Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
16047 Eltek Dcs Fp48 Suppliers
Short on time? Let Eltek Dcs Fp48 sellers contact you.
Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator
Lithium batteries, tubular batteries, tubular gel batteries, inverters, home ups, off grid inverters, hybrid inverters, grid tie inverters, solar panels, solar charge controllers, variable frequency drives, energy storage system..
Construction equipment (home improvement, electrical supply, pipes and fitting etc..), heavy machinery: mining equipment, excavator, drilling, and so on
paper and packaging, production line: kraft paper, plastic and paper box, aluminum foil, plastic wrap, boxes, paper cups, take a way box and so on..
renewable energy: solar panels, inverter, photovoltaic chemical and raw material: soda ash, titanium, pe, ppe.Our company hangzhou xing ying technology co., ltd.(astrioglobal) also provides exporting, quality control, international logistics and consulting/negotiation.
INPUT DATA
Voltage range 20 - 75 VDC (shutdown < 16.5VDC)
Current (maximum) 70 ADC (85 ADC during boost)
Protection Fuse and reversed polarity protection
OUTPUT DATA
Voltage (default) 26 VDC 53 VDC
Voltage (adjustable range) 24 - 28 VDC 48 - 58.5 VDC
Power (maximum) @ VIN > 26 VDC / VIN = 18 VDC
Power boost 15s / 10min recovery (VIN > 25VDC)
1350 W / 910 W
2000W
Current (maximum)
Current boost 15s / 10min recovery (VIN > 25VDC)
56 A
84 A
28 A
42 A
Static Voltage regulation (0 - 100% load) �±1% �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 30ms
Ripple, 20MHz bandwidth < 200 mVpp
Protection Short circuit proof, OR-ing diode, High-temperature protection, Hot plug-in inrush current
limiting, Overvoltage Shutdown
Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart Inverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V - 500V
AC Output 220V -Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase
Technical Specifications
Feature Description
Maximum Power 6.2 kW (6200 Watt)
System Voltage 48V DC
MPPT Solar Charge Controller 120A (Wide Input Voltage Range)
Waveform Pure Sine Wave
AC Output Voltage 220-230V (�±%2)
Input Voltage (PV) 120V - 500V DC
Smart Modes Solar Priority / Battery Priority / Grid Priority
Sales to Grid Yes (On-Grid Hybrid Mode)
Display Large LCD screen + detailed menu
Protection Features Overload, short circuit, high temperature, low battery etc.
Technical Specifications
Np Power 6.2 kW Off-Grid Smart Inverter
Nominal Output Power 6200 Watt
Output Waveform Pure Sine Wave
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 120A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 6500 Watt
Max. PV Input 500V DC
Working Temperature -15 -60 Degrees
Dimensions 358*295*105 - 8.7 KG
2 Year Warranty
Single Phase
Technical Specifications
Np Power 3.5 kW Off-Grid Smart Inverter
Nominal Output Power 3500 Watt
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 100A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 4000 Watt
Max. PV Input 500V DC
Working Temperature -10-55 Degrees
Dimensions 330*278*98 4.4 KG
2 Year Warranty
Eastman advanced Grid Tied inverters seamlessly convert solar energy into a reliable power source, ensuring a continuous and efficient supply for your needs.
"Type: Food Additives
Origin: China
CAS No.: 63-42-3
AUCO No.: 919
Packing: 25kg bag"
Items Standard
Identification A The infrared absorption spectrum of the sample is concordant with that of the standard.
Identification B The principal spot obtained from the Test solution corresponds in appearance and RF value to that obtained from Standard solution A
The test is not valid unless the chromatogram obtained with Standard solution B shows four clearly discernible spots, disregarding any spots at the origin.
Identification C A red color develops.
Specific optical rotation +54.4~+55.9, calculate on the anhydrous basis
Acidity or alkalinity Add 0.3ml of phenolphthalein TS: the solution is colorless, and not more than 0.4 ml of 0.1 N sodium hydroxide is required to produce a red color.
Water Not more than 1.0%
Residue on ignition Not more than 0.1%
Heavy metals The limit is 5µg per g.
Protein and light-absorbing impurities The absorbance divided by the path length in centimeters is not more than 0.25 in the range of 210 to 220nm and is not more than 0.07 in the range of 270 to 300nm.
TPC <100cfu/g
Yeast & Mould <50cfu/g
Escherichia coli (/10g) absence
Conclusion : The Quality of lactose product has the achieved scandard of USP40 after examination standard examination, and consequently meet the provision.
Color Take an appropriate amount of sample in the white shallow dish on the natural light line, observe, white to light yellow.
Taste smell Take an appropriate amount of sample in the white shallow dish in natural light, observe, slightly sweet and odorless.
State of organization Take an appropriate amount of the sample in the white shallow disk in natural light, observe, crystal or powder crystal.
Lactose a (In the dry basis)/(g/100g) A lactose content according to (100- water-ash)/(100-water) calculation. 99.0
Water/(g/100g) 6.0 (GB 5009.3-2010 Karl fisher method)
Ash/(g/100g) 0.3 (GB 5009.4)
PH/(10% aqueous solution) Take 10g of lactose in 100ml beaker, add distilled water into 10% water solution,with a pH measuring the value of pH. 4.5-7.0.
Conclusion : The quality standard test of this food lactose is in accordance with the regulations.
16047 Eltek Dcs Fp48 Suppliers
Short on time? Let Eltek Dcs Fp48 sellers contact you.
