* Low cost
* Voltage output signal
* Built-in temperature sensor available
* May be used with H5800 handheld meter or separately
* Compact and convenient in use
* Fast connection
Using thin-film sensor, whose capacitance varies proportionally to medium relative humidity, RHA measures relative humidity of air and non-aggressive gases at normal ambient pressure and converts it into standard voltage signal. Based on the RHT transducer, but with its electronics fitted into a cylindrical body, this probe is especially suitable for fast measurements in combination with handheld humidity measuring devices that feature programmable or scalable input. Furthermore, a platinum temperature sensor may be built in the probe for simultaneous medium temperature measurement.
Through its flexible cable with miniature connector, the RHA probe can be easily connected to a H5800 meter to form a lightweight multifunctional and widely applicable device for handheld relative humidity measurement.
* Low cost
* Voltage output signal
* Built-in temperature sensor available
* May be used with H5800 handheld meter or separately
* Compact and convenient in use
* Fast connection
Using thin-film sensor, whose capacitance varies proportionally to medium relative humidity, RHA measures relative humidity of air and non-aggressive gases at normal ambient pressure and converts it into standard voltage signal. Based on the RHT transducer, but with its electronics fitted into a cylindrical body, this probe is especially suitable for fast measurements in combination with handheld humidity measuring devices that feature programmable or scalable input. Furthermore, a platinum temperature sensor may be built in the probe for simultaneous medium temperature measurement.
Through its flexible cable with miniature connector, the RHA probe can be easily connected to a H5800 meter to form a lightweight multifunctional and widely applicable device for handheld relative humidity measurement.
Ginger root
Botanical name: Zingiber officinale Linn.
Family: Zingiberaceae.
Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant.
Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice.
Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position.
Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed.
Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils.
The composition of dry ginger is given below:
Dry Ginger rootMoisture:6.9 %
Protein:8.6 %
Fat:6.4 %
Fiber:5.9 %
Carbohydrates:66.5 %
Ash:5.7 %
Calcium:0.1 %
Phosphorous:.15 %
Iron:0.011 %
Sodium:0.03 %
Potassium:1.4 %
Vitamin A:175 I.U./100 g
Vitamin B1:0.05 mg/100 g
Vitamin B2:0.13 mg/100 g
Niacin:1.9 mg/100 g
Vitamin C:12.0 mg/100 g
Calorific value:380 calories/100 g.
Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Explore the exotic Copaiba Essential Oil sourced from natural resinous substances of Copaifera Officinalis trees renowned for its diverse aromatic properties Aromas Oils a leading copaiba essential oil exporter ensures the delivery of this unique oil globally
Botany
Copaiba Essential Oil is derived from Copaiba Balsam trees widely cultivated in North amp South America Tropical Asia and Africa These trees with thick short trunks grow up to 30 meters in highly humid and temperate climates The resin known as copaiba balsam is collected from tree trunks cavities offering a highly valued medicinal aromatic stimulant herb
Copaiba Essential Oil An Overview
Obtained through steam distillation of copaiba oleoresins this oil is a thin pale yellow to yellow liquid with a mild woody sweet aroma and spicy peppery undertones Laden with anodyne antibacterial antimicrobial antiinflammatory astringent expectorant and digestive properties Copaiba Essential Oil is a versatile oil with numerous benefits
Copaiba Essential Oil Benefits
Promotes wound healing prevents fungal infections reduces swelling and relieves pain
Aids in treating digestive respiratory urinary and reproductive systemrelated issues
Diminishes blemishes dark spots and brightens skin tone
Useful in conditions of stomach ulcers tetanus herpes and hemorrhages
Alleviates insect bites sores psoriasis chilblains and eczema when applied topically
Promotes relaxation of the nervous system and reduces stress
Copaiba Essential Oil Uses
Users worldwide both bulk and retail obtain this oil from copaiba essential oil suppliers for various applications
Used as a fixative and aphrodisiac ingredient in perfumes due to its exotic aroma
Applied to wounds scars or cuts for quick healing
Diffused to fill surroundings with its unique fragrance
Added to massage blends for relieving inflammation and pain
Mixed in herbal tea or medicinal preparations
Copaiba Essential Oil Blends Well With
Rosewood Cedarwood Chamomile Ylang Ylang Lavender Frangipani Mimosa Cardamom Geranium Eucalyptus Ravensara and Melissa Leaf essential oils Copaiba oil wholesale suppliers offer these oils in bulk for blending
Cautionary Measures
Conduct a skin test before extensive use
Avoid using expired or oxidized oils
Dilution with other oils is recommended
Ingestion should be done under the guidance of a healthcare expert
Storage Instructions
Transfer the oil from metal containers received from Copaiba Essential Oil manufacturers to dark glass containers to maintain quality and extend shelflife
Locations Covered
As a Copaiba essential oil bulk supplier the enterprise delivers products globally covering the UK US Canada Australia New Zealand South Korea China Taiwan Thailand Vietnam South Africa France Spain Poland Romania Serbia and other countries
Documents Available on Request
Copaiba oil wholesale manufacturers provide the following documents upon request
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30�ºC~160�ºC
Turbidity 10000ppm and small bubble content
Flow rate 0~�±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
1433 Rha Humidity Probe For Handheld Meters Suppliers
Short on time? Let Rha Humidity Probe For Handheld Meters sellers contact you.
