Find Verified Hms 1 2 Used Rails Suppliers, Manufacturers and Wholesalers

C 0.54 -0.82

Si 0.18 - 0.40

Mn 0.60 - 1.05

S 0.04 max

P 0.035 max

As
0.01 max of Mass share

Norms
R-50 GOST-7173-75 and R-65 GOST-8165-75

R50 (51.67 KG/M) GOST 7173-75

R65 (64.72 KG/M)
GOST 8165-75

In ferrous we mainly deal in HMS1 & 2 Material Specification Heavy Melting Scrap (HMS 1& 2) ,80% HMS 1 & 20 % HMS 2 confirming  to ISRI 200-206
HMS 1 ISRI Code 200: heavy melting steel. Wrought iron and/or Steel scrap inch or steel scrap inch and over in thickness. Individual pieces not over 60 x 24 inches
HMS 1 ISRI Code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap
HMS 1 ISRI Code 202: heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap
HMS 2 ISRI Code 203: heavy melting steel. Wrought iron or Steel scrap, Black and Galvanized.
1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel.
HMS 2 ISRI Code 204: same as ISRI 203 but max size 36-18 inches.
HMS 2 ISRI Code 205: same as ISRI 204 but free of sheet iron or thin-gauged material.
HMS 2 ISRI Code 206: same as ISRI 204, but max size 60 x 18 inches

We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc

Commodity:
HMS 1 AND 2
Used Rails R50-65 $160 Gross Per Mt / $150 Net Per MT

We are offering the following scrap metals below from our scrap yard in Phnom Penh Cambodia to our responsible buyers on CIF ASWP. 1. HEAVY MELTING SCRAP 1/2 5000MT X 12 MONTHS CIF ASWP USD320/MT 2. COPPER WIRE SCRAP 2000MT X 12 MONTHS CIF ASWP USD3200/MT 3. ALUMINUM SCRAP 2000MT X 12 MONTHS CIF ASWP USD360/MT 4. ALUMINIUM UBC CAN SCRAP 2000MT X 12 MONTHS CIF ASWP USD720/MT ORIGIN: CAMBODIA

We are Kindly informing buyers that. We are the direct owner of Metal scraps and we presently have Used Rails and HMS 1/2 metals scraps for sale at a very reasonable price.Chemical composition: International Standards as follows: R50 51,67 kg/m GOST 7173-75 C: 0.67- 0.8%; Mn: 0,75 - 1.05 %,Si: 0.13 - 0.28 %; P: max. 0.035 %;S: max. 0.045 %; Ar: max. 0.15 % R65 64.72 kg/m GOST 8165-75 C: 0.6 - 0.82 %; n: 0.75 - 1.05 % ; Si: 0.13 - 0.28 %; P: max. 0.035 %; S: max. 0.045 %; Ar: max. 0.15 Specification: Used Rail:R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75) 2.7Length of commodity: CUT TO A DIMENSION OF 1.5m (m=meters)AS MAXIMUM, Or as the buyer requests, preferably the length is 12.5 meters, as is the original length of the product. delivery is worldwide. and yard visit is accepted at any time of the buyer's choice. our prices are negotiable.we do both bulk and container loading. Interested buyer, kindly contact us for more details and Full corporate offer (FCO).

Please note that all the above prices are our direct warehouse prices and does not include any processing or local transport and cutting service cost.
Buyers will have to arrange for their own local processing company to process materials and make them available in the port of loading for seller to take over to shipment.
Seller can only assist buyer to link him up to any available local processing company for the actual fact that buyers are not here in south africa and does not have any idea or knows any processing company.
Buyers are also allowed to bring their own processing company to south africa to take on the processing service. All cost of materials processing of any kind will be buyer own separate cost and buyer should treat the cost of materials processing absolutely separate from the price of the materials.
All prices given are cif price excluding materials processing cost (take a very note of that)
According to the our cif price terms, seller company will be responsible for only all local governmental taxes impose, insurances value of 110%, and ucb inspection cost and final shipping cost to buyer port.




Cut and containerized or bulk

Hms 1&2 used rails
Heavy melting steel only

Loose in containers

We are importers for used hms1/2 rail scarp . We can import and ship world wide. Our payment terms is 100% lc at sight . We can ship cif/fob destination port .

Specification of Used Rail R50/R65:
Used Rail - GOST R-50-R65
R50 (51.72 Kg / Meter) GOST 7173-55
R65 (64.72 Kg/Meter) COST 8161-75

Chemical Composition of the steel scrap is of international standard as follow:
MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max.

MOQ contact: Used rails R50-r65 15,000mt x 12 months
MOQ contact: HMS1/2 15,000mt x 12 months

Specification of Used Rail R50/R65:
Used Rail - GOST R-50-R65
R50 (51.72 Kg / Meter) GOST 7173-55
R65 (64.72 Kg/Meter) COST 8161-75

Chemical Composition of the steel scrap is of international standard as follow:
MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max.

