An easy-to-use, water-based primer specifically formulated to �¢??lock-out�¢?? corrosion on a wide range of metals. Applied correctly, is guaranteed for years.
USES
Suitable on sheet metal, castings, wrought iron, TNT Bar, steel Bar and steelwork. This product is not recommended for automotive use.
COLOURS
Available in natural green.
SIZES
Available in 4 litre,10 litre and 20 litre
COVERAGE
Up to 14 square metres per litre depending upon surface porosity and application method.
APPLICATION
Roller, brush, dip or airless spray. Provide adequate ventilation during use.
DRYING TIMES
Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30�?�°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10'c OR ABOVE 45C.
DANGEROUS GOODS CLASSIFICATION
Not classified as Dangerous Goods.
SURFACE PREPERATION
Previously Painted Surfaces :
Scrape off loose and flaking paint and make sure the remainder is firmly attached. Sand glossy surfaces and enamels thoroughly and wipe clean. Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer.
TNT BAR,STEEL BAR AND IRON:
Remove all grease, dirt and other surface contaminants.Remove all rust by abrasive blasting or mechanical sanding. Treat any remaining rust with. Prime treated and bare areas with one coat SAFFRO Anti-Corrosive Metal Primer. In highly corrosive environments or within 2 kilometre of the sea, apply 2 coats of SAFFRO Anti- Corrosive Metal Primer
Special Features : Provides basic protection to ferrous metal.For spraying and brushing
Uses : For metal items and light constructions, in an urban, moderately corrosive environment, such as bars, sheds, etc
Painted object : Iron Parts and Light Construction
Burglar Bars
Barns
Applied Surface : Ferrous metals
Paint Type : Primer
Properties : For brush and spray application
One Component
Description
White Metal Primer can be used as an undercoat for ferrous metal substrates. It offers good opacity, coverage, flow & leveling & Protection against corrosion.
185928 Metal Primer Suppliers
Short on time? Let Metal Primer sellers contact you.
Description
Red Oxide Metal Primer can be used as an undercoat for ferrous metal substrates. It offers good opacity, coverage, flow & leveling & Protection against corrosion.
Unique Features & Benefits
Ease of Application
Excellent durability
Good Corrosion Resistance
Super silky and Glossy finish.
Excellent flow characteristics to form smooth and uniform finish
Excellent color and color retention
Excellent coverage
Name of the Product :Heat Reflective Paint for Metals
Brand Name : Feel Cool MT
Product Description : Reflects solar from the surface and prevents heat from passing into the building
Unique Selling Proposition : High durability (5 Years), Corrosion resistance, Certification from CRRC USA, Waterproof Surface
Properties : High Heat Reflection, elastomeric waterproof crack bridging, antifungal
Application areas (surfaces) : Metal
Applications : Warehouse, storage tanks
Advantages : Energy saving, high-temperature difference, waterproof, antifungal
Coverage (sq.ft per lit) : 33 to 35 Sq.ft /lit
Surface Cleaning : Standard surface cleaning to remove dust followed by application
Pack size : 1lt, 4 lt, 20 lt
Certificate : Cool Roof Rating Council USA, NABL certified lab for Leed recommended testing
It is mainly used for anticorrosion and decoration for steels like various C-type steel, H type steel, Z type steel, outdoor handrail, etc; featuring large area application, good color, primer-topcoat combination, reducing construction operations, high performance price ratio, thinning after adding water, environmental friendly, no harm.
Synthetic Red Oxide Primer
Ritver Synthetic Red Oxide Primer Commercial is based on Alkyd resin containing anticorrosive pigments. It is used as a primer coat for many applications especially for protecting the metals and other steel structures against corrosion and is quite versatile. It forms a firm base with good adhesion for Ritver Topcoat Enamels and Ritver Quick Drying Enamels.
ARP326
PLASTIC PRIMER
A transparent single component primer that promotes adhesion of subsequent coats of paint on most plastic substrates particularly those used in automotive.
Product Details:
Product Type : Metal Products
Supply Ability : 2500000 Kilograms Per Month
Price And Quantity
Minimum Order Quantity : 50 Kilograms
Product Specifications
Product Type : Metal Products
Trade Information
Payment Terms : Cash in Advance (CID)
Supply Ability : 2500000 Kilograms Per Month
Delivery Time : 1 Week
Main Domestic Market : All India
Product Description
The Metal Nuggets in mining is a solid lump of metal. This is majorly nuggets of gold but can be of copper, platinum, silver and other various metals. It is golden in color with small lumps or can say fragments used for crafting various components such as decor pieces, gifting items, jewelry and more. It is basically water worn pieces of metals that are weathered out of an original lode.
Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.
Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.
Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999
Cu 999
Element0005
Copper9999 Min
Lead0005 Max
Bismuth05 Max
Total impurities03 Max
Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94
Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch
Shall consist of clean untinned uncoated unalloyed
copper wire and cable not smaller than No 16 B S
wire gauge free of burnt wire which is brittle
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
JoCamDeal Inc supplies premium metal scrap for global industrial applications. Our range includes heavy melting steel (HMS 1 & 2), shredded scrap, cast iron, and steel turnings. Sourced from trusted yards and processed with strict quality checks, our scrap meets international recycling and melting standards. Perfect for steel manufacturing, re-rolling mills, and foundries, our products help reduce raw material costs and support eco-friendly production. We ensure clean, contamination-free shipments and offer flexible supply volumes based on client needs. With efficient logistics and global reach, JoCamDeal Inc delivers reliable, on-time service you can count on.
At Johneliz Global Investment Limited, we supply a broad range of high-quality Scrap Metals to support recycling, manufacturing, and industrial processes. Our offerings include both ferrous and non-ferrous scrap, such as copper, aluminum, stainless steel, and iron, sourced responsibly and sorted for purity and usability. Scrap metals are essential for eco-friendly production, helping reduce environmental impact and conserve natural resources. We ensure all materials are processed under strict quality standards, providing clean, reusable metal for melting, remanufacturing, or resale. With a commitment to sustainability, efficiency, and reliable sourcing, Johneliz Global Investment Limited delivers consistent supply solutions tailored to meet the demands of global clients in construction, automotive, metalworking, and other heavy industries.
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999
Cu 999
Element0005
Copper9999 Min
Lead0005 Max
Bismuth05 Max
Total impurities03 Max
Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94
Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch
Shall consist of clean untinned uncoated unalloyed
copper wire and cable not smaller than No 16 B S
wire gauge free of burnt wire which is brittle
185928 Metal Primer Suppliers
Short on time? Let Metal Primer sellers contact you.
