6.Full Auto Pipe Cutting Machine
Pipe Cutting Machine
Model:�MC-400NC
Max. Cutting Capacity:ï¿½ï¿ 120mm
Cutting Degree:�90�
Automatic Feeding Way:�Cylinder
Blade Rotating Motor Power:�4.5/5.5 KW
Water Pump Motor Power: 90W
Hydraulic Pump Motor Power:�4KW
Feeding Length:�6-700mm/time
Blade Rotating Speed:�120/60 Giri/min
Hydraulic Pressure:�45-70kgf
Available Saw Blade Size:ï¿½ï¿ 250/275/300/315/350/400mm
Machine Dimension:�2800*1100*2000
Machine Weight:�1680kgs
SLS�automatic pipe cutting machine with function of hydraulic clamp,hydraulic feeding and hydraulic cutting.Automatic feeding ensure high cutting accuracy and increase productivity. Good mechanical system ensures high cutting quality without burrs on tube internal and external. Water cooling and lubricate system prolongs the life of machine and saw blade.�Each cold saw is covered by a�one year parts warranty�plus�lifetime technical support by�SLS.We keep many cold saw models�in stock for quick shipments.
STANDARD
Automatic Hydraulic Feeding,Automatic Hydraulic Clamping and Automatic Hydraulic Cutting.
�Rigid�cast iron saw bases and electro-welded steel frames�maintain accuracy and minimize vibrations, even at full capacity.
�Material of cold saw machine is available:Steel&Stainless Steel.
�Cutting Shape Available: Round,Square,Rectangle and other profiles.
�Available for several pieces cutting together for small pipe size.
�2 sides and 2 way clamping system: High precision cutting, reduce vibration and soundless while cutting.
�Clamping, saw blade advancing,backward, clamp releasing�are all hydraulic�driven.
�Good mechanical�parts ensure machine runs in high stability.�������������
�CE, ISO9001 Certification.
OPTIONAL
�Tube Material Supporter for long tube
�Special clamp jaw for special pipe size
1.Semi-Automatic Tube Bending Machine
Tube Bending Machine
Model:Â SB-38NC
Max. Bending Capacity:Â ï¿ 38.1 (1.5�??)�?2mm
Bending Degree: 0-190°
Bending Radius:Â 20-200mm (for machine)
Min Bending Radius: R�?�1.5D (for pipe)
Mandrel Length:Â 2000mm(can be customized)
Max. Bending Speed: 90°/s
Bending Accuracy: ±0.1°
Motor Power:Â 4 Kw
SLSÂ Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.
STANDARD
Bending Axis-by Hydraulic ,Feeding Axis-by Manual,Rotating Axis-by Manual.
Human Interface offers easy access to auto and manual operating modes.
Fully hydraulic movement on clamp die,pressure die and mandrel.
Available pipe material: steel, stainless, aluminum, titanium and brass...
Available pipe shape: Round,Square,Rectangle,Oval,Solid Bar,other profiles...
Equiped with encoder ensures the accuracy and stability of bending.
Equiped with adjustable speed valve on pressure die ensures the synchronization of bending.
Water cooling system ensures the equipment long-time work stably under the high temperature.
CE&ISO 9001:2000
OPTIONAL of Tube Bender
Automatic pipe rotating(by servo motor) or Automatic pipe feeding(by servo motor)
Anti-clockwise bending
Extra mandrel length
Pipe punching function
PLC controlling
Tie rod bars on bending arm
Feeding length positioner
Mandrel lubrication function
Air cooling device
Cooling Conditioner
Safety mat
TOOL:
STANDARD MATERIAL: 45# STEEL
OPTIONAL MATERIAL:
Ampco Bronze- Mandrel&Wiper die for Stainless Steel Pipe
Nylon- Bending die,Clampe die&Pressure die for Aluminum Pipe
Cr 12-For other pipe material
ACCESSORIES:
TOOL,TOOL BOX, MANUAL OPERATION, INSTALLATION DVD, SPARE PART
SLS�Manual cold saw machine with function of manual clamp,manual feeding and manual cutting. Machine can be realized angle cutting which greatly increase the cutting feasibility. Good mechanical system ensures high cutting quality without burrs on tube internal and external. Water cooling and lubricate system prolongs the life of machine and saw blade.�
Each cold saw is covered by a�one year parts warranty�plus�lifetime technical support by�SLS.We keep many cold saw models�in stock for quick shipments.
STANDARD
Manual feeding, Manual clamping and Manual cutting��
Strengthened and high precision flexible cutting head (2 sides 45�): Able to adjust angle freely, High precision of angle, Easy and quick adjustment.� � � �
2 sides and 2 way clamping system: High precision cutting, reduce vibration and soundless while cutting.
Material Available: Steel&Stainless Steel
Cutting Shape Available: Round,Square,Rectangle, circular saw machine and other profiles...
