Fused Cast Azs Block Suppliers and Manufacturers

RTK-AZS33 has an excellent performance preventing contamination due to molten glass and reduces the creation of stones, bubbles and exudation of the matri glass. it is applicable to super structure of melting tank, sidewall, paving block and forehearth, etc.

Fused cast azs block has strong glass corrosion resistance and high thermal shack stability. The products are adopting superior material, with process by special arc furnace forming it. This fuse cast technology got nearly no suffers from electrode pollution. Application Can be used at parts where chemical erosion is serious and temperature changes frequently, such as fire spurting mouth and regenerator joints, end port of furnace etc Wooden pallets

Fused cast AZS major include model AZS-33; AZS-36; AZS-41. the different model applicated in different parts of furnaces. AZS block 33#,a normal refractory material, with the features of very good melting glass resisting, Which seldom produces stone or other faults, and has little possibility to produce bubbles. And it is widely used in glass Indaustrial furnace. AZS block 36#:has more free baddeleyite crystals in chain structure and less vitreous phase, which further improve the corrosion resistibility and reduce the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS block 41#:has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.

AZS Bricks, Alumina-Zirconia-Silica (AZS) refractories, belong to sintered ZrO2_Al2O3_SiO2 products family along with Zircon Mullite, Bonded AZS, Zirconia Corundum, and Rebonded Fused Mullite bricks. Sintered ZrO2-Al2O3_SiO2 products such as AZS have good resistance to alkali vapor and thermal shock. Mainly used in glass furnaces, they can withstand aggressive conditions in contact with molten glass. Typical applications are superstructures, skew blocks, wall bricks and upper-checker in regenerators, paving, sub-paving, and forehearth blocks in float glass furnaces. Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces. AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace. AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.

Our fused cast AZS #41 block has the most corundum-baddeleyite eutectic crystals among the electro-fused Al2O3-ZrO2-SiO2 series products. Its corrosion resistance is the best and therefore its normally recommended to be used in quick wear positions to prolong the furnace life. It is the most widely used material both in glass contact and superstructure of glass melting furnaces. Mainly applicable for sidewalls, doghouses, throat, bottom budding, dam blocks, electric block corners, and also linings of furnace in industries. Our product has passed ISO international certification, it is made from high pure material, fired at high temperature by advanced technology, with the advantages of high strength, high compression resistance, good thermal shock resistance, good performance in high temperature, good thermal conductivity, good erosion resistance and so on. This product is available in a large size straight and special shapes which are available for special machining processes. We basically have three casting methods: PT, ZWS and WS, different required castings are manufactured accordingly.

Besides having the similar eutectic crystal as AZS#33 block, our AZS#36 block has more free baddeleyite crystals in chain structure and less vitreous phase, which further improving the corrosion resistance and reducing the potential defects, therefore, the erosion resisting of our AZS#36 block is further strengthened, it is recommended to be used in areas where melting glass flows faster and the temperature is higher, such as melter sidewall, paving, doghouse, etc. We basically have three casting methods: PT, ZWS and WS. Our AZS#36 block has features of strong glass corrosion resistance and high thermal shack stability; good RUL, wear-resistance, dregs-resistance and alkali corrosion resistance; moreover, our product is adopting superior material, with process by special arc furnace forming, thus such fused cast technology has almost no suffer from electrode pollution.

Our fused cast AZS#33 block has dense micro structure which ensures its good resistance in glass liquid. It is widely applied to glass furnace for superstructure, working pool side wall, paving blocks, feeder channels, tank bottoms, c-shaped block and doghouse crown,etc. AZS#33-PT NORMAL FILLING Normal Filling (PT) fused cast AZS#33 block is most widely used in working end, feeder channel, superstructure and top crown parts. Recommended Application: superstructure, working end and feeder channel .etc. Shapes and Size: � It can be made into different shapes and sizes,� such as feeder channel bricks, peephole, tuck stone, crown , blast nozzle bricks. AZS#33-QX ORIENTED CAVITY Oriented Cavity ( QX ) AZS 33# block is most widely used in glass melting furnace side wall part . AZS#33-WS VOID FREE Void Free (WS ) AZS-33 # block is most widely used in sidewall, tank bottom, feeder channel, c-shaped bricks, Doghouse crown, superstructure .

Zircon Corundom Mullite bricks are made of raw materials such as high-grade mullite grog and Australia imported zircon sand, which is melted and casted in high temperature electric furnace. It is mainly used in areas that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnace, the tapping platform (tapping spout) fortapping platform (tapping spout)style walking beam furnaces, and also as the interior for destructors.

Fused cast AZS major include model AZS-33; AZS-36; AZS-41. the different model applicated in different parts of furnaces. AZS block 33#,a normal refractory material, with the features of very good melting glass resisting, Which seldom produces stone or other faults, and has little possibility to produce bubbles. And it is widely used in glass Indaustrial furnace. AZS block 36#:has more free baddeleyite crystals in chain structure and less vitreous phase, which further improve the corrosion resistibility and reduce the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS block 41#:has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life. 2.Certificate of used Cast AZS block advantages: 1.Best erosion resistance 2. not easy to generate smal bubble 3. good thermal shock resistance 4. stable performance for furnace 5. suitable for structure 6. long service time

