Find Verified Metal Powder Suppliers, Manufacturers and Wholesalers

Product Description -
Offering best drill collars for drilling operations in oil and gas extraction (Slick and spiral Drill Collars, with slip and elevator recesses according to customer's request).

Product origin -
Sumy, Ukraine - UA

Key Specifications/Special Features -
Certification and standards: API Spec 7-1, API Spec 7-2, Q1 and ISO 9001, ISO 29001 and NS-1
Slick and spiral Drill Collars, with slip and elevator recesses according to customer's request
Steel grade: AISI 4145H mod, fully heat treated as per API Specification
At customer request it is possible to produce Drill Collars from non-magnetic and H2S resistant steel grades
Technical parameters
OD: from 79,4 mm (3 1/8) up to 279,4 mm (11)
Length: 8300 mm, 9145 mm and 9450 mm, at customer request the length can vary from 6500 mm up to 12500 mm
Standard API and double shouldered thread connections are made with stress relieved elements, cold rolled and phosphated, and equipped with pressed steel or heavy duty plastic thread protectors at both ends
Hard banding of ARNCO 350XT, Castolin OTW 13CF, tungsten carbide
Ultimate tensile strength: min 140 000/965 ksi/mPa, Yield strength: min 110,000/758 ksi/mPa, Elongation: 15%, Impact strength: min 48J, Brinell hardness: min 285-341 HB
Mechanical properties guaranteed to 1 below steel surface.

Product Description -
Our products include Slick and Spiral exclusively forged HWDP (not welded or hot rolled material).

Product origin -
Sumy, Ukraine - UA

Key Specifications/Special Features -
Certification and standards: API Spec 7-1, API Spec 7-2, Q1 and ISO 9001, ISO 29001 and NS-1
Slick and Spiral exclusively forged HWDP (not welded or hot rolled material)
Type I / Type II with one or two central upsets, Type III Spiral with one central upset
Steel grade: AISI 4145H mod, fully heat treated as per API Specification
At customer request it is possible to produce HWDP from non-magnetic and H2S resistant steel grades
Technical parameters
OD: from 88,9 mm (3 1/2) up to 168,3 mm (6 5/8)
Standard length: 8300 mm, 9450 mm, 12250 mm, 12500 mm
Standard API and double shouldered thread connections are made with stress relieved elements, cold rolled and phosphated, and equipped with pressed steel or heavy duty plastic thread protectors at both ends
Hard banding of ARNCO 350XT, Castolin OTW 13CF, tungsten carbide
Ultimate tensile strength: min 140 000/965 ksi/mPa, Yield strength: min 110,000/758 ksi/mPa, Elongation: 15%, Impact strength: min 48J, Brinell hardness: min 285-341 HB
Mechanical properties guaranteed to 1below steel surface.

Talc Grades Lump and Powder with whiteness 95% to 98%.(Asbestos free)

Test report available on request.

Packing: Bulk 1 Ton Jumbo Bags

Canned Chickpeas With Tomato Sauce :

Chickpeas (45%), water, sunflower oil, tomato paste, potatoes, onions, carrots, salt, dill, red pepper powder

Tomato powder 80 - 120 mesh - China / India
Tomato flakes about 9 x 9 mm - China
other cuts / sizes on request

MULTIPLE USES: Simple look is suitable for artificial flowers or real plants like daisy, rose or any wild grass and flowers.
Color: Gold ,
Size: 14x24cm/5.51x9.45inch
HIGH QUALITY MATERIAL: Transparent glass tube terrarium with modern geometric design metal stand to make your plants look more beautiful

Tempered glass and Robust Metal Frame. Achieving a modern taste of look that will go well with a variety of Home Decor.
It can be used as dining table, coffee table, snack table, side table, reading table in home and office.
With the smooth surface, you can easily clean the coffee table with a soft damp cloth.

This is a metal fencing material woven into a zig-zag pattern. smooth galvanised chain-link is designed to withstand rust and any other forms of corrosion. chain-link fencing is ideal for establishing or preventing entry or exit points on property, as well as cages, pens and holding areas for livestock.