Available for several pieces cutting together for small pipe size.
Length stopper improve the accuracy of cutting length.
Good mechanical�parts ensure machine runs in high stability.��������������������������
CE, ISO9001 Certification� �
�
OPTIONAL
Tube Material Supporter for long tube
Special clamp jaw for special pipe size
Pipe End Forming Machine(Expanding, Shrinking...)
Pipe End Forming Machine
Model:Â TM-40
Max. End Forming Capacity:Â ï¿ 40�?2mm
Max. End Forming Stroke:Â 100mm
End Forming Speed:Â 100/3-4 mm/sec
Max. Working Pressure:Â 12 Mpa
Motor Power:Â 4 Kw
SLSÂ Pipe end forming machine is a kind of high efficiency,automatic machine. It can be do different types of end forming as reduction, expansion, beads, flare and thickening.Each of these categories has special requirements and is used in a variety of applications. It is controlled by hydraulic and electricity at the same time.It combines easy-to-use operation with high end forming accuracy and cost effectiveness.
STANDARD
Human Interface offers easy access to auto and manual operating modes.
All the parts are made under very strict quality control, so the quality of machine is in high level and the specification is standardized.
Equipped with emergency stop device. Both manual and automatic operations are available.
Tube clamping and end forming driven by hydraulic.
Available pipe material: steel, stainless, aluminum, titanium and brass...
The design of the tooling help customer easy to change.
Water cooling system ensures the equipment long-time work stably under the high temperature.
CE&ISO 9001:2000.
OPTIONAL
Multi-stations
PLC &Touch Screen Controlling
Safety Cover
Production Line
Pipe Notching Machine
Pipe Notching Machine
Model:Â NM-50Y
Max. Notching Capacity:ï¿ 50mm
Notching Degree Available:Â 15-180
Notching Time:Â 3-4s/100mm
Hydraulic Motor Power:Â 5.5 Kw
Max. Oil Pressure:Â 14Mpa
SLS Pipe Notching Machine which scallops tubes that need to be welded together rapidly and accurately. Notching round or square tubes at 90 or at an angle can be achieved on steel, stainless steel and various other metals. Pipe clamping and notching work automatically driven by hydraulic.Automatic and manual working mode which are convenient for adjusting the machine,mold and notching knife. It combines easy-to-use operation with high accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.
STANDARD
Human interface operation panel offers easy operation of machine.
Machine featured as manual pipe loading,automatic clamping,automatic notching and manual unloading.
All the parts are made under very strict quality control, so the quality of machine is in high level and the specification is standardized.
Available pipe material: steel, stainless, aluminum, titanium and brass...
The design of the tooling help customer easy to change.
Water cooling system ensures the equipment long-time work stably under the high temperature.
CE&ISO 9001:2000.
Pipe Chamfering Machine
Pipe Chamfering Machine
Model:EF-52AC
Chamfering Capacity:16-52mm(Standard);
�?�16mm(customized)
Air Pressure:6-8Kgf/c�?�
Chamfering Motor Power:1.5 Kw
Control Method:Pneumatic
SLS Single Head Pipe Chamfering Machine also know as pipe beveling machine is a special kind of pipe end smooth machine. It is a kind of semi-automatic machine with manual feeding,automatic chamfering and automatic clamping driven by pneumatic.Chamfering process can be finished at one time in fast speed and accurate chamfering requirement. Clamp device and knife holder are precisely designed for ensure the center line between work-piece and knife holder at the same level. We keep many chamfering machinesin stock for quick shipments.
Features
A circular tube modifies an interior angle,an external angle and flat plane at one time with fastness and precision.
Automatic and manual working mode which are convenient for adjusting the machine,mold and chamfering knife.
Material Available: Carbon Steel,Stainless Steel,Copper,Aluminum..
Each process of chamfering work is driven by pneumatic.
Clamp device and knife holder are precisely designed for ensure the center line between workpiece and knife holder at the same level.
Dual Feed Chamfer system:
First speed------Fast forward movement nearly to tube end to save the time.
Second speed---Infinitely variable forward adjustable Chamfering speed to get smooth finish.
Good mechanical parts ensure machine runs in high stability
CNC cutting machine for cutting soft materials like fabric, and leather, etc., automatic oscillating knife cutting machine, Intelligent CNC, no need knife dies, reducing costs and increasing efficiency.
Maximum Turning Diameter 12mm
Maximum Turning Length 100mm
Spindle Size Up to 12mm
Spindle Motor Power Fanuc Continuous 1-2hp/415v
Spindle Motor Power Fanuc 30 Min 2hp
Max Spindle Speed 1440rpm
Standard Chuck Size 12mm
X-Axis Stroke 100
manualy multi drilling machine as per your reqiurment