The glass is mainly made of silica sand and soda ash as raw materials which are melted at a high temperature. Glass melting furnaces are thermal equipment for melting glass and are usually constructed of refractory materials. Glass melting furnaces can be divided into two categories: pool kiln and crucible kiln. The pool kiln is the most commonly used kiln type in the glass industry. It is made of refractory materials, and has a flame pool kiln and an electric kiln. Casting zirconium corundum bricks are commonly known as white iron bricks. It is the most important refractory material to ensure the normal operation of the glass melting furnace. At present, the melting rate of the glass melting furnace at home and abroad is increased, the kiln age is extended, and the fuel consumption is reduced mainly due to the use of the refractory material. The use of fused zirconium corundum brick in the glass melting furnace is to build the upper pool wall, small furnace flat raft, small furnace raft, stone raft and chest wall. Fused cast blocks usually named zircon corundum brick also name AZS bricks( alumina zircon silica ),according to the ZrO2 content difference ,can be named AZS 5.5 ,AZS 12 .AZS 33, AZS 36, AZS 41 and so on. Beside because this type bricks are produced by special electric furnace by model, we also called this products Fused cast AZS bricks. Also according to the brick if have shrinkage cavities, we call them PT, QX, ZWS, WS. These bricks are widely used for iron & steel furnace and glass furnace, also chemical industrial furnace, especial in the glass furnace, you will find it usually.

The glass is mainly made of silica sand and soda ash as raw materials which are melted at a high temperature. Glass melting furnaces are thermal equipment for melting glass and are usually constructed of refractory materials. Glass melting furnaces can be divided into two categories: pool kiln and crucible kiln. The pool kiln is the most commonly used kiln type in the glass industry. It is made of refractory materials, and has a flame pool kiln and an electric kiln. Casting zirconium corundum bricks are commonly known as white iron bricks. It is the most important refractory material to ensure the normal operation of the glass melting furnace. At present, the melting rate of the glass melting furnace at home and abroad is increased, the kiln age is extended, and the fuel consumption is reduced mainly due to the use of the refractory material. The use of fused zirconium corundum brick in the glass melting furnace is to build the upper pool wall, small furnace flat raft, small furnace raft, stone raft and chest wall. Fused cast blocks usually named zircon corundum brick also name AZS bricks( alumina zircon silica ),according to the ZrO2 content difference ,can be named AZS 5.5 ,AZS 12 .AZS 33, AZS 36, AZS 41 and so on. Beside because this type bricks are produced by special electric furnace by model, we also called this products Fused cast AZS bricks. Also according to the brick if have shrinkage cavities, we call them PT, QX, ZWS, WS. These bricks are widely used for iron & steel furnace and glass furnace, also chemical industrial furnace, especial in the glass furnace, you will find it usually.

What's Fused Cast The term Fused Cast refers to a manufacturing process in which the ceramic bonding is obtained by the solidification of a mixture which has been melted in an electric furnace and cast in liquid state into molds. Fused Cast AZS Blocks Introduction AZS fused cast block is also called fused cast block which is abbreviated as AZS because it contains Al2O3ZrO2SiO2. Fused cast AZS block is made from pure alumina powder and Zircon sand (composed of 65% zirconia and 34% SiO2). After Alumina powder and zircon sand melting in electric furnace, they are cast into various molds and cool themselves down to become white solid. Because of the different content of Zirconia from 33%-41%, our fused cast AZS blocks can be divided into three types 33,36 and 41. TY-AZS33 Description Fused cast AZS 33 block has dense micro structure which ensures its great resistance in glass liquid, thus you donâ??t have to worry about the solidification and other problems. It is widely applied to glass furnace for superstructure, working pool side wall, paving blocks, feeder channels, tank bottoms, C-shaped block and doghouse crown,etc. Advantages 1. Compact microstructure 2. Good erosion resistibility to molten glass 3. Good thermal shock resistibility,high compression resistance 4. Barely rendering blister 5. A variety of formats and shapes for furnace different working areas

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

Magnesia chrome brick is an alkaline refractory product, which is made of periclase and magnesia chrome spinel, and is fired at 1600~1800 �C in an oxidizing atmosphere. It can also be made into non-burned brick by chemical bonding agent such as water glass. According to the raw materials and process characteristics of the products, it can be divided into silicate-bonded magnesia-chrome bricks, direct-bonded magnesia-chromium bricks, re-combined magnesia-chrome bricks, semi-recombined magnesia-chrome bricks, pre-reacted magnesia-chrome bricks Casting magnesia chrome bricks. The magnesia chrome brick can be used in vulnerable parts of steelmaking electric furnace, RH, DH vacuum degassing device, secondary refining slag line parts such as VOD, LF, ASEA-SKF, AOD, steelmaking converter, cement rotary kiln and glass melting Kiln regenerators, etc.

AZS brick use high purity zircon, alumina and silica as its raw material. Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces. AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace. AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.

The glass is mainly made of silica sand and soda ash as raw materials which are melted at a high temperature. Glass melting furnaces are thermal equipment for melting glass and are usually constructed of refractory materials. Glass melting furnaces can be divided into two categories: pool kiln and crucible kiln. The pool kiln is the most commonly used kiln type in the glass industry. It is made of refractory materials, and has a flame pool kiln and an electric kiln. Casting zirconium corundum bricks are commonly known as white iron bricks. It is the most important refractory material to ensure the normal operation of the glass melting furnace. At present, the melting rate of the glass melting furnace at home and abroad is increased, the kiln age is extended, and the fuel consumption is reduced mainly due to the use of the refractory material. The use of fused zirconium corundum brick in the glass melting furnace is to build the upper pool wall, small furnace flat raft, small furnace raft, stone raft and chest wall.

These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.