AVAILABLE IN
11.5 and 12. inches gauges

Women's Loose Oversize Motorcycle Leather Jacket

Collar: Lapel collar

Hooded: No hooded

Suitable generation: 25-29 years old

Belt option: Yes

Sleeve Length: Long sleeves

Leather: Sheepskin

Color: Metal Silver

Size: S,M,L,XL

Item code: FLJ-10

Thallius

Type C-H

80 X 80
80 X 80
90 X 90
100 X 100

8 mm tempered glass
Brass profiles
Brass hinges
Metal handle
Easy clean
Easy installation
Hidden screw design
25 mm adjustment for uneven walls

Thallius

Type G-H

80 X 80
80 X 80
90 X 90
100 X 100

8 mm tempered glass
Brass profiles
Brass hinges
Metal handle
Easy clean
Easy installation
Hidden screw design
25 mm adjustment for uneven walls

ATMP has excellent chelation, low threshold inhibition, and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water systems. ATMP has good chemical stability and is hard to hydrolyze in water systems. At high concentrations, it has good corrosion inhibition.

ATMP is used in industrial circulating cooling water systems and oilfield water pipelines in thermal power plants and oil refineries. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipelines. ATMP can be used as a chelating agent in weaving and dyeing industries and as a metal surface treatment agent.

The solid state of ATMP is crystal powder, soluble in water, and easily deliquescent, suitable for use in winter and freezing districts. Because of its high purity, it can be used in weaving & dyeing industries and as a metal surface treatment agent.

ESWECO is renowned for (Metal) cutting tools and is committed to providing the highest cutting performance and most productive cutting solutions in the market.

ESWECO has a powerful product range of abrasive cutting and grinding discs.

Bonded abrasives from ESWECO have been designed to make your work easier, quicker, and more efficient.

No matter whether you are looking for grinding and cutting discs, cup wheels, or grinding rings quality is always our priority.

Excellent cutting performance, low vibration while cutting, and minimum wear of the discs to secure a long product life and low-cost impact.

Our cutting and grinding discs follow the highest safety requirements in the market.

The range full fills in discs suitable for all steel materials and a wide variety of stone-based building materials.

They can be used to cut workpieces made of metal, stone, and stainless steel.

Fil is a suspended luminaire composed of metal frame and cotton thread. The frame also houses a filament bulb inside. The luminaire is available in three sizes of 400mm, 600mm and 800mm in diameter. Cotton threads are availabe in different colors based on RAL color standards.

Electrical
Input Voltage

230 - 240 AC 50Hz

Control

Switch

Connection

Plug-in Type Pre-wired

General Characteristics
Appliance Class

Class 2

Ingress Protection

IP40

Photobiological Safety

RG 0 - No Risk

Ambient Temperature

0 to +50 C

Luminaire
Housing Material

Metal frame & thread

Environment

Indoor

Mounting

Suspended

Light Distribution

Direct

Body Finish

Cotton Thread

Thermal Management

Passive Cooling

Light Source
Lamp

Filament Bulb

Color Temperature

3000K / 6500K

Size And Wattage - 400-10W
600-15W
800-15W

Tred is a suspended luminaire composed of metal frame and cotton thread. The frame also houses a filament bulb inside. The luminaire is available in three sizes of 300mm, 450mm and 600mm in diameter. Cotton threads are availabe in different colors based on RAL color standards.

lectrical
Input Voltage

230 - 240 AC 50Hz

Control

Switch

Connection

Plug-in Type Pre-wired

General Characteristics
Appliance Class

Class 2

Ingress Protection

IP40

Photobiological Safety

RG 0 - No Risk

Ambient Temperature

0 to +50 C

Luminaire
Housing Material

Metal frame & thread

Environment

Indoor

Mounting

Suspended

Light Distribution

Direct

Body Finish

Cotton Thread

Thermal Management

Passive Cooling

Light Source
Lamp

Filament Bulb

Color Temperature

3000K / 6500K

Size And Wattage - 300-10W
450-10W
600-15W

Quality indicators of high grade flour
Moisture : 14,4 %;
Whiteness : 58 %;
Ash : 0,44 %;
Number of falls : 410 sec;
The remainder on the sieve 49/52 : 4.0 %;
Starch: 50 %;
Gluten-free :
- Quantity 26 %;
- Quality 65 conditional units;
Color native;
Taste native;
Smell native;
Mineral admixture no;
Metal-magnetic admixture remaider;
Infection and contamination not detected.