MOQ contact: Used rails R50-r65 15,000mt x 12 months
MOQ contact: HMS1/2 15,000mt x 12 months

Metal Scrap
(1) isri codes r50-65 and the specification in appendix no.2 hereto
(2)isri codes r50-65 and the specification in appendix no.2 hereto


Bulk

SPECIFICATIONS:

the following Percentage Points:

Chemical Composition

Carbon - 0.54 to 0.82%

Phosphorus - 0.035% max

Manganese - 0.60 to 1.05%

As. - 0,01max of Mass share

Silicone - 0.18 to 0.40%

Sulphur - 0.035% max

Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75

The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)

Used Rails shall be considered free of alloys when the residual alloying elements do not exceed

Cut to 1.5 meter length (standard)



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.

The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.

Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

Hms 1, hms 1&2, used rail
We're the representative of american steel scrap seller group. We sell all metal scrap. Original products are in america so you can trust in quality and price. We sell 30, 000 mt per shipment at least.

Bulk

Used metal scrap hms 1&2, used rails Used Rail Scrap

Offer Description - Used metal scrap hms 1&2, used rails Used Rail Scrap
USED RAILWAY STEEL SCRAP



Price of product ( USD price or FOB price) : USD 170 per MT


Key Specifications/Special Features :
1ST- Product: R50-R65 Used rail steel scrap
2ND- Specification: ISRI 200â?? 202,1- R50-R60 AND R65 with (ISRI) standard classification,- R50-R60 ( 51.67 KG/running meter),- R63-R65 ( 64.72 KG/running meter), Lengths from 6 MS TO1.25 MS,
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15% * NORMS : R-50GOST-7173-75 AND R-65 GOST-8165-75,R50 (51.67 KG/M)-GOST-7173-75R65 (64.72 KG/M)-GOST-8165-75,Cutting:1 - 1.5 - 6 - 12 meters (or other cuts) Cutting: 1 - 1.5 - 6 - 12 meters (other cuts).

Chemical Specification/ Composition :
Carbon - 0.2% to 0.60%
Manganese - 0.80 to 0.90%
Silicon - 0.15 to 0.35%
Sulphur - 0.05% Max.
Phosphorus - 0.06% Max.
1. Origin : Romania
2. Destination: ASWP
3. Delivery Schedule: Seller to specify for completion of total quantity and first shipment from date of confirmed L/C in sellers account;
4. Payment Terms: CIA (Confirmed, Irrevocable, At Sight), transferable and revolving L/C payable in US dollars. 100% at sight of shipment against receipt of all documents required within 5 days of the contract signing from a top 25 world bank.
5. PBG Guarantee: 2% operative PBG to be issued by the seller. The seller will not agree to any additional penalty.
6. Inspection : SGS by seller.
7. Quantity : 30,000 MT x 6
8. Packing : Container Price : USD 297 per MT (CNF)
9. Packing : Break Bulk Price : USD 267 per MT (CNF)

Procedure :
1. Prospective buyer gives LOI and BCL.
2. Seller verifies LOI and BCL thru soft probe, then only forwards the draft contract.
3. Seller and Buyer negotiate and finalize the draft contract.
4. Seller releases final contract for signing by both parties.
5. Buyer opens CIA (Confirmed, Irrevocable, At Sight), transferable and revolving, non v operative L/C payable in US dollars.
6. Seller issues Performa Bond guarantee for 2% of the value of the L/C.
7. Seller provides POP (Proof of product given bank to bank)
8. Buyer's L/C becomes operative
9. Shipment commences


Break bulk & containers

Steel scrap
Hms 1 & 2 conforming to isri 200 - 206 and used rails conforming to r50 - r65

We are able to arrange supply of min 30000 tons per shipment as spot deal or 30000*12 as yearly contract.

HMS 2 Scrap :HMS 1 HMS 2 METAL SCRAP / USED RAILS / CAST IRON FOR SALE !
Used Rails R50 - R65, At Best Price/Used Rail Scrap for sale /Used Railway Track in Bulk Used Rail Steel Scrap
HMS 1 and HMS 2 Scrap Heavy Melting Scrap

Product Name rail steel
Specifications 38Kg/m 43Kg/m 50Kg/m 60Kg/m Length 12M,
or customized as required
Standard ASTM, JIS, DIN, GB,
Steel Grade ASTM A2008 JIS 1103-91 DIN 536 GB/T 2585
Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size
Inspection, , X-ray Test.
MOQ 1 Ton
Delivery Condition Forged +Rough Machined (Black Surface)
Application scenario Train tracks, cranes, construction
Processing Service Welding, Drilling, Cutting, Bending
Packing Wooden pallet or according to customer's request
Lead time 7 to 15 working days
Payment terms T/T
Quality Excellent