Find Verified Metal Wire Suppliers, Manufacturers and Wholesalers

Welded mesh fabric

Welded mesh fabric used for the reinforcement of concrete is manufactured to international standard specifications.

Features:

1welded mesh reinforcing sheets are the most commonly used form of reinforcing in concrete and is particularly suited for flat slab construction and concrete surface beds. Other design applications would be:
Retaining walls
Shear walls
Beams and columns.
Concrete paving overlays
Suspended floor slabs
Swimming pool and sp rayed concrete reinforcing

2welded mesh sheets can be detailed as either flat or bend sheets depending on the contract requirements.

3welded mesh sheets can be fabricated to non-standard sizes depending on contract requirements.

4welded mesh reinforcement reduces construction time considerably by eliminating the tying of reinforcing bars on site.

5designated fabric mats are standard welded reinforcing sheets and can be scheduled simply by reference to the fabric type, sheet dimensions and in instances where bend material is required the bending shape code. (the reference is the nominal mass of the fabric in kg/m x 100)

6the cold-rolled deformed wire used in welded mesh reinforcement fabric has a minimum characteristic strength (0.2% proof stress) of 485 mpa compared to 450 mpa for high tensile rebar. Reinforcing fabric may be used at higher stresses than high tensile rebar resulting in material saving of up to

Galvanized hardware cloth

Hardware cloth is a hot-dipped galvanized woven or welded mesh. It has a light gauge (usually between 2 and 8 mesh). Heavy zinc coating provides maximum protection and extra durability. Hardware cloth has an unlimited number of applications around the home, business, or farm.

Hardware wire mesh benefits:
Easy to install
Attractive
Durable
Weather proof
Rust resistant
Long lasting
Light wire dia meter yet good stability

Galvanized hardware cloth, or hardware cloth as it is sometimes referred to, is one of the most common and recognizable categories of wire mesh. Because hardware mesh is extremely versatile and attractively priced, it is used in thousands of different applications. Aside from its adaptability and price point, another benefit of hardware cloth is that, due to its zinc coating, it is corrosion resistant and will have a longer life than a comparable plain steel wire mesh.

Application:
Building and construction: general contracting, insulation, ventilation, hvac applications, gutter guards & roofing, soffit screen, and in stucco, ceilings, and tile installation
Outdoor uses: protective fencing for construction areas, gardening, greenhouses, compost bins, planters, fencing and enclosures, and chicken coops
Pest or varmint control: protect against rats, mice, raccoons, gophers, snakes and other nuisances
Household uses: baskets of many sizes and cabinet facing
Unique industries: archaeology, beekeeping. Bakeries, fishing and tractors, commonly use galvanized hardware cloth when a specific opening size is needed
Hardware supply and retail centers

Double Twist Hexagonal Mesh

Product Description:
Double twisted hexagonal steel wire mesh is available galvanized or galvanized with PVC sheets. PVC mesh is available in a variety of colors.
Due to the characteristics of the double twist, the steel wire double twist mesh can withstand the force of the falling rocks without unraveling in the event of wire breakage. The double twist mesh is anchored at the top of the slope with a trench at the bottom to collect the debris. Encapsulating vegetative soil pockets under the drapery system permits the establishment of vegetation if conditions permit.

Galvanized Hexagonal Wire Mesh Heavy Type: Made with high quality low-carbon steel wire to weave, steel wire tensile strength is 38kg/m2. The wire diameter may reach 2.0mm-4.0mm. The steel wire is usually galvanized. And the galvanizing layer thickness can be made according to the customer request. Max. galvanizing quantity can be 300g/m2.

PVC Coated Hexagonal Wire Mesh Heavy Type: PVC coated hexagonal Mesh is made of PVC coated wire that offers longer service life and better anti corrosion property.

Materials:mild steel wire, stainless steel wire, PVC wire, etc.

Advantages of double twist mesh:
Double Twist Mesh does not unravel should one of the wires fail
High tension and punching stress resistance

Maximum continuity at joints without the need to overlap mesh panels
Low installation costs

Perforated steel panels

Materials: iron plate or steel plate
Uses: perforated steel panels are widely used in the core of filter, medicine, filtering, breeding, battery, mechanical protecting, making the crafts, the meshes for the high-grade sound box, decoration, the seating for children, baskets, etc.

