2022 Suppliers
Short on time? Let Engine Parts Speed Controller Ot2022 sellers contact you.
