G/Y4-73 series boiler centrifugal is suitable for 2-670T/h steam boiler in the thermal power plant. If no special requirements, G4-73 is also used for mine ventilation and general ventilation, ventilation fan is delivering air, the highest temperature does not exceed 80. Induced draft fan is delivering flue gas, and the highest temperature does not exceed 250. Dust removal device must be installed in front of the induced draft fan, according to the use of the general power plant, the dust and hard particles is 150g/m3. Design temperature of G4-73 is 20, design temperature of Y4-73 is 140.
We can design and manufacture G/Y4-73series with Â
1.Corrosion-proof,high temperature fan
2.Overall damping bracket fan
Technical Data
Experience the farm-fresh difference of our Australian cream cheese. We craft our cream cheese with fresh milk & cream for a super smooth & soft texture that makes our cream cheese easy to use straight from the fridge.
Our velvety soft cream cheese is expertly crafted at our specialist cream cheese site. Whether it's a sweet or savoury snack or for entertaining guests with a fresh homemade cheesecake, our Australian farm-fresh cream cheese will bring out the best in your next meal creation.
250g Spreadable Tub
Excellent as a spread for breakfast, lunch or a quick snack any time of the day. Velvety smooth texture that makes it easy to spread on any sweet or savoury base.
Ingredients: Milk, Cream (From Milk), Texturiser (Emulsifier (471), Milk Solids, Stabilisers (410, 412)), Salt, Starter Culture.
Allergen Statement: Contains Milk
Nutritional information
Average Quantity
per serving % Daily Intake*
per serving Average Quantity
per 100g
SERVINGS PER PACKAGE: 10
SERVING SIZE: 25g
Energy 310 kJ 4 % 1240 kJ
Protein 2.2 g 4 % 8.9 g
Fat - total
- Saturated 7.1g
5.0g 10%
21% 28.3 g
20.0 g
Carbohydrate
- Sugars Less than 1.0g
Less than 1.0g Less than 1%
1% 2.6 g
2.5 g
Sodium 73 mg 3 % 290 mg
Product Name: Milk Powder Non Dairy Creamer In 25kg Package
Non dairy creamer is white or creamy powder dried by spray with fluidity and stability. It is designed for rapid direct dispersion into hot consumer use beverages such as instant coffee, black tea, milk tea, cereal, seasoning & soup and infant formula. It can not only improve the color of coffee and tea, but also can make the taste flavor smoothness..
Non dairy creamer Series we have
Type Product Name Shelf life Package 20GP(KG)
35%Fat 1%Protien Non Dairy Creamer 24 months 25 KG/BAG 14000
35%Fat 1.5%Protien Non Dairy Creamer 24 months 25 KG/BAG 14000
35%Fat 2%Protein Non Dairy Creamer 24 months 25 KG/BAG 14000
35%Fat 2.5%Protien Non Dairy Creamer 24 months 20 KG/BAG 12000
28%Fat 1%Protein Non Dairy Creamer 24 months 25 KG/BAG 14000
28%Fat 2%Protein Non Dairy Creamer 24 months 25 KG/BAG 15500
32%Fat 2%Protein Non Dairy Creamer 24 months 25 KG/BAG 15500
60%Fat 2.5%Protein Non Dairy Creamer 24 months 25 KG/BAG 14000
73%Fat 3.0%Protein Non Dairy Creamer 24 months 25 KG/BAG 14000
Specification Of Non Dairy Creamer
Items Standards
Appearance White powder
Odor and taste Characteristic cream smell
Water (%) â?¤5.00
Fat (%) 35�±2
Carbonhydrate(%) N/A
Protein(%) 2%�±0.1%
Ash(%) â?¤2.0%
Total plate count(cfu/g) â?¤10,000
E.Coliform(MPN/100g) â?¤30
Pathogen Negative
Conclusion: The product conforms to the standard .
Packaging: 25 KG/BAG
Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
G/Y6-41 series boiler centrifugal induced draft fan are featured with low noise, high performance, smooth operation of transmission group, high reliability and high institutions operating life.
Suitable for various coal-fired industrial boilers equipped with smoke and dust removal apparatus drum/induced draft fan system, drum fan transport medium is air, the maximum temperature does not exceed 80â??, induced draft fan transport medium is flue gas, the maximum temperature not exceed 250â??. Dust removal device must be installed in front of this fan to minimize flue gas dust contents.
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
3420 G Y4 73 Series Boiler Centrifugal Fan Suppliers
Short on time? Let G Y4 73 Series Boiler Centrifugal Fan sellers contact you.
1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating.
2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth.
2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc.
3. Packaging: 100M / roll (or customized as required).
4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C
5. Specification and model: bfw16 * 20-100 (120)
BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement
16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively;
100: the width of the fabric is 100 cm;
(120): the mass per unit area of fabric is 120 g / m2.
BFNP5*5-200(160)
BFNP: basalt fiber mesh cloth (coated and shaped);
5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm;
200: the width of the grid is 200 cm;
(160): the weight of grid cloth per unit area is 160g / m2.
