Gluer Machine Applicable Paper Width: 1,400-2,300 mm
Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;
* Separate motor drive, frequency conversion control.
* Glue roller surface is treated by special mesh snicked and chromeplated. Glue gelatinizing roller and pressed roller is exactitude milled and chrome plated.
* Pneumatic control the dual paper pressed roller system, smart and convenient.
* Auto-cyc feeding glue, prevent glue liquid from depositing.
* Matched warm-up set, this will speedup glue liquid burnted.
Gluer Machine Applicable Paper Width: 1,400-2,300 mm
Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;
7. Layered independent frequency conversion motor, synchronous belt transmission and relatively independent control are used in the power part to ensure the precision of transmission and to greatly reduce the vibration and noise during operation;
8. Layered independent adjustment and touch panel man-machine interface control are employed, so the adjustment and control are more flexible and directviewing;
9. The floating roller of the pre-heating cylinder is electrically adjustable (this function is optional to users) to facilitate paper passing through and adjustment of angle of contact.
GLD6A glue applying machine for 2-layer corrugated cardboard.
Paper Width External Dimensions
Weight
(T) Whole Machine Power
Method for making the glue
Process:
1., water: 2kg.
2., glue powder: 1kg (1 bag), put into the water and mix up.
3., 96% caustic soda 0.035kg (in winter), 0.03kg (in summer), and borax 0.02-0.025kg, add into 0.6kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.)
4., tributyl phosphate (ar grade) : 1 cap (use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (note: this product is mainly used as a defoamer, please donâ??t add too much, or it will effect the viscosity of the glue.)
this machine can be used in Filter, cabinet, lighting, battery, etc.
Gluer for project of vehicle water drop channel
Major components of the equipment: six-axial robot, double-component polyurethane precision glue supply system, precision double-component gluing head, left-right alternative gluing platform, AB glue automatic feeding system, tool and control system, etc. Automatic loader and unloaded devices are allowed as required by client in order to satisfy with individual demands.
125499 Glue Machine Suppliers
Short on time? Let Glue Machine sellers contact you.
Additional configurations / functions list (these are options base on materials and production requirements with additional cost)
1:Available in touch screen operation
2:Available in 10, 30, 60 liters tanksâ?? sizes (customize is welcome with additional cost)
3:Available in Dynamic or Static valve (depends on materials)
4:Agitate motor (tank stir)
5:Tank heating jacket (Silicone heater with auto regulator)
6:Heating hoses (depends on materials)
7:Mixing valve and mixing nozzle automatic flushing clean system
8:Pump pressure sensor (Monitoring the materialsâ?? pump pressure, in case if over or under pressure, it will stop and alarm to alert,optional function)
9:Mixer tube clogging sensor (for dynamic valve, monitoring the mixing tube in case if clogged, it will alarm in 1-3 sec. to alert optional function)
10:Pump sizes, available in 3cc, 8cc, 12cc, 24cc, and so onâ?¦ (it is determined by dosing speed, and volume)
11:Available in multiple dispensing valves or nozzles, such as 1, 2, 4, 6
12:Secondary pumps (e.g. when transit material from a larger pump to a second pump with very small volume required, it is determined by the dosing volume)
13:Pallet or fixture (depends on)
14:Machine additional safety protection (Moving robot cover, or safety light curtain)
Epoxy resin potting example:
Pouring products: safety capacitors; you can also view other product potting case videos
Pouring process: Place the product on the neatly placed fixture, and perform three-axis linkage trajectory potting to automatically pot the neatly placed products;
1. supplier Company name : Hangzhou ROYALL Import & Export Co. Ltd.
