Product content description:
400mm hot melt gluing machine
Specification
Gluing , speedmaximum , 100m/min (adjustable speed)gluing , rate0-50g/ã?¡
Rollerthe , diameter of roller, , s embossing is 0.8mm, thickness :0.1-0.2mmmaximum , product sizel:400mm , w:20mm
Roller , diameter80mmglue groove , capacity5l
Machine , dimension600*420*700 , l/w/h , mmmelting , rate10l/hr
Power/voltage3kw/220vmaximum , glue temperature230, ,
Features
1.The thickness of the glue can be adjusted( according to the glue, , s density )
2.If it has an upper wheel, it is extensible, automatically adjust to the uneven thickness of the product(equipped with spring).
3.Machine with an upper wheel is half hot and half cold(the upper, cold, vise versa)
4.The temperature of glue groove and glue wheel is separately controlled.
5.Only suit for international standard k type temperature sensor.
6.It, , s safety protection prevent your hand from accidentally squeezing by the roller.
7.It has a on the glue tank and it can be opened freely.
8.An anilox roller
9.The glue tank is made of aluminum , which has a good thermal conductivity so as to save the energy. It has a slope, the glue will flow down thoroughly. The glue roller won, , t leak any glue because the machine is processed with cnc, it is sealed around the oil seal that is by the side of wheels. Some essential part, has professional anti-sticking processing to stop the glue from carbonization ,
Application
Pearl cotton styrofoam, , assemble paper box , paper carton, gluing shoe, clothing, leather.
Product Content Description:
8L Hot Melt Gluing Machine
SPECIFICATION
Tank capacity8LMelt rate kg/hr12KG/hr
Power supplyAC220V,50/60HzMotor power3KW
Gear pump (optional)10cc/rev Temperature control stability±1
Machine Dimension mm680mm*400mm*500mm L/W/HMotor10CC x 1D
Maximum gear pump rate802rpmTemperature range40--230
Hose/Gun output capacity2 setAmbient temperature range6--50
Motor and pump Capacity1setControl modelPID numeric controller
FEATURES
1.Using the lid type rubber barrel, convenient to add, replace. rubber barrels prevent from glue block pollution and clogging
2.with good control of fluorine rubber sealing ring. High temperature resistance,, corrosion resistance, acid and alkali resistance.
3. gun directly Spray sizing on the material, and quick back to the suction function to prevent leaking glue due to doesn't close gun tightly
Warning:
1.Do not quickly twist ,swing , bend when you movement
2.Do not start to adjust the machine when hose piping temperature is not heated, in case the hose piping damaged by rest of the hot melt adhesive .
3.Do not rub,cutting , pressure by knife , iron ,sword of the objects
4.If happen to accident ,please immediately inspection and treatment
Application
Maternal and child supplies, book binding, packing industry, auto industry, the assembling of furniture and mattress.
Hot melt glue dispensing machine
Hot Melt Dispensing Equipment Manufacturer
Package machine
Packaging machine
Package machine for gift box
Stick ice lollipop ice filling sealing machine
The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity .
Product parameters of one :
Voltage: 220/50 (V/Hz)
Power: 0.75KW
Sealing speed: 2000 cups/hour
Filling capacity 0-150ml
Specification: 960 * 430 * 330mm
(Welcome give thumbs-up, comment,transmit)
welcome order !
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
SLS�Manual cold saw machine with function of manual clamp,manual feeding and manual cutting. Machine can be realized angle cutting which greatly increase the cutting feasibility. Good mechanical system ensures high cutting quality without burrs on tube internal and external. Water cooling and lubricate system prolongs the life of machine and saw blade.�
Each cold saw is covered by a�one year parts warranty�plus�lifetime technical support by�SLS.We keep many cold saw models�in stock for quick shipments.
STANDARD
Manual feeding, Manual clamping and Manual cutting��
Strengthened and high precision flexible cutting head (2 sides 45�): Able to adjust angle freely, High precision of angle, Easy and quick adjustment.� � � �
2 sides and 2 way clamping system: High precision cutting, reduce vibration and soundless while cutting.
Material Available: Steel&Stainless Steel
Cutting Shape Available: Round,Square,Rectangle, circular saw machine and other profiles...
Available for several pieces cutting together for small pipe size.
Length stopper improve the accuracy of cutting length.
Good mechanical�parts ensure machine runs in high stability.��������������������������
CE, ISO9001 Certification� �
�
OPTIONAL
Tube Material Supporter for long tube
Special clamp jaw for special pipe size
CNC Heating/Cold Bending Machine for Angles And Plates, CNC Heating Bending Machine for Plate, CNC Cold Bending Machine for Plate, CNC Cold Bending Machine for Angle
CNC Machine for Steel Tower
APPLICABLE INDUSTRY:
The machine is mainly used for bending angles mainly in the field of power and telecommunication industry.
ADVANTAGES:
This machine is equipped with full set of moulds, replacing moulds in fast speed.
CNC technology controls stroke; memorized working function can repeat process any time.
High-precision workpiece, saving labors.
All of these models can be customized according to customer requirements.
Model LQ20
Max. Bending Force (kN) 3150
Angle Bending Size (mm) Both Faces of Inner and External
50*50*3~200*200*20
Side Face of External 50*50*3~200*200*14
Side Face of Inner 50*50*3~200*200*12
Bending Degree (°) Both Faces of Inner and External 180°±50°
Side Faces of Inner and External 180°±40°
Max. Width * Thickness (mm) 700*20
Min. Bending Degree (°) 90°
CNC Axis 1
Hydraulic Unit Motor Power (kW) 22
All of these models can be customized according to customer requirements.
Hot Sale cnc machine for drilling, punching, milling, shearing, sawing, bending, roll forming, hole processing. The Machine is used for Plate, Angle, Flange, Connection Boards.
For more product information, please click here.