Specification of steel panels:
(1)cold rolled steel sheet
Thickness:0.2mm-1mm
Length:1m-20m
Hole diameter:0.8mm-10mm
(2)plate
Thickness:0.3mm-10mm
Size:, 1.5, 3m
Hole diameter:0.8mm-100mm

Anping Tenglu Metal Wire Mesh Co.,LTD

AISI316 Marine Grade Stainless Steel Security Door Screens

Product Description:
Security door screens are produced by high tensile AISI316 marine grade stainless steel wire, the wires' tensile strength is more than 900 MPa (900 N). Marine grade steel mesh screen was coated with black polyester powder (also named epoxy powder coating)

Materials:SS316

Feature:
Not easy to cut and break.
Square holes with strong wire and not sliding.
Black polyester powder cuts down light reflection allowing clear visibility in room and anti-peep.
Flat and straight surface.
Meet Australia standard.

Anping tenglu metal wire mesh co., ltd

Perforated filter tube

Perforated metal can be fabricated into the tube filters of various sizes.
Different from other wire mesh filter, perforated filter tube is made of perforated metal mesh with a wide range of perforated patterns and open area percent.

Perforated filter tube is made of galvanized, stainless steel, aluminum, alloy plate which is perforated with different hole size and various shaped holes on it, for instance round hole, square hole, oval holes, rectangular hole and hexagonal hole. Then the plate is shaped into a semicircle, and the end semicircle plate is welded durably with another semicircle together. The perforated filter tube is usually used as the core of filter for filtration.

We can provide perforated tubes in variou s hole shapes, . Because of its perforated structure, this type of filter can offer superior resistance to bending and crimping. So it is the ideal choice to be used where need rigidity and durability.

Specification:
Material: stainless steel mesh, hastelloy, mild steel.
Hole type: round hole, elliptical hole, square hole, rectangular hole, hexagonal hole.
Thickness: 0.5 mm to 10 mm.
Diameter: 6 - 169 mm.
Filter precision: 2 - 2000 �m.
Packing: wooden boxes.

Features:
Flat and smooth surface.
Durable and good strength.
Hard wearing, and easy to wash for reuse.
High dirt holding capacity.
Anti-acid, anti-alkali and anti-corrosion.
High reliable standard specifications.

Anping Tenglu Metal Wire Mesh Co.,LTD

Welded Steel Bar Grating

Welded steel bar grating is the most popular of all grating types due to its strength, cost-efficient production and ease of installation.

Steel bar grating costs less time and labor in work. It saves about 50 to 70 percent work time compared with common binding wire mesh. The use of bar grating can also strengthen the concrete parts to reduce surface breaking ratio. Welded bar grating for reinforcement is especially suitable for big area concrete engineering. Using of welded bar reinforcement can save about 10 percent of the total cost of the project.

It is also ideal for use as mezzanine decking since it supports the same loads as comparable solid flooring.More than that, its cost saving openness maximizes the circulation of air, light, heat, water and sound, while
promoting cleanliness. And, where insurance codes permit, additional sprinklers can often be eliminated.Standard panels are available in widths of 2', 3' or 4'.

Welded steel bar grating is resistance welded to create a rugged, one piece constructed panel. The bearing bars are automatically resistance welded at the contact point with the cross bars and, under a combination of high heat and pressure, are fused together to form a permanent joint.The cross bars provide a high degree of rigidity, yet retain a smooth flat surface for free and easy walking.

Welded steel bar mesh panels have three types: black steel bar welded wire mesh, galvanized steel bar welded wire and hot dipped galvanized steel bar welded wire mesh.

Welded steel bar panels are widely used in making of floors, ceilings, wall body, concrete road, bridge surface, airport, tunnel lining, concrete piping, etc.

Specification:
Wire Diameter: 5-16mm.
Horizontal Spacing: 50.100.200.300.400mm.
Vertical Spacing: 50-600mm.
Panel length:1000-14000mm.
Panel width:100-300cm

Anping tenglu metal wire mesh co.Ltd

Brick mesh

Brick mesh is a kind of mesh panel dedicated for concrete and it can be divided into two types, one is welded cold-drawn low carbon steel wire and the other is galvanized after welded.