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30C~160C
Turbidity 10000ppm and small bubble content
Flow rate 0~±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power.
Product features
The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user.
With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW.
the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter.
Special universal interface for FC/SC/ST, easy to transformation.
GF112V2 made in GFUVE GROUP, is a high precision single phase handheld energy meter accuracy tester in class 0.1, used for testing all kinds of single phase electronic meters error on site. Wide measurement range from 1mA to 200A and 0 to 600V, frequency range 40.000Hz to 70.000Hz, and also can be used to test alternating current electrical parameters - voltage, current, active power, reactive power, apparent power, harmonics, phase angle, power factor, frequency, energy etc. It can display U & I wave form and vector diagram. Small size, light weight, simple and convenient operation. It is an ideal testing equipment for the metrology departments of electricity power companies and electrical service engineers.
GF112 handheld single phase watt-hour meter tester is with human oriented design, hand-held and lightweight. It is suit for electric power departments, measuring and quality examining departments and electric lab to field use. It is capable of testing various types single phase watt-hour meters on site and can also be used for testing alternating current parameters , for example U, I, P, Q, S, F, E etc.
The instrument GF312D1 is a precision 0.05% AC energy meter testing instrument, mainly used to test three phase energy meter error on site, measure all various of AC parameters and CT ratio & phase error, it is also as three phase reference energy meter in the laboratory. Mainly using test single phase or three phase meter error on site. GF312D1 energy meter calibrator is an ideal test tool for the metrological service of electricity power company.
Digital large size lcd display
Test range: 5%~40%
Accuracy: 1%
Date hold and can hold value
Battery: one 9v battery
Low power indicating and can select in
2pins sensor
Can change the testing sensor pins
Conveniently dispense with the plastic.
Dimension: 130lx64wx32h(mm)
FEATURES
Measure phase angle between two voltages, between two current or between voltage and current
Measure alternating voltage (U), alternating current (I), frequency (F), active power (P), reactive power (Q), power factor (PF) and so on.
Current signal is obtained by the clamp current transformer on line directly
Discern inductive circuit and capacitive circuit;
Directly read differential protection phase among every unit of CT
Can check connection of transformer
Measure two way voltage phase sequence
Can check whether the meter connection is right or not
Can evaluate the running speed of electric kWh meter
High resolution of current, so can be used as a leakage current meter
INTRODUCTION
The instrument is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure various of AC parameters.
TECHNICAL SPECIFICATIONS
Electrical parameters
Accuracy class 0.05%, 0.1%
Resolution 6 TFT (640-480)
Power supply 220V±10%, 50/60Hz
Li-polymer battery (size (mm): 110x51x16, nominal output voltage: 7.2V, capacity: 5000mAh)
Power line supply (U1, UN), 85V-265V 50/60Hz
Communication port RS232
Test voltage
Range 5-480V
Error ±0.05% (30V-480V)
±0.1% (5V-30V)
Harmonic 2nd-63st
Test current
Range (direct connection) 5mA-20A
Error (direct connection) ±0.05% (100mA-20A)
±0.1% (10mA-100mA)
Range (clamp CT) 10mA-3000A
Error (camp CT) ±0.2% (100mA-100A)
±0.5% (100A-3000A)
Harmonic 2nd-63st
Power measure error
Active power (direct connection) ±0.05% (0.1A-20A)
±0.1% (0.01A-0.1A)
Reactive power (direct connection) ±0.1% (0.1A-20A)
Energy measure error
Active energy (direct connection) ±0.05% (0.1A-20A)
±0.1% (0.01A-0.1A)
Reactive energy (direct connection) ±0.1% (0.1A-20A)
Phase angle
Range 0-360
Resolution 0.01
Error ±0.05
Frequency
Range 45-65Hz
Resolution 0.001Hz
Error 0.002Hz
Pulse input
Input channel 2
Input level 5-24V
Input frequency Max. 2MHz
Pulse output
Energy constant 180000imp/kWh, 1800imp/kWh, 180imp/kWh
Pulse ratio 1:1
Output level 5V
Function
Vector diagram Yes
Waveform Yes
Energy accumulation Yes
Communication with PC Yes
Mechanical parameters
Instrument dimensions (WHD) (mm) 220-13861
Instrument Weight (kg) 1.7
Carry case dimensions (WHD) (mm) 450-320185
Carry case (kg) 8.5
Environmental conditions
Ambient temperature -10C to 55C
Relative humidity 15%-85%
INTRODUCTION:
The instrument is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure all various of AC parameters.
FEATURES
Three phase active or reactive electricity energy meter.
Calibrate three phase, single phase, and active or reactive meter error.
Measure U(voltage) of three phase or single phase.
Measure I(current) of three phase or single phase.
Measure active power of three phase or single phase.
Measure reactive power of three phase or single phase.
Measure apparent power of three phase or single phase.
Measure power factor of three phase or single phase.