Quality indicators of first grade flour
Moisture : 14,4%;
Whiteness : 43%;
Ash : 0,70%;
Number of falls : 400 sec;
The remainder on the sieve 33/36 - 05%;
The remainder on the sieve 49/52 - 90%;
Gluten-free:
- Quantity 28%;
- Quality 85 conditional units;
Color native;
Taste native;
Smell native;
Mineral admixture no;
Metal-magnetic admixture remaider;
Infection and contamination not detected

Packing in bags of 25 and 50 kg. in containers

AV-15,16
H/P Wafer 20K

+ Type of body: Wafer
+ Flange : ANSI 300

+ Material :
- Body : Ductile iron, Cast steel
- Stainless steel (304, 316)
- Disc : Stainless steel (304, 316 & 316L)
- Stem : Stainless steel (304, 316, 316L & 630)
- Seat ring : EPDM, PTFE, RTFE, Metal

+ Face to face dimension :
- ISO 5752, API 609, MSS SP-68, DIN 3203 / K1 (Short)

+ Top flange dimension : Bolt hole to ISO 5211
+ Stem dimension : Square drive to ISO 5211
+ Double eccentric (offset) disc
+ Vacuum equipment (up to 10-5 Torr)
+ Max.Temperature :
- EPDM : -20 c to +120 c
- PTFE : -60 c to +160 c
- RTFE : -60 to +200 c
- Metal : -120 to +450 c

+ OPTION
- Lugged body
- Long bonnet

AVP-15(D,S)
H/P 10K, Pneumatic

+ Type of body: Wafer
+ Flange : JIS 10K/20K, ANSI 150LBS
+ Face to face dimension: ISO 5752
+ Top flange dimension: Bolt hole ISO 5211
+ Stem dimension : Square drive to ISO 5211

+ Double eccentric (offset) disc
+ Material :
- Body : Ductile iron, Cast steel
- Stainless steel (304, 316)
- Disc : Stainless steel (304, 316 & 316L)
- Stem : Stainless steel (304, 316, 316L & 630)
- Seat ring : EPDM, PTFE, RTFE, Metal
+ Vacuum equipment (up to 10-5 Torr)
+ Max. Temperature :
- EPDM (-20 c to +120 c)
- PTFE (-60 c to +160 c )
- RTFE (-60 c to +200 c)
- Metal (-120 c to +450 c)

+OPTION
- Lugged body
- Long bonnet

Features
Healthy and non-toxic, free of stain and scale.
High temperature resistance (maximum water temperature up to 90) and pressure resistance (over 5MPa).
Hot melting connection makes the pipes and fittings into on body, so leakage is effectively prevented.
Excellent heat-insulation property from minimum thermal conductivity (only 1/200 of that of metal pipes).
Light weight (approximately 1/8 of weight of metal pipes), easy to handle and transport.
Smooth inner walls reduce the pressure loss and increase the flow speed.
Low noise (reduce by 40% compared to galvanized steel pipes).
Soft colors and excellent design are suitable for installation either exposed or hidden.
Excellent ability in chemical corrosion resistance.
Easy and fast installation minimizes your cost.
Over 50 years of service life under normal condition.

Function traits:
* One key sterilization.
* LK/MJG-50, LK/MJG-100
* Low Temperature: í_ 50oC
* Fast: 31-55 minutes.
* Wide spectrum: Compatible to 95% instruments.
* Safe: Byproducts are just water & oxygen.
* Low Price: Low unit price and consumable price.
* Applicable to heat/moisture sensitive instruments.
* No extra enhancer needed.
* No erosion to instruments.
* Instruments can be used right after sterilization is finished.
* Long distance operation/monitoring (optional).
* Build-in biological incubator (optional).
* Foot door switch (optional).

Application scope:
Metal instruments: stainless steel, aluminum, bronze, titanium, etc.
Non-metal instruments: glass, plastic (poly-acetyl, ethenyl, styrenepolymers, polycarbonate, ethylene resin, poly methyl methacrylate, non-woven fabrics, polyurethane, polyvinyl chloride, nylon).