Brick mesh is widely used in the large-area plastering engineering as the plastering underlay, in order to avoid cracking and resist vibrations. The column is made of concrete and has low costs, low intensity and and high stability. The colored coating is corrosion resistant and decorative impression. The brick mesh looks harmonious and beautiful. It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry w all construction

Anping tenglu metal wire mesh co.Ltd

Multi-layer filter piece

Multilayer filter mesh, is stamped by the filter net, compared with single-layer filter film, made of the same or different pieces of single layer filter.

Material: in addition to the standard material is sus304 (aisi304), sus316 (aisi316), sus316l (aisi316l), can also be customized for clients of hastelloy, monel, inconel and other special alloys.

Weaving: plain weave, twill weave, plain weave, twill weave, holland holland holland knitting five reverse.

Characteristi cs: large mesh filt er precision, high strength, easy to clean, easy to replace, high temperature resistance, corrosion resistance, easy processing, low cost.

Category: single mesh sheet according to the material and shape of the distinction, such as multi-layer stainless mesh sheet, multilayer circular mesh sheet etc..

Application: widely used in petrochemical, pharmaceutical, food and beverage, polyester and water treatment and other industries of the liquid and gas filtration, dry powder pharmaceutical industry and the pharmaceutical industry, filtering, drying to powder particles entrapped gas, film and plastic, oil, food and beverage and water treatment and other industries.

Aluminum Security Screen

We supply aluminum security screen for making of window or door shielding and safety.
This kind of aluminum mesh used for security screen is light weight and easy to clean.

Material: Aluminum alloy sheets
Color: Silvery white
Weight:110g/m2,115g/m2,120g/m2
Roll length:2ft-600ft
Roll Width:0.5m-1.52m
Mesh:14-24mesh

Features: Aluminum mesh securi ty screen has the features of fireproof, ventilation and ultraviolet.

Uses: Widely used to reinforce on doors and windows and to prevent insects and flies.

Anping Tenglu Metal Wire Mesh Co.LTD

Welded Mesh Gabions Architectural Wall Cladding

Gabions are mostly used as soil protection retaining wall or mass gravity retaining structures for landscape construction. Welded wire mesh gabions can also be used as architectural mesh in buildings. Main types of architectural gabions: Galvanized steel, pvc coated or Galfan coated welded gabions. The cages are filled with stone to form a flat container form, then placed one by one and connected firmly to each other with high tensile lacing wire. They are used to build an ancient-feeling cladding for the walls in castles or villa. Welded mesh gabions inner lined with geo-mat can be used for military bastion.

Reasons that gabions are chosen for architectural wall cladding:
a, The welded me sh panel str ucture gabions are hot dipped galvanized or green plasticized, hence achieve the surface of bright silver or Dark green color or other colors for options. They offers different styles of decorations to the building. You can choose according to your design needs.
b, The gabion bo xes with hot dipped galvanized steel or plastic coated steel mesh enjoy good corrosion resistance and work for a long time. Hence can form a permanent wall cladding that is maintenance free. It will not collapse even under big scope of deforming.
c, The cost of the welded mesh gabions are economic.
d, The stone gabions offers a long-time-story-telling feeling and suit all castles.
e, The gabions baskets are designed with collapsible structures for filling natural stones. The stones can be easily found anywhere, to save cost and to give a nature decorative effect.
f, The gabions wall cladding plays the role of retaining the soil as well as decoration.
g, The hexagonal twisted mesh gabions are not suitable for wall cladding as the mesh are flexible and not as solid and strong as welded mesh basket containers.

Specification of Welded Mesh Gabions for Cladding Walls:
Structures: Welded mesh panels square baskets or rectangular baskets. Fixed with spring steel lacing wire.
Wire Diameter: 3mm-5mm.
Mesh Opening: 2''x2'',3''x3'',4''x4'',and more.
Surface treatment: electro galvanized, hot dip galvanized, PVC spraying, PVC soaked, Galfan coated and so on. The welded wire mesh panels are coated before or after welded at options at different cost.

