Eltek Flatpack2 Dc/dc 24V 1350W

ELTEK FLATPACK2 DC/DC 18-75/48V1350W Rectifier Module 241115.602

INPUT DATA
Voltage range 20 - 75 VDC (shutdown < 16.5VDC)
Current (maximum) 70 ADC (85 ADC during boost)
Protection Fuse and reversed polarity protection
OUTPUT DATA
Voltage (default) 26 VDC 53 VDC
Voltage (adjustable range) 24 - 28 VDC 48 - 58.5 VDC
Power (maximum) @ VIN > 26 VDC / VIN = 18 VDC
Power boost 15s / 10min recovery (VIN > 25VDC)
1350 W / 910 W
2000W
Current (maximum)
Current boost 15s / 10min recovery (VIN > 25VDC)
56 A
84 A
28 A
42 A
Static Voltage regulation (0 - 100% load) �±1% �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 30ms
Ripple, 20MHz bandwidth < 200 mVpp
Protection Short circuit proof, OR-ing diode, High-temperature protection, Hot plug-in inrush current
limiting, Overvoltage Shutdown

Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.

Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.

Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design

Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel

Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.


Rated output power: 50KW
Rated energy: 75KWH

Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms

Apex Smart Inverter

Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart Inverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V - 500V
AC Output 220V -Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase

Apex is an Electrozirve brand

Apex Eco 6.2 kW Hybrid Smart Inverter

Technical Specifications
Feature Description
Maximum Power 6.2 kW (6200 Watt)
System Voltage 48V DC
MPPT Solar Charge Controller 120A (Wide Input Voltage Range)
Waveform Pure Sine Wave
AC Output Voltage 220-230V (�±%2)
Input Voltage (PV) 120V - 500V DC
Smart Modes Solar Priority / Battery Priority / Grid Priority
Sales to Grid Yes (On-Grid Hybrid Mode)
Display Large LCD screen + detailed menu
Protection Features Overload, short circuit, high temperature, low battery etc.

Apex is a brand of Electrozirve

Np Power Smart Inverter

Technical Specifications
Np Power 6.2 kW Off-Grid Smart Inverter
Nominal Output Power 6200 Watt
Output Waveform Pure Sine Wave
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 120A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 6500 Watt
Max. PV Input 500V DC
Working Temperature -15 -60 Degrees
Dimensions 358*295*105 - 8.7 KG
2 Year Warranty
Single Phase

Technical Specifications
Np Power 3.5 kW Off-Grid Smart Inverter
Nominal Output Power 3500 Watt
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 100A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 4000 Watt
Max. PV Input 500V DC
Working Temperature -10-55 Degrees
Dimensions 330*278*98 4.4 KG
2 Year Warranty