Department: qualityment Responsibler: zhangli xue
2. name of product : GLUE POWER
3. Ingredients of product]
Composition content:
Corn starch 90%
Silicate mineral filler 5%
Carbonate filler 3%
Sodium borate chemical compound 2%
4. dangerous Nonpoisonous, innocent. Easy fire when heating
5. emergency measure When into eye: please wash 15 minutes directly ,then go to The ophthalmology seeing a doctor, is cured
6. Conflagration measure Method of cutting out an engine. Prompt transfer the starch to the safe place . When being able to not transfer, the bag covers package with the wet woolen blanket.
7. Disclose measure The amylum starch by the empty space package bag to reclaim. Then Use water to wash, Wash water not discharging to the river or sea
8. Handle and storage time Be careful about water and dust, The working site carries out sufficient circulation of air
Storage: Plastic weaves bag package , the storing place in ventilation gloomy and cold.
9. Protect an implement Protect the glove , the dust prevention gauze mask , protect a mirror , protect clothes
10. Physical chemistry character Appearance : white powder
Smell: insipid
Specific gravity :1.2
Solubility :water dissolve,
Other: alkali character
11. Hazardous wastes
Boiling point: No.
Stability*Reactivity: Can be connected with the water in air slowly.
Other: No.
12. Hazardous wastes No.
13. Environmental effect :No
14. Paying attention to the environment being handled Put the starch into the package bag, not coming out from package bag when being fond of carrying.
15. Shipment Make sure the bag is not broken. No other requirement.
16. Suitable rules According to
17. Other No
1. Company name : Hangzhou ROYALL Import & Export Co.Ltd.
2. name of product : GLUE POWER
3. Ingredients of product]
Composition content:
Corn starch 90%
Silicate mineral filler 5%
Carbonate filler 3%
Sodium borate chemical compound 2%
4. dangerous Nonpoisonous,innocent. Easy fire when heating
5. emergency maesure When into eye:please wash 15 minutes directly ,then go to The ophthalmology seeing a doctor, is cured
6. Conflagration measure Method of cutting out an engine. Prompt transfer the starch to the safe place . When being able to not transfer, the bag covers package with the wet woolen blanket.
7. Disclose measure The amylum starch by the empty space package bag to reclaim. Then Use water to wash, Wash water not discharging to the river or sea
8. Handle and storage tiem Be careful about water and dust, The working site carries out sufficient circulation of air
Storage: Plastic weaves bag package , the storing place in ventilation gloomy and cold.
9. Protect an implement Protect the glove , the dust prevention gauze mask , protect a mirror , protect clothes
10. Physical chemistry character Appearance : white powder
Smell: insipid
Specific gravity :1.2
Solubility :water dissolve,
Other: alkali character
Two component foam gasket machine
For small size workpiece
Foam gasket machine Application:
Is mainly used for cabinets, distribution cabinets, explosion proof shell, low ark,
automobiles, home appliances, lamps and lanterns, filters, etc. various sealing need products and parts.
Glue spreader is used for spreading glue Uniformly on veneers. Uniform gluing with the exact figure of adhesives improves the quality of plywood and saves a huge amount of expense in the long run. The clearance between the glue rolls and the doctor roll, in which a stepless change in rotation is available, can be freely adjusted according to the viscosity and the amount of glue to be spread. The waste scrapes the glue roll. When it inserts to the clearance either between the glue rolls; or between the glue roll and the doctor roll, the rolls are separate quickly by air cylinder. So, the wastefall down and cannot scrape the glue roll. This Machine has VFD (Vector Frequency Drive). It can control stability of the running motor and the horse power of the output. At the operation the exchanged velocity, it can adjust easily the needed gluing velocity according to the actual gluing situation. (Nonstep speed change).Besides, this machine is specially equipped with an emergency stop switch which can immediately stop the running machine in emergency conditions. The operator can activate the emergency stop switch within a very short time to ensure the safety of the operator.
Main Rubber Rolls 400 mm Dia x 2700 mm Length x 2 Sets
Doctor Rolls 250 mm Dia x 2700 mm Length x 2 Sets
Clearance Between Rubber Rolls 0 70 by handle.
