SC APC SC UPC Dual Round Duplex 2.0mm Single Mode Fiber Optic Pigtail PVC Pigtails are used for splice applications when terminating outside plant cable. Its consists of a connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS requirements. All of OMC pigtails are factory inspected and tested, with available interferometer data upon request. OMCs pigtails are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.
Fiber Distribution Box: FDB-16C-1 Feature: Water-proof design with IP-66 Protection level Integrated with splice cassette and cable management rods. Manage fibers in a reasonable fiber radius condition. Easy to maintain and extend the capacity Fiber bend radius control more than 40mm. Suitable for the fusion splice or mechanical splice. 1x2/1x4/1x8/1x16 Splitter Can be installed as an option. Efficient cable management. Entrance cable OD:6-12mm Distribution cable of 16 ports for 2-4mm drop cable. Wall Mount and Pole mount Install Specifications: Material : PC+ABS Size : 303x236x109mm Max Capacity : Splice 16/32 Fibers(1*8/1*16 mini type splitter) Numbers of Adapter : 16 pcs SC/UPC or SC/APC Weight : 1.5kgs Color : Black
Field installation connector also be called Fast install connector is a new kind of connector that could be used in FTTH project scene. They donot need to polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Of course, It donot need fused the fiber. Just some little tools enough, so it could save time and cost. Connector Type : SC Polishing : UPC and APC Ferrule : Ceramic V-Groove : Plastic Material Cable Diameters : 2x3mm FTTH Drop Cable;1.6x2.0mm FTTH Drop Cable Length : 51mm Insertion Loss : 0.3dB(typical);0.5dB(Max) Return Loss : UPC 40dB;APC 50dB Tension Strength : 30N Operating Temp : -40 C~+75 C
Fast installation connector also be called Field install connector is a new kind of connector that could be used in FTTH project scene. They don't need to polishing, no epoxy. They could be installed in the field and make connections less than two minutes. Of course, It donot need fused the fiber. Just some little tools are enough, so it could save time and cost. Part No. : J-P-SSA-50 Connector : SC APC Ferrule : Ceramic V-groove : Plastic material Cable Diameters : 2.0/3.0mm Simplex cable;2x3 FTTH Drop Cable Dimension : 50mm Insertion Loss : 0.3dB(typical); 0.5dB(Max) Return Loss : UPC 40dB;APC 50dB Tension Strength : 50N Operating Temperature : -40 C~+75 C
SMA-SMA Simplex Optic Fiber Patch Cable Multi-mode OM1 OM2 High Quality PVC Patch Cord Jumper Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies. OMCs Patch cables are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance. Connectors Standard: SMA: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973. Features 1.100% pre-terminated and tested in factory to ensure transfer performance. 2.Rapid configuration and networking, reduce installation time. 3.Supports 40G and 100G network applications. 4.Low insertion loss and added loss. 5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available. 6.High back loss, small volume, light weight. 7.End-face geometry and quality superior than IEC and Telcordia standards. 8.LSZH, OFNP, OFNR cable jacket. 9.Mechanical performance: IEC 61754-20 standard. 10.RoHS and REACH materials compliant.
Fiber Distribution Box: FDB-16C-3 Features: Water-proof design with IP-66 Protection level Integrated with splice cassette and cable management rods. Manage fibers in a reasonable fiber radius condition. Easy to maintain and extend the capacity Fiber bend radius control more than 40mm. Suitable for the fusion splice or mechanical splice. 1x2/1x4/1x8/1x16 Splitter Can be installed as an option. Efficient cable management. Entrance cable OD:6-12mm Distribution cable of 16 ports for 2-4mm drop cable. Wall Mount and Pole mount Install Specifications: Material : PC+ABS Size : 303x236x109mm Max Capacity : Splice 12/24 Fibers(1*8 /1*16 Cassette PLC Splitter) Numbers of Adapter : 16 pcs SC/UPC or SC/APC Weight : 1.5kgs Color : Black
Product Overview This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power. Product features The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user. With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW. the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter. Special universal interface for FC/SC/ST, easy to transformation. Optional auto off. Optional backlight display. Optional steady/flashing red light.
Supplier: Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware,brass & metal nozzles,brass nipples,brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts,brass turned components,brass inserts,brass auto parts,brass threaded stud,brass forging components,brass forging metal turning parts,brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts,bolts,washers,zinc(zamak,mazak) metal parts,brass & ms,ss,zinc,aluminium metal precision
Services: Manufacturer & exporter