Glue Labeling Machine

Model PSX-400

Technical Parameter

1.Capacity24000BPH.(500ML).

2.Bottle MaterialPET,Glass,MetalPEHDPE.


3.Label Roll Inner Diameter6 inches (152 mm).

4.Bottle Diameter30-200 mm.

5.Bottle Height100-500 mm.

6.Label Height10-250 mm.

7.PowerAC 3, 380V/50HZ.

8.Air Consumption3-6 kg/cm²

9.Power Consumption16 KW.

10.Main machine size: 2200L*2500W*2000H(mm).

Features:

1.Auto cutting and Sticking circle or half circle of bottle. Auto melting and attaching glue on top and rear of the label , glue auto recycling .

2.Variable speed control system, synchronous automatic detection system, automatic adjust production speed, Always make the labeling machine at best production speed


3.Star Wheel separation and feeding ,correlation design transmission mode high-speed labeling, stable precision.

4.Servo motor synchronous tracking, with special designed vacuum drum adsorption, labeling precise and stable

5.Abnormal situation, this machine has safety device, automatic stop immediately.

6.Following conditions the machine will automatically stop and alarm:
(1) Label is not labeled on bottles
(2)Label sticker failure
(3)Label is about to run out
(4)Abnormal bottle feeding
(5)Abnormal bottle out
(6)Abnormal bottle jam

7.The whole machine centralized lubrication system, easy to clean, lubrication and maintenance.

8.Techmach electronic automatic rectify guide system, digital electronic eye for ultrasound method.Non-contact electric eye, automatically adjust the label location. (optional).

9. Label top and end difference within 2mm ( without Techmach), 1mm with techmach

SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding.



Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency.



Machine Highlights:

1. Servo driven and with accurate automatic loop tension control

2. Can handle a wide range of roll wide: 330, 450 and 570mm

3. Glue free system can be selected

4. Both Blank label and printed label are available

5. Precision cut in gap of finished label rolls

6. Servo motor control Mechanical arm automatic feeding system

7.Petal type holder: easier for the adjustment, not be easier loosen

8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor.

9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission.



The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder):

1:No creases

2:Zero waste

3:save glue cost

4:save electricity consumptions

5:max rewinding max at 300mm diameters

6:die cutting scrapping waste by mini 1mm

7: non stop no need material storage rack can realized no need decreasing the speed then cutting

8: servo driven for the precision cut into gap at high speed

9: servo driven for the die cutting into the dotted line

10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least





Specification:

Machine Model: SZ-330 SZ-450 SZ-570

Max rewinding diameter (glue type):350mm 350mm 350mm

Max rewinding diameter (glue free): 300mm 300mm 300mm

Max Paper feeding: 330mm 450mm 570mm

Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min

Mini rewinding width: 30mm 30mm 30mm

Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ

Power: 13 kw 13 kw 13kw

Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min

Machine Dimensions:

2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free)

2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free)

2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free)

Machine weight:

2500 kgs (glue type) 3500 kgs (glue free)

2500 kgs (glue type) 3500 kgs (glue free)

2800 kgs (glue type) 3800 kgs (glue free)

Frequency: 20KHZ
Voltage: 220V, 50/60 Hz
Power: 1200W
Dimension: 1200*550*1500mm
Weight: 55KG
Productivity: 30~60 times/min

Product Description

Gluer Machine Applicable Paper Width: 1,400-2,300 mm

Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;

Product Description

Gluer Machine Applicable Paper Width: 1,400-2,300 mm

Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;
7. Layered independent frequency conversion motor, synchronous belt transmission and relatively independent control are used in the power part to ensure the precision of transmission and to greatly reduce the vibration and noise during operation;
8. Layered independent adjustment and touch panel man-machine interface control are employed, so the adjustment and control are more flexible and directviewing;
9. The floating roller of the pre-heating cylinder is electrically adjustable (this function is optional to users) to facilitate paper passing through and adjustment of angle of contact.
GLD6A glue applying machine for 2-layer corrugated cardboard.


Paper Width External Dimensions
Weight
(T) Whole Machine Power