Measure phase angle between voltage and current.
Measure frequency of power line.
Display vector diagram.
Display waveform of U and I.
Analyze and display content of harmonic of U and I.
Measure 2-64 harmonic of U, I.
Store and display measured data.
Optional 5A, 20A, 100A, 500A, 1000A, 2000A, 3000A current clamp.
Measure CT variable ratio.
Measure the ratio or lag-angle of low-voltage transformer.
Adopt 32 bit ARM processor, multi-channel 16 bit precision A/D convertor, high resolution TFT color LCD.
Inner equipped with 0.01% wide-range current transformer and can be equipped with various type current clamps, wide range of measurement and high veracity.
Low consumption circuit design, high energy Lithium battery supply, intellectual power management software, which enables the instrument continuously working up to 10 hours.
- Big data analysis and management through AI cloud server
- The device for acquring health information and having multi-function portable thermometer that can provide visual information
- Obtained certificate of New Excellent Technology(NET)
SPECIFICATION:
- USB Type : UVC V 1.1
- Support USB Connector Basic : USB Micro-B (USB Converter : USB-C, USB-A)
- USB Support OS : Android 4.0 and later, Windows(7,8,10)
- Camera Button Functions : Remote : Start, Mode Change, Still Image Capture, Measurement, Result
- Out Dimension : [30(W)X212(L) (With Bebe-TMC)]
- Weight : About 87 g (With Bebe-TMC)]
- Operating Humidity - 5 - 85 percentage
- Wi-Fi Type (with ARH-WM) : Wi-Fi : Wireless LAN IEEE 802.11 b/g/n
- Battery : Polymer Li-ion [3.7 V, 700 mAh]
- Wi-Fi Support OS: Android 4.0 and later, iOS 7.0 and later, Windows(7,8,10),MAC OS
Based on the rugged humirel humidity sensor, GP3516 is a dedicated humidity plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the module�??s humidity linear voltage output. The threaded end ensures proper mounting of the sensor inside te camber. GP3515 is specially suitable for humidity chambers applications.
Main features
Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO2 , H2S, O3,
NOx , NO, CO, Softener, acids (H2SO4, HNO3, HCl), HMDS, Insecticide, Cigarette smoke .
Threaded end for convenient and proper mounting.
Reliability not affected by repeated condensations
Full interchangeability. Better than +/-3%RH and +/-0.15°C
Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply
Humidity calibrated within +/- 3% RH @ 55% RH
Ratiometric to voltage supply within the specified range
Resistance to chemical and physical stresses
GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge.
GP3515 is protected against reverse polarity
GP3515 is not light sensitive
Additional tests under harsh chemical conditions demonstrate good operation in presence of salt
atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids.
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications.
Parameter Symbol Value Unit
Storage Temperature T stg -40 to125 C
Supply Voltage V cc 5.25 V DC V dc
Humidity Operating range Rh 0 to 100 %Rh
Max. output current I peak 5 mA
Temperature operating range T a -40 to 110 C
Max. Power P d 25 mW
DM400 Chemical Moisture Meter
High Frequency moisture meter DM400 is our new designed product with separate probe .It used for measuring moisture content of soil ,silver sand, chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry.
Features:
* It is portable, compact, easy to use and the moisture measurement readings are instant.
* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
* This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country.
* Low battery alert.
Specifications:
Display:4 digital LCD
Measuring range :
0.00%-2%
0.0%-90%
Measuring conditionï¼?
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply: 9V battery
Dimensions: 172Ã?66Ã?28ï¼?mmï¼?
Needleï¼?450mm
Weight:250g
Dew Point Meter HD600
Widely used in workshops, offices, factories, libraries, computer stations, laboratories and warehouses. Applicable to pharmaceutical, packaging, textile, cigarette, electronic manufacturing and other industries.
Features
Adopt digital signal sensing technology, good measurement repeatability, fast response and high sensitivity .
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
Able to measure Humidity, Temperature, Wet Bulb Temperature,
Optional USB or Blue Teeth
Data hold function.
Low battery alert.
SPECIFICATION
Display:10mm Dispaly
Parameters Measured:
Humidity and Temp, Wet Bulb Temp, Dew Point Temperature
Dew Point Temp. range:
-40 C~40 C (-40 F~104 F)
Dew Point Temp. resolution: 0.1 C
Dew Point Temp. accuracy: ±1 C
R.H range: 5-98%
R.H resolution: 0.1RH%
R.H accuracy: 2.5RH%
Temp range: -20 ~60 (-4~140 )
Temp resolution: 0.1 /0.1
Temp accuracy: 0.5
Wet Bulb Temp range:-20 ~60 (-4~140 )
Wet Bulb Temp resolution: 0.1 /0.1
Wet Bulb Temp accuracy: 0.5
Sampling Time: less than 0.5s
Power supply:
4x1.5 AAA size (UM-4) battery
Dimensions:
185mm 70mm 30mm
Weight:
125g (not including batteries)
1433 Rha Humidity Probe For Handheld Meters Suppliers
Short on time? Let Rha Humidity Probe For Handheld Meters sellers contact you.
