Find Verified Precision Ceramic Shell Investment Casting Part Suppliers, Manufacturers and Wholesalers

Casting part of a pump body for marine and oil industry;
Casting type: silica sol lost wax process;
Material: ca15 / 410 stainless steel;
Weight: 15kg;
Ped/ad2000 certificated;
Chemical composition tested by german spectrometer;
Ndt test (x rays, dye test etc) available.
Weight: 15kg.
Heat number tracing

Maximum cast size
500*500*350mm
Casting weights
20g~80kg
Standards
Astm, jis, din, bs, mil
Wall thickness
1.5-2mm min
Casting process type
Silica sol lost wax casting
Machining
Cnc machining, cnc lathe
Tolerances
Raw casting material according to vdg p690. Can achieve tighter tolerance by cnc machining.
Ndt service
Dye inspection, x ray inspection, ultrasonic inspection etc
Surface finish service
Pickled, passivated, zinc plating, black phosphating , vibration polishing, electro polishing, satin polishing, hand polishing

We are producing only Aluminum Gravity Die Casting for 30 year in Korea
We have a lot of experience about Gravity die Casting
Please make anytime with drawing

Aluminum Parts

We Are Leading Leading Manufacturer Of Brass Precision Tuned Parts

We are Manufacturer of Ferrous & Non Ferrous Investment Casting in Metal Grade: WCB, CF8, CF3M, CF8M, CF8M-L, CA-15, 416, 420, CF3, CF3M, EN Grade, Duplex Steels & stainless steels casting SS304, SS316, SS316-L, SS410, SS420, grade etc. for precision parts

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Since 36 Years, we JAY KHODIYAR INDUSTRIES are recognized as a trustworthy manufacturer, Exporter and supplier of cast iron product. In order to manufacture high-quality cast iron our professionals employ advanced machines and utilize quality tested material procured from the authentic vendors. In addition, our clients can avail these cast iron from us at a reasonable price.

- Coconut shell is the strongest part covered in coconut fruit. Coconut shell is located in between the coconut flesh and coconut husk. This shell is naturally created to protect the inner part of coconut. This is shell is used to produce various handicraft applies and other applications.
- Specifications:
Material: Natural Coconut Shell
Color: Brown
Shape: Natural, half-cut coconut shell
Brand Name: 99 Gold Data
Usage: Growing plant, charcoal
Place Of Origin: Viet Nam
MOQ: 10 tons

We are leading manufacturer & exporter of Brass Knob.

Material: Carbon Steel, Alloy Steel, Stainless Steel
Process: Sodium Silicate Process, Silica Sol Process, and Compound process, Cnc machining.
Casting Weight Range: 0.5-80KGS
Certificate: DIN, AISI, ASTM, BS, JIS, ect.
Surface Treatment: Zinc plating, Polishing, Sand Blasting, Acid pickling, black oxidized, Painting, Hot dip galvanized, Powder coating, Nickel plating etc
Application: Train & railway, automobile& truck, construction machinery, agricultural machinery, ship and vessels, petroleum machinery, construction, valve and pumps, hardware, power equipment and so on.

Sweet marjoram: Origanum (O) hortensis (orMajoranahortensis).
Potmarjoram: O.onites
Wildmajoram: O.vulgare.
Syrian majoram is called zatar
Family: Labiatae or Lamiaceae (mint family).
In Europe, marjoram was a traditional symbol of youth and romantic love. Used by Romans as an aphrodisiac, it was used to cast love spells and was worn at weddings as a sign of happiness during the middle Ages. Greeks who wore marjoram wreaths at weddings called it “joy of the mountains.” It was used to brew beer before hops was discovered, and flavored a wine called hippocras. A cousin of the oregano family, marjoram originated in Mediterranean regions and is now a commonly used spice in many parts of Europe. Called zatar in the Middle east and often mistaken for oregano, it is also a popular spicing in Eastern Europe.
Origin and Varieties
Marjoram is indigenous to northern Africa and southwest Asia. It is cultivated around the Mediterranean, in England, Central and Eastern Europe, South America, the United States, and India.
Description
Marjoram leaf is used fresh, as whole or chopped, and dried whole or broken, and ground. The flowering tops and seeds, which are not as strong as the leaves, are also used as flavorings. Sweet marjoram is a small and oval-shaped leaf. It is light green with a greyish tint. Marjoram is fresh, spicy, bitter, and slightly pungent with camphor like notes. It has the fragrant herbaceous and delicate, sweet aroma of thyme and sweet basil. Pot marjoram is bitter and less sweet.
Chemical Components
Sweet marjoram has 0.3% to 1% essential oil, mostly monoterpenes. It is yellowish to dark greenish brown in color. It mainly consists of cis-sabinene hydrate (8% to 40%), -terpinene (10%), a-terpinene (7.6%), linalyl acetate (2.2%), terpinen 4-ol (18% to 48%), myrcene (1.0%), linalool (9% to 39%), -cymene (3.2%), caryophyllene (2.6%), and a-terpineol (7.6%). Its flavor varies widely depending on its origins. The Indian and Turkish sweet marjorams have more d-linalool, caryophyllene, carvacrol, and eugenol. Its oleoresin is dark green, and 2.5 lb. are equivalent to 100 lb. of freshly ground marjoram. Marjoram contains calcium, iron, magnesium, phosphorus, potassium, sodium, vitamin A, vitamin C, and niacin.
Culinary uses of Marjoram
Marjoram is typically used in European cooking and is added to fish sauces, clam chowder, butter-based sauces, salads, tomato-based sauces, vinegar, mushroom sauces, and eggplant. In Germany, marjoram is called the “sausage herb” and is used with thyme and other spices in different types of sausages. It is usually added at the end of cooking to retain its delicate flavor or as a garnish. It goes well with vegetables including cabbages, potatoes, and beans. The seeds are used to flavor confectionary and meat products.