Adjustment of Doctor Rolls One Touch Controlled by Pneumatic System &
Fine adjustment by handle with revolution
indicator.
Motor for Outfeed Conveyor 0.75 Kw (1 H.P.) with VFD.
Motor for Main Roller Drives 7.5 Kw (10 H.P.) with VFD & Imported Gearbox.
Brief Introduction :
Shenzhen XHL Industrial Development Co., Ltd is professional in researching and manufacturing high quality glue dispenser machine , glue potting machine ,glue mixing machine ,LED silicon Strip extrusion machine , automatic Robert screw locking machine and automatic soldering machine etc automatic equipment. The products are using for LED , Widely used in arts and crafts (stickers, patches, trademark paper, cartoon paper, label, photo album), digital electronics, LED waterproof power supply, smart card signage, IC card, trademark, logo label (circuit board, PCB), clothing accessories and so on .
Our glue machine can Suitable for all kinds of two-component glue, such as double-liquid glue, AB glue, silica gel, epoxy resin, PU glue .
All of our machine can be acceptable customized with your required size and function.
Service : Free testing , One year Warrantee ,and lifetime Service .
Our machines can use for assembly production line .Welcome to ask for inquiry .
Hope to cooperate with you sincerely .
Product specification: xhl-314Z input voltage: 110v-220vac (internal switch)
System: PLC program control mode: automatic cycle/pedal
Internal voltage: DC24V motor speed: 10-250 RPM (adjustable)
Power: 12W
speed: 3-8 seconds/unit (depending on product size and length)
Glue length: 0.5 -- 25 CM
input pressure: 2---7 kg /CM
Applicable screw diameter :M5 -- M30 output pressure: (adjustable) 0.1-- --5 kg/m2
CJ6+ OCA glue remover tool for mobile phone pads tablets glass touch sceen glue cleaning. Electric hot glue clean machine CJ6+ handheld glue remover for Phone Screen LCD OCA Glue Cleaning.
Specification:
Purpose: Professional mobile phone LCD screen electric cleaning tool, used to remove glue.
Size: 15.5x10.5x4.5cm / 6.1x4.1x1.7 inch
Electro-motor Size: 11.5x4.5x2 cm / 4.5x1.7x0.7 inch
Material: plastic/metal.
Features:
In addition to the use of brushless high precision imported motor, the OCA glue removal tool is also very safe and efficient.
It is designed with automatic protection function (more than the maximum torque will take automatic protection), more secure.
It is used for rolling or removing the OCA glue on mobile phone LCD screen with very safe, convenient and efficient operation.
Can remove OCA glue, apple whole series of original glue, OPPO, VIVO and many cell phone liquid crystal glue.
The phone fix assistant is an ideal solution for , Samsung, Oppo and any other cell phone LCD repair.
Precautions:
The principle of OCA glue removal tool is to use the fine needle to roll up the OCA glue on the screen;
Before use, the screen can be placed on the adhesive pad or vacuum separator, try not put the screen with backlight on the separator after heating;
In the process of removing glue, hold one of the fine needles, and the other hand control the motor switch;
When the fine needle film glue to a certain amount, pay attention to take off some glue, when the tool roll too much glue and cannot work smoothly, control the button both clockwise and counterclockwise on motor.
Quantitative double-component glue filling machine, mainly apply to the fixed ratio mixing of two-component glue and quantitative focused demand. Glue can be either polyurethane or epoxy resin or other materials. Main applications: automotive filters, heat preservation products, steering wheels, seat cushions, filling materials, plates, toys, fitness equipment, or other equipment with quantitative glue demands.