I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0
Video Interface: VGA, HDMI
Audio interface: headphone / microphone combo interface
Other interfaces: RJ45 (network interface), power connector
Reader: Multi-in-1 card reader
Input Devices Pointing device: Touchpad
Keyboard Description: Full-size keyboard
Power Description Battery: 6-cell lithium battery, 5900 mA
Life time: 5 hours, the specific time depending on use environment
Power adapter: 100V-240V 90W AC power adapter adaptive
Exterior Laptop Weight: 2Kg
Length: 339.2mm
Width: 239.5mm
Thickness: 26.4mm
Shell material: composite material
Case Description: Black
Notebook accessories Packing list: Host x1 notebook
Power adapter x1
Power cord x1
Manual x1
Warranty card x1
D G EXIM is well positioned in the water treatment business and technically geared to tailor-make solutions to any water treatment requirements. Every situation is analyzed based on the elements present and a unique solution is offered. We supply chemicals for Boiler Treatment, Cooling Tower and Portable Water Treatment as well AS Effluent Treatment. Below you will find some of the water treatment chemicals we supply
1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating.
2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth.
2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc.
3. Packaging: 100M / roll (or customized as required).
4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.
5. Specification and model: bfw16 * 20-100 (120)
BFW: basalt fiber fabric;
16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively;
100: the width of the fabric is 100 cm;
(120): the mass per unit area of fabric is 120 g / m2.
BFNP5*5-200(160)
BFNP: basalt fiber mesh cloth (coated and shaped);
5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm;
200: the width of the grid is 200 cm;
(160): the weight of grid cloth per unit area is 160g / m2.
POPULA Fan Steam Boiler Induced Draft Y9-38D Boiler Centrifugal Induced Draft Fan
Product Introduction:
It is designed to fit the equipment of 0.5-35t industries boiler which equipped with preheated and dust-removal fixture , suitable for the industrial boiler with the similar suction condition and the compatible performance . But the temperature of air must be below 250â??. Before installation . the fan must equip with the dust-removal fixture whose dust removing efficiency shall not beneath 85% .With access 1o lower the amount of dust in the flue gas,the far will reduce environmental pollution .Moreover , it can reduce wear so as to enhance the service life of the fan.
PRODUCTS INFO:
Type:POPULA Boiler centrifugal induced draft fan Y9-38
Brand:POPULA
Electric Current:AC
Power:5.5~315 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:3297~139712 CMH
Air Pressure:1402~5805 Pa
Speed:730-2900 rpm
Max Noise:
POPULA Fan Centrifugal Heat Dissipation Y5-48C Boiler Centrifugal Induced Draft Fan
Product Introduction:
It is designed to fit the equipment of 1-20t/h industries boiler and civil boiler of which equipped with the dust-removal fixture.Before installation , the fan must equip with the dust-removal fixture whose dust removing efficiency shall not beneath 85% . The temperature of air must be below 250 Our company can provide the stainless steel heat boiler centrifugal blower , when the temperature of air must exceed 250
PRODUCTS INFO:
Type:POPULA Boiler centrifugal induced draft fan Y5-48
Brand:POPULA
Electric Current:AC
Power:3-110 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:2065~67803 CMH
Air Pressure:1097-4483 Pa
Speed:1000-3550 rpm
Max Noise:
STRONBULL Industrial Boiler Centrifugal Fan Y9-38 high pressure high temperature Induced Draft fan
PRODUCTS INFO:
Type:STRONBULL Industrial Boiler Centrifugal Fan Y9-38
Brand:STRONBULL
Electric Current:AC
Power:5.5-280 kw
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:3297 -139712M3/h
Air Pressure:1402 - 5805 Pa
Speed:960r/min ,1450r/min,2960r/min
Max Noise:
Essential details
Place of Origin:
AUSTRIA
Brand Name:
Aluminum scrap
Model Number:
Aluminum scrap
Type:
Aluminum Can
Weight:
25
Al Content (%):
99
Product name:
Aluminium Wire Scrap 6063 Grade
Material:
Alloy 6063
Aluminum scrap:
Pure 99.9% Aluminium Ubc Scrap Aluminium Scrap
Color:
Siliver
Quality:
Excellent
Grade:
GRADE
Application:
Recycling Material
Supply Ability
Supply Ability
5000 Ton/Tons per Week
Packaging & delivery
Packaging Details
As buyers requirements
Port
Worldwide
Lead time:
Quantity(tons) 1 - 500 >500
Lead time (days) 7 To be negotiated
Specification
Specification
item
value
Place of Origin
AUSTRIA
Brand Name
Extrusion Scrap
Type
Aluminum Tense
Weight
25kg
Al Content (%)
99.99%
Product Name
Pure Aluminum Extrusion Scrap
Series
Alloy 6000, 6063 Series
Color
Silvery White Metal
Al (min)
99%-99.97%
Grade
AA; Typical
Chemical Composition
Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn
Density
2.7 g/cc
Ultimate Tensile Strength
241 MPa
Tensile Yield Strength
214 MPa
Application
Tech Industry
Product Characteristic
Model: Model Y5-48 Boiler Centrifugal Induced Draft Fan
Flow:2065-67803m3/min
Shaft power:2.2-110KW
Pressure:742-4483Pa
Port Dia:355-1120A mm
Rotating Speed:1000-3550r/min
Product Introduction
Model Y5-48 boiler centrifugal induced draft fan is designed for industrial boiler (1~20T/h) which burns all kinds of coal and is equipped with dust removal device.It is suitable for anywhere with appropriate intake condition and corresponding performance,but the maximum temperature should not exceed 250ºC.
In front of induced draft fan,it must set a dust elimination device to reduce the dust content of the smoke gas into the fan.According to the general usage of power plant,the dust elimination efficiency is not less than 85%.
In consideration of economy of the fan, triangle belt(C type)transmission is adopted,which can not only meet the requirement of the same tonnage boiler configuration of all kinds of dust remover with different rotating speed of one machine number, but also reduce the fan series and machine number.And It is convenient for user according to the actual situation, to choose different rotating speed to obtain the required and more ideal flow as well as pressure.
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