Nutmeg
Myristica fragrans
Fam: Myristicaceae
The nutmeg tree is a large evergreen native to the Moluccas (the Spice Islands) and is now cultivated in the West Indies. It produces two spices — mace and nutmeg. Nutmeg is the seed kernel inside the fruit and mace is the lacy covering (aril) on the kernel.
The Arabs were the exclusive importers of the spice to Europe up until 1512, when Vasco de Gama reached the Moloccas and claimed the islands for Portugal. To preserve their new monopoly, the Portuguese (and from 1602, the Dutch) restricted the trees to the islands of Banda and Amboina. The Dutch were especially cautious, since the part of the fruit used as a spice is also the seed, so that anyone with the spice could propagate it. To protect against this, the Dutch bathed the seeds in lime, which would prevent them from growing. This plan was thwarted however, by fruit pigeons who carried the fruit to other islands, before it was harvested, scattering the seeds. The Dutch sent out search and destroy crews to control the spread and when there was an abundant harvest, they even burned nutmeg to keep its supply under control. Despite these precautions, the French, led by Pierre Poivre (Peter Piper) smuggled nutmeg seeds and clove seedlings to start a plantation on the island of Mauritius, off the east coast of Africa, near Madagascar. In 1796 the British took over the Moloccas and spread the cultivation to other East Indian islands and then to the Caribbean. Nutmeg was so successful in Grenada it now calls itself the Nutmeg Island, designing its flag in the green, yellow and red colours of nutmeg and including a graphic image of nutmeg in one corner.
Spice Description
The nutmeg seed is encased in a mottled yellow, edible fruit, the approximate size and shape of a small peach. The fruit splits in half to reveal a net-like, bright red covering over the seed. This is the aril which is collected, dried and sold as mace. Under the aril is a dark shiny nut-like pit, and inside that is the oval shaped seed which is the nutmeg. Nutmegs are usually sold without the mace or hard shell. They are oval, about 25 mm (1 in) in length, lightly wrinkled and dark brown on the outside, lighter brown on the inside. Nutmeg is sold whole or ground, and is labeled as ‘East Indian’ or ‘West Indian’ indicating its source. Whole nutmeg may be coated with lime to protect against insects and fungus, though this practice is giving way to other forms of fumigation.
Bouquet:sweet, aromatic and nutty
Flavour : Nutty , warm and slightly sweet
Hotness Scale: 1

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.

According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.

According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

Material: C45
Part name: cross support (1.4kg)
Application: cross support
Process: precision casting
Sample lead-time: 4-8 weeks
Casting tolerance: CT4-CT9
Tooling lifetime: 100,000 times
Finish: acid cleaning and passivation
Competitive advantages:
Big customer's long-term corporation experience (Engross, Pacbrake, BMP, CLE)
Strictly quality control and timely delivery guaranteed
OEM service
Trial order or small orders acceptable

Ball Clay:

A member of kaolinite family, Ball Clay is renowned for its plasticity and green strength. They consists varying proportions of kaolinite, mica and quartz, with small amounts of organic matter and other minerals, and are commercially values because they increase the workability and strength of various ceramic bodies and have white or near white firing characteristics. Ball clay is processed to minimize the levels of coarse particles. This enhances better workability and higher strength.

Applications :
It forms a major part of many ceramic applications, including sanitary ware, tiles, table wares and to an increasing extent non-ceramic applications like functional fillers and advanced application for example technical ceramics.

Kaolin:

Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.

Applications:

Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.

Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.

Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.

Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.

Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.

Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.

Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.

Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container