Welded Mesh Gabions are also Used:
Welded gabions have a wide range of uses besides architectural uses. They are used in slope support, foundation pit, mountain rock face mesh protection gabion, slope vegetation (green), railroad highway isolation guarding block. They are also made into cages, nets mats, scour protection of rivers, levees and seawalls, reservoirs and river closure with a cage. For control of river water flow, flood control, massive soil erosion control. By using of gabions, they can make the river banks receive permanent or semi-permanent protection.

woven Stucco Mesh Netting to Reinforce Roof and Wall

Stucco mesh refers to galvanized woven hexagonal wire mesh supplied in rolls. The metal wires are low carbon steel wire, stainless steel wire, iron wire or redrawing wire. Stucco netting can be installed on curved or inclined place due to its flexible. It can hold plaster, cement on roof, wall, ceiling, floor or tile to reinforce them. Stucco wire mesh also can be used as chicken wire, bird cage, fish fence, rockfall netting and so on.

Specifications:
Material: low carbon steel wire, stainless steel wire, iron wire, redrawing wire.
Surface treatment: galvanized.
Mesh opening shape: hexagon.
Weaving method: normal twist (double twisted or triple twisted), reverse twist (double twisted).
Two standard zinc coating for hot dipped galvanized:
Normal zinc coating: 50-60 g/m2.
Heavy zinc coating: 200-260 g/m2, maximum zinc coating is 300 g/m2.
Height: 0.3 m - 2 m.
Length: 5 m, 10 m, 20 m, 25 m, 30 m, 35 m, 50 m.
Height and length can be manufactured according to your custom.

Features of stucco netting
Insulation, refractory, durable.
Resistant to corrosion, rust and oxidation.
Stable structure, smooth surface, uniform mesh size, high tensile strength.
Unroll easily, cut easily.
Use simply, only need pave the mesh on the wall.
Electro galvanized wire mesh has lower cost and bright color.
Hot dipped galvanized wire mesh has better corrosion and oxidation resistance.
Galvanized before weaving wire meshes offer better performance of rust and corrosion resistance.

Applications of stucco netting
Hold plaster, cement on roof, wall, ceiling, floor or tile to reinforce them.
Feeding chicken, rabbit, duck, geese, fish and other poultry or small animals. Style can be fence and cage.
Protect vegetable, flower or small plant from poultry and small animals.
Equipment and machines protection, highway fence, tennis court fence, protection fence for road greenbelt.
Control and guide water, even flood.
Protect seawall, river bank, riverbed, pier.
Retaining walls.
Channel lining.
Prevent rocks and debris from falling onto roads and railways.

Galvanized stucco mesh in normal twist
Mesh sizeWire gauge (BWG)
inchmm
3/8"1032, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21
1/2"1327, 26, 25, 24, 23, 22, 21, 20
5/8"1632, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21
3/4"2025, 24, 23, 22, 21, 20, 19
1"2527, 26, 25, 24, 23, 22, 21, 20, 19, 18
1-1/4"3223, 22, 21, 20, 19, 18
1-1/2"4023, 22, 21, 20, 19, 18, 17
2"5023, 22, 21, 20, 19, 18, 17, 16, 15, 14
2-1/2"6521, 20, 19, 18
3"7521, 20, 19, 18, 17, 16, 15, 14
4"10019, 18, 17, 16, 15, 14

Galvanized stucco mesh in reverse twist
Mesh sizeWire gauge (BWG)
inchmm
1"2525, 24, 23, 22, 21, 20, 19, 18
1-1/4"3223, 22, 21, 20, 19, 18
1-1/2"4023, 22, 21, 20, 19, 18, 17
2"5023, 22, 21, 20, 19, 18, 17, 16
3"7520, 19, 18, 17, 16

Weld mesh fencing
Weld mesh fencing is a time proven, long lasting, reliable and inexpensive way to facilitate your fencing needs. Light weight, strong and flexible in its uses. Galvanized or powder coated to the colour of your choice.

Weld mesh fencing is custom designed to blend into its surroundings and environment. We recommend weld mesh for many applications including residential, school fencing, ovals and reserves-it is an ideal boundary or perimeter fencing due to its strength, making it almost vandal resistant.

Weld mesh fencing applications include:
Garden fencing
Pool fencing
Security fencing
Animal enclosures
Trellis
Machine guards
Pedestrian control
Timber posts with weld mesh panels

Welded fencing mesh

Welded fencing mesh adds a new dimension to industrial and domestic security due to its rigid and robust quality construction. The mesh is produced from 2.5mm to 3.15mm lightly and heavy galvanized wire.

