Find Verified Hss Tangential Chasers Landis Type Suppliers, Manufacturers and Wholesalers

HSS TANGENTIAL CHASERS LANDIS TYPE (SET OF 4 PCS)
2.1/8 INCH x 15/16 INCH - USD 60.00
3 INCH x 1.3/64 INCH -------USD 60.00
4 INCH x 1.3/64 INCH -------USD 80.00
4 INCH x 1.7/64 INCH -------USD 80.00
4 INCH x 1.1/4 INCH--------USD 120.00
5 INCH x 1.1/2 INCH -------USD 380.00
5 INCH x 2.1/4 INCH -------USD 280.00


All the above said prices are for Free Delivery Worldwide to any Country.

This wood belongs to the shorea, which is a type of hardwood. It is most often employed in the making of furniture such as a bed, sofa, and also in flooring and roofing applications. Owing to its lightweight and light pink to light brown color variants, this wood is preferred for the interior designing. For this reason, we are facing a huge demand for the product.

Meranti is a medium density hardwood. The timber glues with common adhesives, nails easily and stains well allowing ready finished in a variety of interal and external above ground applications.

Color: Heartwood varies from pale pink to dark red, or from white to straw to yellow.

Sapwood cannot be reliably identified by colour difference

Origin: A tropical rainforest species found throughout South-East Asia and the islands of the South West Pacific region including the Philippines, Indonesia and east Malaysia.

Application: Plywood, interior furniture, general construction, concrete forms, veneer, and boatbuilding.

Item Specification
Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter
Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3)
Specific Gravity (Basic, 12% MC): 0.55, 0.66
Janka Hardness: 1,070 lbf (4,740 N)
Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa)
Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa)
Crushing Strength: 7,940 lbf/in2 (54.8 MPa)
Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2

This is a temperate hardwood. Oak tree has deep roots and grows on a heavy, wet soil. It grows from 65 feet to 130 feet in height with trunk as wide as 15 inches to 30 inches in diameter. White Oak is a rough barked tree of great and impressive girth. This is a strong rot-resistant, beautiful, easy to work, economical and holds exceptional value to woodworkers.

Features: Durable, Long-lasting, less likely to warp when exposed to sunlight, good water-resistant properties, highly resistant to wear and tear, ideal for liming, stains and polishes well, etc.

We can offer below types:

White Oakwood (Origin: France, Germany, Finland, Ukraine, Romania)

Red Oakwood (Origin: United States, Western and Central Europe)

Item Specification
Tree Size: 65-85 ft (20-25 m) tall, 3-4 ft (1-1.2 m) trunk diameter
Average Dried Weight: 47.0 lbs/ft3 (755 kg/m3)
Specific Gravity (Basic, 12% MC): 0.6, 0.75
Janka Hardness: 1,350 lbf (5,990 N)
Modulus of Rupture: 14,830 lbf/in2 (102.3 MPa)
Elastic Modulus: 1,762,000 lbf/in2 (12.15 GPa)
Crushing Strength: 7,370 lbf/in2 (50.8 MPa)
Shrinkage: Radial: 5.6%, Tangential: 10.5%, Volumetric: 16.3%, T/R Ratio: 1.9

Threading machine is used for cutting external thread on pipes by chasing method. Hss tangential chasers are used as cutters. Pipe remains stationery and die head rotates. Matric, bsp, bspt, npt, unf, unc, bsw, acme threads b.S.F etc. Threads can be cut on this machine depending upon the type of chasers.


Wooden box

Pipe and bolt threading machine.

These hollow cone nozzles work on the tangential flow principle and are manufactured by machine tool operation from metal bar stock. This offers versatile construction of small sized nozzles. In addition nozzles can be made on request from any special materials and alloys that are available as a bar stock. There are Following types of hollow cone nozzles: (1) Tangential Entry (2) Inline (Axial) Entry (3) Spiral Hollow cone. Design : Vaneless (Two Piece Construction ) Non clogging Application : Cooling & Washing of gas

Grindex is an Indian Diamond /CBN grinding wheel and HSS/Tungsten Thin Blade manufacturing company.We have more than 1500 types of grinding wheels.We can manufacture grinding wheels accourding to customer requirements for more information

1.Type: twist drill bits, center drill bits, short shank drill bits, tapper shank drill bits, spotting drill bits.
2.Material:hss, hss-e, carbide, etc.
3.Coating:tin, bright, ticn, etc.

Individual in plastic case.

Key Process: Roll Forged/Milled
Raw Materials: HSS 4241/4341/9341/6542/M35
Product Standards: DIN 345/DIN341/DIN1870/ANSI
Cutting Edge: 118° Chisel/Split Point / 135 Split Point 
Surface Finishes: Black Oxide/Coffee
Flute Type: Right Flute
Shank Types: Morse Taper Shank
Product Sizes: Metric Size(5.0mm-100mm)
Applications: Suitable for drilling general steel, alloy steel under HRC 35, iron,stainless steel.