Product Content Description:
8L Hot Melt Gluing Machine
SPECIFICATION
Tank capacity8LMelt rate kg/hr12KG/hr
Power supplyAC220V,50/60HzMotor power3KW
Gear pump (optional)10cc/rev Temperature control stability±1
Machine Dimension mm680mm*400mm*500mm L/W/HMotor10CC x 1D
Maximum gear pump rate802rpmTemperature range40--230
Hose/Gun output capacity2 setAmbient temperature range6--50
Motor and pump Capacity1setControl modelPID numeric controller
FEATURES
1.Using the lid type rubber barrel, convenient to add, replace. rubber barrels prevent from glue block pollution and clogging
2.with good control of fluorine rubber sealing ring. High temperature resistance,, corrosion resistance, acid and alkali resistance.
3. gun directly Spray sizing on the material, and quick back to the suction function to prevent leaking glue due to doesn't close gun tightly
Warning:
1.Do not quickly twist ,swing , bend when you movement
2.Do not start to adjust the machine when hose piping temperature is not heated, in case the hose piping damaged by rest of the hot melt adhesive .
3.Do not rub,cutting , pressure by knife , iron ,sword of the objects
4.If happen to accident ,please immediately inspection and treatment
Application
Maternal and child supplies, book binding, packing industry, auto industry, the assembling of furniture and mattress.
Hot melt glue dispensing machine
Hot Melt Dispensing Equipment Manufacturer
Package machine
Packaging machine
Package machine for gift box
- Control system - Digitally controlled
- Gluing Speed - 24 m/min
- Application Roller - Rubbed With Grooves
- Application Roller Diameter - 200 mm
- Inlet Traction Rubber Rollers - Yes
- Max Working Width - 300 mm
- Working Thickness - From 8 to 20 mm - Adjustable
- Adjustable Glue Application Thickness - Yes
- Dedusting Brushes - Inlet type â?? one brush up + one down
- Brushes Hood Outlet - 2x100 mm
- Total Power - 0.55 kW
- Dimensions - Cc. 585x555x1175 mm
- Weight - Cc. 180 kg
Program Display:LCD
Programming mothod:Teach pendant
Power supply:AC90-260V 450W
Working Temparature:0-40
Working relative Humidity:20-90% condensation
Parameters:
Model:ZXD-221
Working range:200x200x100mm(XYZ axis)
Max Load:10kg/5kg
Speed X&Y/Z(mm/sec)0.1-800/350
Resolution:0.01mm/Axis
Repetive Positioning Accuracy:±0.02mm/axis
TH-2004D-300ML
Benchtop dispensing robot for Hot melt adhesive glue
Patent Numberï¼?ZL 2010 2 0120765.6
FEATURES
1.Feed system of hot melt heating tank.,avoid frequent add glue,Good for granular and striped solid hot glue.
2.Precision heating Valve is Precision suck back valve, close glue quickly,ensures no dripping
3.High precision liquid controller system.
Application:
Good for hot melt spraying and coating on clothes and carve cards,Diaper wet.
Liquid Material: hot melt glue,hot melt adhesive.
Packing capacity:granular hot melt adhesive and striped solid hot glue.
Specification :
ITEM TH-2004D-300ML
X/Y/Zworking range 300 x 300 x 100mm
Dimensions (WxDxH) mm 500 x 580 x 610
Weight 34kg
Standard CE Approved
XY/ZMaximum Load 10 kg / 3 kg
XY/Z Speed 800/350 mm/Axis
Data memory capacity 9999programs
Display way LCD display
Drive System Precision micro-stepper motor
Transmission Timing Belt/ Precision Linear Guides
Edit Programming Handheld Programmer
I/O Signals 4 Inputs / 4 Outputs
Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ
simultaneous (CP) 3D
Power Supply AC110V/220V Internal conversion
Working Temperature 0 ï½?40
Relative Humidity 20ï½?90% (no condensation)
Help you more :
· Increase production efficiency
· Promotion processing precision control
· Improve product quality
· lower production costs, reduce rejected product
· Eliminate material waste
125499 Glue Machine Suppliers
Short on time? Let Glue Machine sellers contact you.