Features:
Intersections are welded to form an integral non-collapsible barrier
Low maintenance costs
All wires are either lightly or fully pre-galvanized
Fencing mesh is ideal for the installation of security alarm systems

Applications:
Industrial perimeter security
Domestic perimeter s ecurity
Schools
Prisons
Freeway partitioning
Racking enclosure

Mesh apertures
(mm), wire diameter
(mm), roll heights
(mm), roll length
(m)
50 x 25, 2.5 & 3.15, 1200/1800/2400/2700, 30
50 x 50, 2.5 & 3.15, 1200/1800/2400/2700, 30
100 x 50, 2.5 & 3.15, 1200/1800/2400/2700, 30

358 Security Mesh Fence

Product Description:
358 mesh fence is featured by the design that combines the high security and perfect aesthetic effect. Panel sections are welded wire mesh with small rectangular openings 76.2 mmX12.7 mm made from 4 mm galfan steel wires, and welded well at each intersection, then PVC powder coating with green RAL 6005 or black RAL 9005 color, which provides a protective anti-corrosion property for 10 years. The high security 358 welded mesh fencing is extremely difficult to penetrate and difficult to attack by using conventional tools. Because of the anti-climbing and anti-cutting features, 358 welded mesh security fencing is also called anti climb fence. It is usually used for fencing where require high levels of security, such as airport, prison and military establishments, so 358 mesh is also called prison fencing. This kind of welded panel width is 2515 mm and height from 2007 mm to 3302 mm. Several panels can be installed on the top of each other, thus the 358 mesh fencing can achieve a total height of 6300 mm.

Materials:steel wire

Feature:
Difficult to climb and cut.
Provides aesthetic appeal and clear line of sight from any angle.
Minimum visual impact on the surrounding environment.
Available in powder coated finish.

Application:
Ideal for sensitive areas requiring the maximum degree of security, 358 closed space welded mesh is a product that can be used across all market spectrum such as;
Prisons,Substations,Ports,Schools,Water Reservoirs,Commercial Sites etc.

Reverse Twist Hexagonal Mesh

Product Description:
Hexagonal wire mesh is also known by the name of chicken mesh. Hexagonal Wire mesh (Chicken/Rabbit/Poultry Wire) is made of low carbon Iron Wire, the mesh is firm in structure and has flat surface. It is extensively used in industrial and agricultural constructions as reinforcement and fencing. It is also used as Fence for Poultry Cage, Fishing, Garden and Children playground, etc.

Materials:mild steel wire, stainless steel wire, PVC wire, etc.

Application:
Hexagonal wire mesh with its good corrosion resistance and oxidation resistance, serves well as strengthening, protection and temperature keeping materials in the form of mesh container, stone cage, isolation wall, boiler cover or poultry fence in constructio n, petroleum, chemical, breeding, garden and food processing industries.

Anping Tenglu Metal Wire Mesh Co.,LTD

Stainless Steel 304 Heavy Gauge Welded Mesh

Product Description:
Heavy gauge stainless 304 welded wire mesh can be used across many industries, for example, in health care, pharmaceutical, food and catering industries etc. Heavy wire stainless 304 mesh can be used in as hand railing and balustrade infills, racking and storing, rearing cages and pet enclosures etc.
Heavy wire of 2.5mm or less is available

Materials:ss304

Packaging :Wooden box

Our Service:
Materials certification
Customized size

Specifications:

1/2" x 1/2" x 10g (13 x 13 x 3.0mm)
1/2" x 1/2" x 12g (13 x 13 x 2.5mm)
1" x 1" x 10g (25 x 25 x 3.0mm)
1" x 1" x 12g (25 x 25 x 2.5mm)
1 1/2" x 1 1/2" x 10g (38 x 38 x 3.0mm)
2" x 2" x 10g (50 x 50 x 3.0mm)
2" x 2" x 12g (50 x 50 x 2.5mm)
3" x 1/2" x 10g (75 x 25 x 3.0mm)
3" x 1/2" x 12g (75 x 12 x 2.5mm)
3" x 1" x 10g (75 x 50 x 3.0mm)
3" x 3" x 10g (75 x 75 x 3.0mm)
1 1/2" x 1 1/2" x 12g (38 x 38 x 2.5mm)
3" x 3" x 12g (75 x 75 x 2.5mm)

Anping Tenglu Metal Wire Mesh Co.,LTD

Spiral Perforated Tubes

Product Description:
Perforated spiral welded tube is made with steel belt perforated, then coiled to the unfinished piping according to certain spiral line's angle (formation angle), then finished with sub arc welding of the pipe seams. The spiral angle degree of the welding seam of spiral welded tube is 50-75 degrees generally, therefore the spiral welded joint place resultant stress is 60-85% of that of the straight seam welded tube. Under the same working pressure, the wall thickness of spiral welded tube may be less compared to the straight seam welded pipe wall thickness.