·Material: High Speed Steel HSS Cobalt M35, M42
·Coated: Titanium
·Flute Type: Spiral Flute, helps evacuate chips up and out of the cut to reduce clogging
·Pitch: Coarse Pitch
·Hole Type: Blind Hole
·Tolerance: H1,H2,H3
·Size: M2-M27
·Working Material: Hardened Steel, Stainless Steel, Carbon Steel, Aluminum, Copper, Iron
·Working Machine: Lathe, Radial Drilling Machine, Bench Drill Machine, Pillar Drill Machine, Vertical Milling Machine

The CF3 series large format flatbed cutting plotters can handle an extensive range of applications up to 5 cm thick. It incorporates three exhangeable head types (router, reciprocating, or tangential head) and innovative cutting technology. For an effective print and cut solution, CF3 series can be combined with Mimakis UV curable flatbed printers, the JF series.

Supports both small and large size media up to 1.6m x 3.1m (63â?³ x 122â?³). Even difficult acrylic or aluminum composite panels can be cut with consistently high accuracy. User exchangeable cutting heads to suit a wide range of conditions widen your possibilities greatly.

The Cf3 series incorporates three exchangeable head types (router head, tangential head or reciprocating head) which allow for cutting a wide range of materials. Switching heads can be done relatively quick. Other tools, such as swivel cutter, pen tool, and creasing tool, are also available.



M head(router)
The M head is used exclusively for router cutting. With a high-speed spindle, rigid materials such as acrylic or aluminum composite panels can be cut easily, even up to 50mm in thickness.
The cut depth control function enables multiple cuts for especially thick materials.

·Material: High Speed Steel HSS M2(6542)
·Standard: DIN 345/DIN341/DIN1870/ANSI
·Process: Roll Forged/Milled
·Split Point: 118°/135°
·Surface: Bright
·Shank Type: Morse Taper Shank
·Morse Taper Shank No: 1 to 6
·Advantage: Perfect performance in sharpness, precision, smoothness and toughness
·Applied material: Stainless steel, high carbon steel, general steel, aluminum, alloy steel, cast iron

Standard: DIN352
Raw Material: HSS M35 / M2
Size: M1.2-M27
Type: Straight Flute Tap
Standard: DIN/ANSI/JIS
Hole: Blind hole/Through hole
Application: For through/blind Holes in Alloy Steel, Carbon Steel, Steel, Cast Iron, Copper, aluminum and so on.
MOQ: 100PCS
Packing: 1.bulk+carton+pallet 2.small box+carton+pallet 3.color box+carton+pallet 4.As you require
Payment Terms: L/C,T/T
Delivery Time: 5-30 Days after order confirmed

Specifications
Sawing Sharpening Machine
1> Easy to operate
2> The cutting angle, tooth shape and tooth depth on the saw are easy to adjust.






Condition: New
Type: motor
CNC or Not: Normal
Max. Grinding
Diameter: 500mm
Max. Grinding Length: according to customer requirement
Place of Origin: Hebei, China (Mainland)
Brand Name:
Model Number:
Voltage: according to customer requirement
Power(W): 2.2kw
Dimension(L*W*H): 700*700*1400
Weight: 250kg
Certification: CE
After-sales Service Provided: Engineers available to service machinery overseas
Machine Type: Saw blade sharpening machine
Function: Sharpening Sharpening
Capacity: OD Max 500mm
Control Method: motor
Working Method: Automatic
Delivery Time: 10-15 days
Process Material: HSS OR TCT

Advantages

1. Double cylinder, vertical cylinder is for clamping rebar, horizontal cylinder is for forging. And the two cylinders are almost move together, so forged speed is very high, 25mm rebar forged only 8-10 seconds will be finished.
2. Large cylinder outer diameter, so that large torque, 250mm/300mm (vertical cylinder/horizontal cylinder), easy to forging 40mm steel bar, and even up to 43mm steel bar, one of our clients tested 43mm bar with AGD-40 few month ago.

3. During the upsetting forged process, the male mold will not enter into the female mold, so male mold could be large enough. So that it will not be damaged frequently, (one of our clients upsetting forged 8600pcs 540MPA rebar, but it looks like original), and the forged head is complete and full, there is no deviation, so next step of screw cutting will be very accurate, and could increase your service life of chaser on thread cutting machine.

4. The mold is easy to replace, and only need to replace female mold to matching different size rebar, loosen the each 4 screws on the upper and lower molds, (AGD-40L type, press 'Replace Mold' button, then loosen the 4 screws on the lower mold), and then backward the horizontal cylinder to the end position of the cylinder, the old mold can be taken out at the top of the horizontal cylinder.

5. Automatic Counting Function can be displayed on the screen, to conveniently statistic working efficiency of workers (AGD-40L).

6. If you feel that the forged end is not full/too full, only adjust the horizontal cylinder's distance(initial position), but no need to adjust the pressure.
7. After setting the steel bar size on the machine once, you only need to press the foot switch for each time, no need to set it again, until the whole machine powered off.


Model No.
AGD-32
AGD-40
AGD-40L
AGD-45