Mild steel and stainless steel are common materials of manufacturing spiral perforated tubes. For generally applications, carbon steel is availa
ble. However, for corrosive work conditions, stainless steel perforated pipe is a cost-efficient choice in the long terms.

Lock seam perforated pipe is made by folding up the overlapping edges against each other, then folding them over in the same direction a number of times. It has flush surface outside and lock seam inside. This type perforated tubing is the popular option of fluid filtration like center tube in the filter house.

The spiral welded tube is mainly used in the petroleum industry as interior and outer protective covers for petroleum sand control pipes.

Spiral perforated tube -- different types:
Spiral Lock Seam Tubes
Spiral Louvered Tubes
Straight Seam Welded Tubes
Straight Lock Seam Tubes
Straight seam tack welded Tubes
Spot welded Straight Tubes

Features:
Excellent corrosion-resisting
Tubes are available with an internal spring for additional strength
With side opening exterior protection cover (optional)
Unique design of filter ring
Spiral welded perforated tube is approximately 15% stronger than longitudinally and welded tube
Easy for installation and less work time
Unlimited tube lengths
Lighter wall thickness can be used
Specifications:
Hole Style: Round,Square.slot.
Hole Pattern:straight line/stagger line
Aperture: 0.3mm--10mm
Center distance: 1mm--30mm
Degree :45°.60°.90°
Plate thickness: 0.1mm--5mm
Outer Diameter :20mm to 1000mm
cylinder height :30mm to 1200mm

Application:
Used in water treatment, pharmaceutical, chemical, food, beverage, oil filtration and etc, it could be filter mesh, filter element, filter cartridge, filter disc and etc.

Anping Tenglu Metal Wire Mesh Co.,LTD

Perforated Aluminum Security Screens Superior Strength and Security

Product Description:
An alternative to other security screening is our perforated aluminum security screens, which is non-corrosive aluminium finished with a premium-grade powder coating. It is strong, extremely resistant to corrosion, and very easy to clean. Precision-drilled holes create an open area of 40%-allowing clarity of vision and pleasant airflow. At the same time, durable and sturdy perforated security screen offers superior strength and security, protecting you from potential insect intruders, greatly increasing the feeling of security and being protected.

Perforated aluminium mesh security screen for doors is more modern than diamond grille design and less expensive than woven stainless steel security mesh screen. They are all offering great security for your house and family.

Materials:Aluminum

Feature:
Not collect duty.
Relieve glare.
High strength: anti-dynamic impact, anti-knife shear.
From inside the security screen allows 60% of available light to enter and allows visibility and airflow through the holes.

Application:
Security sliding/hinged doors and windows.
Casement, awning and double-hung window screens.
Shop front security screens & doors.
Fire and Emergency Exit screens.
Balustrades.
Pool fencing.

Anping Tenglu Metal Wire Mesh Co.,LTD

Slot Holes Perforated sheet

Product Description:
The longitudinal shape of the hole looks interesting and at the same time is very docile e.g. for the production of radiator covers, various types of screens or airshafts. This types of holes are used in seasonal jobs by agriculturists for the purpose of grading.
This types of holes play an important role in agricultural seasonal jobs for the purpose of grading.
Moreover, oval shape of holes looks visually unusually, even though it is a rather simple type of perforation. Slot holes are therefore also used for decorative purposes.
Types of slot holes:
slot (lengthwise) holes in straight rows - stock code: Lg
slot (lengthwise) holes stag gered - stock code: Lv
slot (lengthwise) holes atypical-as required (or made according ti drawing documentation) by the customer
Materials:Steel, stainless steel, cut into galvanized sheets, aluminium

Application:
interior/exterior, industrial purposes
industrial screens for sorting
staircase/balcony railing fillers, covers, partitions
sound/thermal insulation, ventilation shafts, metal furniture